Physical and Chemical Changes in Hydrothermally Modified Wood

In this study, the simulation of artificial conditions, containing various chemical additives similar to a bog environment, was hypothesised as a relatively short way to develop a more sustainable wood product with better properties. This study aimed to determine how hydrothermal treatment with different iron additives with and without tannic acid, performed at 100 °C for 75 h, changed the mass and density of wood of different tree species (Pinus sylvestris L., Picea abies (L.) H. Karst., Pseudotsuga menziesii (Mirb.) Franco, Juglans regia L., and Acer platanoides L.); total phenolic compounds in biobased solvents after the hydrothermal processing andiron concentration in different wood layers. We also aimed to determine the wood chemical composition using Fourier-transform infrared technique. The study results showed that the softwood samples were more susceptible to hydrothermal modification than the hardwood samples, indicated by minorly different intensities on infrared spectra. The FTIR results showed bands of hardwood and softwood samples which along with the spectral characterisation of the wood constituents, which can further be utilized for creating a larger FTIR spectral database of wood samples for their identification. The factors with the most significant effect on the hydrothermal modification were tannic acid and inorganic Fe3O2 salt, used as an additive. The results indicated the suitability of inorganic Fe3O2 salt and tannic acid combination applied in this type of modification, because a higher concentration of iron was distributed on the inner and intermediate sublayers of wood samples. The hydrothermal modification approach to anchor tannic acid–Fe macromolecules in wood shown in this study has promising capabilities and may attract interest in the field of wood protection against weathering.

Anion Composition of Apatite in the Au-Cu Epithermal Deposit of Palai-Islica (Almería, SE Spain) as an Indicator of Hydrothermal Alteration

The Palai-Islica deposit (Almería, SE Spain) is an Au-Cu epithermal deposit hosted in Neogene calc-alkaline andesites and dacites from the Cabo de Gata-Cartagena volcanic belt in the Betic Cordillera. Major element compositions of apatite from Palai-Islica orebody and related hydrothermally altered and unaltered volcanic rock from the region hosting the deposit were obtained to clarify the processes involved in their formation. Apatite in the host volcanic rocks is rich in chlorapatite and hydroxylapatite components (50–57% and 24–36%) and poor in fluorapatite components (12–21%), indicating assimilation processes of cortical Cl-rich material in the magmatic evolution. Apatite in the orebody sometimes has corrosion textures and is mostly fluorapatite (94–100%). Apatite from the hydrothermally altered host rock of the orebody systematically bears signs of corrosion and has variable and intermediate fluorapatite (19–100%), chlorapatite (1–50%), and hydroxylapatite (0–47%) components. The style of zonation and the composition are related to the proximity to the orebody. These features can be interpreted as the result of hydrothermal modification of high Cl, OH-rich volcanic apatites into F-rich apatites. The enrichment of F is related to the intensity of hydrothermal alteration and could therefore constitute a geochemical index of alteration and of mineralization processes.

Hydrothermal Modification of Wood: A Review

Wood is a versatile material that is used for various purposes due to its good properties, such as its aesthetic properties, acoustic properties, mechanical properties, thermal properties, etc. Its poor dimensional stability and low natural durability are the main obstacles that limit its use in mechanical applications. Therefore, modification is needed to improve these properties. The hydrothermal modification of wood exposes wood samples to elevated temperatures and pressure levels by using steam, water, or a buffer solution as the treating medium, or by using superheated steam. Abundant studies regarding hydrothermally treated wood were carried out, but the negative effect on the wood’s strength is one of the limitations. This is a method that boosts the dimensional stability and improves the decay resistance of wood with minimal decrements of the strength properties. As an ecofriendly and cost-effective method, the hydrothermal modification of wood is also a promising alternative to conventional chemical techniques for treating wood. Researchers are attracted to the hydrothermal modification process because of its unique qualities in treating wood. There are many scientific articles on the hydrothermal modification of wood, and many aspects of hydrothermal modification are summarized in review papers in this field. This paper reviews the hydrothermally modified mechanical properties of wood and their potential applications. Furthermore, this article reviews the effects of hydrothermal modification on the various properties of wood, such as the dimensional stability, chemical properties, and durability against termites and fungi. The merits and demerits of hydrothermal wood modification, the effectiveness of using different media in hydrothermal modification, and its comparison with other treating techniques are discussed.

Effect of Single and Dual Hydrothermal Treatments on the Resistant Starch Content and Physicochemical Properties of Lotus Rhizome Starches

Heat-moisture treatment (HMT) changed the morphology and the degree of molecular ordering in lotus rhizome (Nelumbo nucifera Gaertn.) starch granules slightly, leading to some detectable cavities or holes near hilum, weaker birefringence and granule agglomeration, accompanied with modified XRD pattern from C- to A-type starch and lower relative crystallinity, particularly for high moisture HMT modification. In contrast, annealing (ANN) showed less impact on granule morphology, XRD pattern and relative crystallinity. All hydrothermal treatment decreased the resistant starch (from about 27.7–35.4% to 2.7–20%), increased the damage starch (from about 0.5–1.6% to 2.4–23.6%) and modified the functional and pasting properties of lotus rhizome starch pronouncedly. An increase in gelatinization temperature but a decrease in transition enthalpy occurred after hydrothermal modification, particularly for hydrothermal modification involved with HMT. HMT-modified starch also showed higher pasting temperature, less pronounced peak viscosity, leading to less significant thixotropic behavior and retrogradation during pasting-gelation process. However, single ANN treatment imparts a higher tendency of retrogradation as compared to native starch. For dual hydrothermally modified samples, the functional properties generally resembled to the behavior of single HMT-modified samples, indicating the pre- or post-ANN modification had less impact on the properties HMT modified lotus rhizome starch.

Research on brightening modification of molecular sieves coated fly ash based on alkaline melting hydrothermal method

Improving the utilization rate of fly ash (FA) and realizing its resource utilization has always been a popular research topic in the application field of solid waste recycling. This paper aims to improve the basic brightness of fly ash (FA) before calcium carbonate coating, and realize the filling application of fly ash in medium and high-end paper. Taking advantage of the high brightness of molecular sieves (MS) (brightness ≥ 90 %ISO), the alkali melting hydrothermal synthesis (AM-HS) method was used to generate high brightness MS on the surface of fly ash. The results showed that the optimum conditions of alkali melting hydrothermal synthesis (AM-HS) modification were as follows: the mass ratio of sodium hydroxide to fly ash was 1:1, the time of hydrothermal modification was 6 h, the temperature of hydrothermal modification was 80 °C, and the brightness reached to 64.54 %ISO; The results of SEM, particle size analysis and ultrasonic vibration showed that the surface of fly ash is covered by MS and has strong binding effect.

In-Vitro Cytotoxicity Study: Cell Viability and Cell Morphology of Carbon Nanofibrous Scaffold/Hydroxyapatite Nanocomposites

Electrospun carbon nanofibers (CNFs), which were modified with hydroxyapatite, were fabricated to be used as a substrate for bone cell proliferation. The CNFs were derived from electrospun polyacrylonitrile (PAN) nanofibers after two steps of heat treatment: stabilization and carbonization. Carbon nanofibrous (CNF)/hydroxyapatite (HA) nanocomposites were prepared by two different methods; one of them being modification during electrospinning (CNF-8HA) and the second method being hydrothermal modification after carbonization (CNF-8HA; hydrothermally) to be used as a platform for bone tissue engineering. The biological investigations were performed using in-vitro cell counting, WST cell viability and cell morphology after three and seven days. L929 mouse fibroblasts were found to be more viable on the hydrothermally-modified CNF scaffolds than on the unmodified CNF scaffolds. The biological characterizations of the synthesized CNF/HA nanofibrous composites indicated higher capability of bone regeneration.