Copper Chloro-Complexes Concentrated Solutions: An Electrochemical Study

Basic studies on concentrated solutions are becoming more and more important due to the practical industrial and geological applications. The use in redox flow batteries is one of the most important applications of these solutions. Specifically, in this paper we investigated high-concentrated copper chloro-complexes solutions with different additives. The concentration of ligands and additives affects the physicochemical and electrochemical properties of 2 M solutions of Cu(I) and Cu(II). Solutions with calcium chloride and HCl as Cl− source were investigated with Cu:Cl ratios of 1:5 and 1:7, the 1:5 Cu:Cl ratio being the best performing. The substitution of calcium chloride with ammonium chloride increased the conductivity. However, while the effect on the positive electrode process was not very evident, the reversibility of the copper deposition–stripping process was greatly improved. Orthophosphoric acid could be a viable additive to decrease the complexation of calcium with chloride anions and to improve the stability of Cu(II) chloro-complexes. Absorption spectroscopy demonstrated that phosphate ions do not coordinate copper(II) but lead to a shift in the distribution of copper chloro-complexes toward more coordinated species. Electrochemically, the increased availability of chloride anions in solution stabilized the Cu(II)-rich solution and led to increased reversibility of the Cu(II)/Cu(I) redox process.

Durability of UHPFRC functionalised with nanoadditives due to synergies in the action of sulphate and chloride in cracked and uncracked states

This paper studies the durability of Ultra High Performance Fibre Reinforced Concrete (UHPFRC) with high Blast Furnace Slag content (BFS) and nanoadditives such as crystalline admixture (CA), alumina nanofibres (ANF) and cellulose nanocrystals (CNC), exposed to different aggressive environmental conditions: 1) three aggressive media: a) deionized water (dw), b) sulphate rich solution (ss) and c) simulated geothermal water (sgw) containing sulphate and chloride; 2) two water interaction conditions: a) static and b) dynamic (water impact); and 3) with and without the presence of cracks. Durability was analysed over 24 months, measuring several physical and chemical parameters of the system, recording changes in both the aggressive media and the concrete. All UHPFRC types demonstrate good durability, showing high resistance to expansion and deformation in the sulphate-rich media. A leaching process occurs in all water interaction systems, the dynamic interaction in sgw being the most aggressive. The interaction of sgw inside the crack favours the formation of solid phases such as calcium carbonates and ettringite, while the presence of nanoadditives affects the response of both the matrix and the formation of precipitates within the crack.

A comparison of three different methods of eliciting rapid activity-dependent synaptic plasticity at the Drosophila NMJ

The Drosophila NMJ is a system of choice for investigating the mechanisms underlying the structural and functional modifications evoked during activity-dependent synaptic plasticity. Because fly genetics allows considerable versatility, many strategies can be employed to elicit this activity. Here, we compare three different stimulation methods for eliciting activity-dependent changes in structure and function at the Drosophila NMJ. We find that the method using patterned stimulations driven by a K+-rich solution creates robust structural modifications but reduces muscle viability, as assessed by resting potential and membrane resistance. We argue that, using this method, electrophysiological studies that consider the frequency of events, rather than their amplitude, are the only reliable studies. We contrast these results with the expression of CsChrimson channels and red-light stimulation at the NMJ, as well as with the expression of TRPA channels and temperature stimulation. With both these methods we observed reliable modifications of synaptic structures and consistent changes in electrophysiological properties. Indeed, we observed a rapid appearance of immature boutons that lack postsynaptic differentiation, and a potentiation of spontaneous neurotransmission frequency. Surprisingly, a patterned application of temperature changes alone is sufficient to provoke both structural and functional plasticity. In this context, temperature-dependent TRPA channel activation induces additional structural plasticity but no further increase in the frequency of spontaneous neurotransmission, suggesting an uncoupling of these mechanisms.

In vitro assessment of elevated soil iron on germinability and germination characteristics of Sorghum bicolor (L.) Moench after chemo-priming

The commercial importance of Sorghum (Sorghum bicolor (L.) Moench) has attracted breeders to increase its seed yield using various breeding approach. Adverse soil factors however hampered progress made in crop development, especially micronutrient toxicity. Plant growth stimulators (PGS) have a significant role in enhancing growth parameters in Sorghum. In the present study, seeds were primed in 50, 150, and 250 ppm of each of gibberellic acid, indole acetic acid, and ascorbic acid respectively for 1 hr before sowing in Petri dishesmoistened with 10 ml of the iron-rich solution obtained as filtrate from a mix of distilled water and ferruginous soil (1:1 v/w). Results showed that although germination percentage in ferruginous medium was significantly reduced, there was enhancement in germination percentagewhen the seeds were primed in gibberellic acid (GA). Germinability in the iron-rich medium was 31.2 hrs; this was significantly reduced to 19.6 to 21.1hrs when these seeds were primed with growth stimulators.Although, shoot length was significantly reduced in plants exposed to ferruginous solutions, the root parameters were however enhanced. They were no significant changes in the total number of root branches regardless of ferrugenic status or use of growth stimulating agents. The utilization of growth stimulators as priming agents is called for to reduce stress impacts imposed by ferruginous soils during germination.

Extraction of Cu(II), Fe(III), Zn(II), and Mn(II) from Aqueous Solutions with Ionic Liquid R4NCy

The leaching of copper ores produces a rich solution with metal interferences. In this context, Fe(III), Zn(II), and Mn(II) are three metals contained in industrial copper-rich solutions in high quantities and eventually can be co-extracted with the copper. The purpose of the current study was to determine the feasibly of solvent extraction with the use of ionic liquid methyltrioctyl/decylammonium bis (2,4,4-trimethylpentyl)phosphinate (R4NCy) as an extractant of Cu(II) in the presence of Fe(III), Zn(II), and Mn(II). In general terms, the results showed a high single extraction efficiency of all the metals under study. In the case of Fe(III) and Zn(II), the extraction was close to 100%. On the contrary, the stripping efficiency was poor to Fe(III) and discrete to Zn(II), but very high to Cu(II) and Mn(II). Finally, the findings of this study suggest that the ionic liquid R4NCy is feasible for the pre-treatment of the copper solvent extraction process to remove metal impurities such as Fe(III) and Zn(II).

Preparation of Battery-Grade Lithium Carbonate with Lithium-Containing Desorption Solution

In this study, a process for preparing battery-grade lithium carbonate with lithium-rich solution obtained from the low lithium leaching solution of fly ash by adsorption method was proposed. A carbonization-decomposition process was carried out to remove impurities such as iron and aluminum. First, primary Li2CO3 was treated by CO2 to get the more soluble bicarbonates. The decomposition of LiHCO3 produced insoluble Li2CO3 at 90 °C And Li2CO3 was smashed by air stream pulverization. The final precipitation yielded a high purity (99.6%) and homogeneous Li2CO3. Some factors affecting production efficiency were investigated. The results showed that a liquid-solid ratio of 25:1, a carbonization temperature of 25 °C, an air velocity of 2 L/min, and a stirring speed of 400 rpm; a decomposition temperature of 90 °C and a stirring speed of 400 rpm, a molar ratio of EDTA to Ca 2:1; an air pressure of 0.3 MPa and hot water washing precipitate (L/S mass ratio 2:1) promoted ions removal.