Larvicidal Activity of Geranylacetone Derivatives against Culex quinquefasciatus Larvae and Investigation of Environmental Toxicity and Non-Target Aquatic Species

A grindstone method based on Mannich condensation was used to synthesize geranylacetone derivatives (1a–1f). The method showed a high yield under milder reaction conditions. Analyses of the synthesized compounds were carried out by FTIR, 1H, 13C NMR, mass spectrometry, and elemental analysis. We synthesized and evaluated the larvicidal and ichthyotoxic activities of six compounds (1a–1f) in this study. Compound 1f (5,9-dimethyl-1-phenyl-3-(2-(3-phenylallylidene)hydrazinyl)deca-4,8-dien-1-one) was more active (LD50: 14.1 µg/mL) against the second instar larvae of Culex quinquefasciatus than geranylacetone (67.2 µg/mL), whereas the former caused 13.9% mortality at 100 µg/mL. Geranylacetone, in an antifeedant screening test, showed 53.1% against Oreochromis mossambicus within 24 h. The compound 1f showed high larvicidal activity against C. quinquefasciatus and was non-toxic to non-target aquatic species.

Synthesis and Biological Application of Isosteviol-Based 1,3-Aminoalcohols

Starting from isosteviol, a series of diterpenoid 1,3-aminoalcohol derivatives were stereoselectively synthesised. The acid-catalysed hydrolysis and rearrangement of natural stevioside gave isosteviol, which was transformed to the key intermediate methyl ester. In the next step, Mannich condensation of diterpenoid ketone, paraformaldehyde, and secondary amines resulted in the formation of 1,3-aminoketones with different stereoselectivities. During the Mannich condensation with dibenzylamine, an interesting N-benzyl → N-methyl substituent exchange was observed. Reduction of 1,3-aminoketones produced diastereoisomeric 1,3-aminoalcohols. Alternatively, aminoalcohols were obtained via stereoselective hydroxy-formylation, followed by oxime preparation, reduction, and finally, reductive alkylation of the obtained primary aminoalcohols. An alternative 1,3-aminoalcohol library was prepared by reductive amination of the intermediate 3-hydroxyaldehyde obtained from isosteviol in two-step synthesis. Cytotoxic activity of compounds against human tumour cell lines (A2780, SiHa, HeLa, MCF-7 and MDA-MB-231) was investigated. In our preliminary study, the 1,3-aminoalcohol function and N-benzyl substitution seemed to be essential for the reliable antiproliferative activity. To extend their application, a diterpenoid condensed with 2-phenylimino-1,3-thiazine and -1,3-oxazine was also attempted to prepare, but only formation of thioether intermediate was observed.

Synthesis of Novel Benzoxazines Containing Sulfur and Their Application in Rubber Compounds

This work reports the synthesis and successful use of novel benzoxazines as reinforcing resins in polyisoprene rubber compounds. For this purpose, three new dibenzoxazines containing one (4DTP-fa) or two heteroatoms of sulfur (3DPDS-fa and 4DPDS-fa) were synthesized following a Mannich condensation reaction. The structural features of each benzoxazine precursor were characterized by 1H and 13C nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) and Raman. The new precursors showed well suited reactivity as characterized by differential scanning calorimetry (DSC) and rheology and were incorporated in rubber compounds. After the mixing, the curing profiles, morphologies and mechanical properties of the materials were tested. These results show that the structural feature of each isomer was significantly affecting its behavior during the curing of the rubber compounds. Among the tested benzoxazines, 3DPDS-fa exhibited the best ability to reinforce the rubber compound even compared to common phenolic resin. These results prove the feasibility to reinforce rubber compounds with benzoxazine resins as a possible alternative to replace conventional phenolic resins. This paper provides the first guide to use benzoxazines as reinforcing resins for rubber applications, based on their curing kinetics.

Diastereodivergent synthesis of 4-oxocyclohexanecarbaldehydes by using the modularly designed organocatalysts upon switching on their iminium catalysis

The inhibited iminium catalysis of the MDOs was switched on by using trans-cinnamic acid and the activated MDOs were used for catalyzing the domino Mannich condensation/Michael/Michael reaction between ketones and α,β-unsaturated aldehydes.

Electronic Transitions, Inter- and Intra-Bond Interactions of an Azabicycle Single Crystal using DFT

2,4-Diphenyl-3-azabicyclo[3.3.1]nonan-9-one O-benzyloxime (ABN-OBn) was synthesized by modified Mannich condensation, purified by recrystallization and single crystals were grown by slow evaporation from ethanol. The empirical formula of the molecule is C27H28N2O as witnessed by HRMS, elemental analysis and the X-ray diffraction. The crystal belongs to triclinic system (α = 73.640, β = 78.505, γ = 87.078) with P-1 space group. The electronic excited states of ABN-OBn have been calculated using TD-DFT/B3LYP/6-31G(d,p) level of theory, in order to investigate the electronic transitions within the molecule. Frontier molecular orbitals (FMOs) of ABN-OBn have been studied to understand the electronic charge distributions and its band gap (5.0514 eV/245.45 nm). Density of states (DOS), partial density of states (PDOS) and total density of states (TDOS) with respect to functional groups were computed to investigate the electron densities of functional groups in the molecule. Natural bond orbital (NBO) has been performed to explore the intramolecular π-π* interaction of the compound.

Chiral Lewis acid-bonded picolinaldehyde enables enantiodivergent carbonyl catalysis in the Mannich/condensation reaction of glycine ester

The catalytic asymmetric Mannich/condensation of glycine ester with aldimines was achieved by merging chiral N,N′-dioxide/YbIII complex Lewis acid catalysis/carbonyl catalysis under mild condition.

Design of High-Performance Polybenzoxazines with Tunable Extended Networks Based on Resveratrol and Allyl Functional Benzoxazine

A novel resveratrol-based bio-benzoxazine monomer (RES-al) containing an allyl group has been synthesized using resveratrol, allylamine, and paraformaldehyde via Mannich condensation reaction, and its chemical structures have been characterized by FT-IR spectroscopy and NMR techniques. The polymerization behavior of this benzoxazine resin has been investigated using in situ FT-IR and differential scanning calorimeter (DSC) measurements, and the thermal-mechanical properties of its corresponding polybenzoxazines are evaluated by DMA and TGA. We show that by controlling the curing process of the oxazine ring, the C=C bond in resveratrol, and the allyl group in RES-al, the cross-linking network of the polybenzoxazine can be manipulated, giving rise to tunable performance of thermosets. As all curable functionalities in RES-al are polymerized, the resulted polybenzoxazine exhibits a good thermal stability with a Tg temperature of 313 °C, a Td5 value of 352 °C, and char yield of 53% at 800 °C under N2.

An Improved Synthesis of 3,6-Dihydro-as-indacene

This contribution describes an updated synthetic route to 3,6-dihydro-as-indacene along with full characterization of all inter­mediates. The title compound is prepared by Mannich condensation of 2-methylfuran with formaldehyde and dimethylamine hydrochloride, quaternization of the resulting amine with methyl iodide, and conversion into the ammonium hydroxide salt by treatment with silver oxide in water. Subsequent Hoffmann elimination and [6,6]-cycloaddition through pyrolysis produces a furanocyclophane, which after photooxidation, intramolecular cycloaddition, and dehydration with sodium carbonate affords 2,3,6,7-tetrahydro-1,8-dione-as-indacene. Reduction of this diketone gives a mixture of alcohols, which after dehydration under slightly basic or acidic conditions produces 3,6-dihydro-as-indacene. The structure is confirmed by X-ray diffraction, and all intermediates are characterized by means of 1H and 13C NMR spectroscopy.

Synthesis of ortho-methyltetrahydrophthalimide functional benzoxazine containing phthalonitrile group: Thermally activated polymerization behaviors and properties of its polymer

Two novel benzoxazine monomers, oHMTI-a and oHMTI-pn, have been obtained via the modified Mannich condensation from ortho-4-methyltetrahydrophalimide functional phenol, paraformaldehyde, and aniline/4-aminophthalonitrile, respectively. The chemical structures of both benzoxazine monomers have been studied by Fourier transform infrared (FT-IR) and 1H and 13C nuclear magnetic resonance (NMR) spectra. Their polymerization processes are investigated using in-situ FT-IR and different scanning calorimetry (DSC). Specifically, the phthalonitrile group in oHMTI-pn can react at a relatively lower temperature without adding any catalysts, which suggests the presence of the thermal synergistic polymerization effect in this benzoxazine monomer. In addition, the thermal and fire related properties of the resulting polybenzoxazines are evaluated by thermogravimetric analysis (TGA) and micro-scale combustion calorimetry (MCC). The polybenzoxazine derived from oHMTI-pn shows both high thermal stability and outstanding flame retardancy, with a T g of 350°C, a T d10 value of 417°C, a high char yield value of 65%, and a very low heat release capacity value of 35.2 J/(g·K).