Stability analysis of a nanopatterned bimaterial interface

In the article it is shown that the nanopatterned interface of bimaterial is unstable due to the diffusion atom flux along the interface. The main goal of the research is to analyze the conditions of interface stability. The authors developed a model coupling thermodynamics and solid mechanics frameworks. In accordance with the Gurtin—Murdoch theory of surface/interface elasticity, the interphase between two materials is considered as a negligibly thin layer with the elastic properties differing from those of the bulk materials. The growth rate of interface roughness depends on the variation of the chemical potential at the curved interface, which is a function of interface and bulk stresses. The stress distribution along the interface is found from the solution of plane elasticity problem taking into account plane strain conditions. Following this, the linearized evolution equation is derived, which describes the amplitude change of interface perturbation with time.

Coupled Extensional and Flexural Motions of a Two-Layer Plate With Interface Slip

The effect of imperfect interface on the coupled extensional and flexural motions in a two-layer elastic plate is investigated from views of theoretical analysis and numerical simulations. A set of full two-dimensional equations is obtained based on Mindlin plate theory and shear-slip model, which concerns the interface elasticity and tangential discontinuous displacements across the bonding imperfect interface. Some numerical examples are processed, including the propagation of straight-crested waves in an unbounded plate, the buckling of a finite plate, as well as the deflection of a finite plate under uniform load. It is revealed that the bending-evanescent wave in the composites with a perfect interface eventually cuts-on to a propagating shear-like wave with cutoff frequency when the two sublayers imperfectly bonded. The similar phenomenon has been verified once again for coupled face-shear and thickness-shear waves. It also has been pointed out that the interfacial parameter has a great influence on the performance of static buckling, in which the outcome can be reduced to classical buckling load of a simply supported plate when the interface is perfect.

Plane Deformations of an Inhomogeneity–Matrix System Incorporating a Compressible Liquid Inhomogeneity and Complete Gurtin–Murdoch Interface Model

We consider the plane deformations of an infinite elastic solid containing an arbitrarily shaped compressible liquid inhomogeneity in the presence of uniform remote in-plane loading. The effects of residual interface tension and interface elasticity are incorporated into the model of deformation via the complete Gurtin–Murdoch (G–M) interface model. The corresponding boundary value problem is reformulated and analyzed in the complex plane. A concise analytical solution describing the entire stress field in the surrounding solid is found in the particular case involving a circular inhomogeneity. Numerical examples are presented to illustrate the analytic solution when the uniform remote loading takes the form of a uniaxial compression. It is shown that using the simplified G–M interface model instead of the complete version may lead to significant errors in predicting the external loading-induced stress concentration in gel-like soft solids containing submicro- (or smaller) liquid inhomogeneities.