Surgical Management of Juvenile Idiopathic Arthritis Related Dentofacial Deformities

Juvenile idiopathic arthritis (JIA) is the most common chronic rheumatologic disease of childhood and frequently affects the temporomandibular joints (TMJ). JIA TMJ management requires a team approach. Initially, TMJ JIA involvement is managed with systemic therapy or intra-articular medications to treat symptoms and limit the growth deformity, however may later require surgical intervention. This case series describes 4 patients with different presentations and treatments of juvenile idiopathic arthritis affecting the temporomandibular joints to illustrate a proposed treatment algorithm. This algorithm is not designed to be an absolute treatment regimen but a framework to help clarify the presenting problems and interventions that may be considered to treat JIA associated temporomandibular dysfunction and dentofacial deformity. This case series represents the variety of JIA temporomandibular joint disease and offers a graduated appropriate treatment algorithm.

Three-Dimensional Cephalometric Landmarking and Frankfort Horizontal Plane Construction: Reproducibility of Conventional and Novel Landmarks

In some dentofacial deformity patients, especially patients undergoing surgical orthodontic treatments, Computed Tomography (CT) scans are useful to assess complex asymmetry or to plan orthognathic surgery. This assessment would be made easier for orthodontists and surgeons with a three-dimensional (3D) cephalometric analysis, which would require the localization of landmarks and the construction of reference planes. The objectives of this study were to assess manual landmarking repeatability and reproducibility (R&R) of a set of 3D landmarks and to evaluate R&R of vertical cephalometric measurements using two Frankfort Horizontal (FH) planes as references for horizontal 3D imaging reorientation. Thirty-three landmarks, divided into “conventional”, “foraminal” and “dental”, were manually located twice by three experienced operators on 20 randomly-selected CT scans of orthognathic surgery patients. R&R confidence intervals (CI) of each landmark in the -x, -y and -z directions were computed according to the ISO 5725 standard. These landmarks were then used to construct 2 FH planes: a conventional FH plane (orbitale left, porion right and left) and a newly proposed FH plane (midinternal acoustic foramen, orbitale right and left). R&R of vertical cephalometric measurements were computed using these 2 FH planes as horizontal references for CT reorientation. Landmarks showing a 95% CI of repeatability and/or reproducibility > 2 mm were found exclusively in the “conventional” landmarks group. Vertical measurements showed excellent R&R (95% CI < 1 mm) with either FH plane as horizontal reference. However, the 2 FH planes were not found to be parallel (absolute angular difference of 2.41°, SD 1.27°). Overall, “dental” and “foraminal” landmarks were more reliable than the “conventional” landmarks. Despite the poor reliability of the landmarks orbitale and porion, the construction of the conventional FH plane provided a reliable horizontal reference for 3D craniofacial CT scan reorientation.

Advanced Digital 3D Technology in the Combined Surgery-First Orthognathic and Clear Aligner Orthodontic Therapy for Dentofacial Deformity Treatment

Orthognathic surgery and orthodontic treatment are required for patients with dentofacial deformities to obtain an ideal facial esthetic with good functioning. Recently, characterized by the surgery-first approach, an integrated orthodontic–surgical treatment has been introduced as an emerging solution to dentofacial deformity treatment. The surgery-first approach is regarded to have less treatment time and quicker enhancement of a facial profile than the conventional orthodontic–surgical treatment. Moreover, the recent advances in computing and imaging have allowed the adoption of 3-dimensional (3D) virtual planning protocols in orthognathic surgery as well as digital orthodontic treatment, which enables a paradigm shift when realizing virtual planning properly. These techniques then allow the surgeon and orthodontist to collaborate, plan, and simulate the dentofacial deformity treatment before performing the whole procedure. Along this line, in this research article, we present an integrated treatment method for the realization of an effective deformity treatment. Specifically, we implemented the integrated 3D technique by combining it with the surgery-first orthognathic approach (SFOA) as a novel treatment method for the patients. The outcomes from the combined treatments of the patients with dentofacial deformity, in practice, have demonstrated that our proposed 3D technique in orthognathics and orthodontics using clear aligner therapy (e.g., Invisalign) can enhance the satisfactory level of the patient since the start of treatment then improve their quality of life. As a result, the combined techniques realize the novel integrated treatment method using 3D technology with the use of 3D imaging and modeling as a promising development trend of dentistry, which fits into the context of Dentistry 4.0 as a key enabler to the concept of sustainable dentistry development.

Initial radiological signs of dentofacial deformity in juvenile idiopathic arthritis

Juvenile idiopathic arthritis (JIA) is the most common rheumatic disease in childhood and the temporomandibular joint (TMJ) is often involved. TMJ arthritis in growing individuals can cause deformation of facial skeleton (dentofacial deformity) and TMJ components (TMJ deformity). Treatment outcome hinges on early initiation of anti-inflammatory treatment and orthopaedic treatment with dental splints. The aim of the present study was to characterize the radiological signs of dentofacial deformity in patients with a JIA-induced need for orthopaedic treatment. We retrospectively studied 96 patients with JIA and 20 non-JIA controls to identify the initial radiological signs of JIA-induced dentofacial deformity leading to initiation of orthopaedic treatment. We found that initial radiological signs of dentofacial deformities were subtle and characterized by minor mandibular asymmetry and occlusal plane steepening. Radiological findings of TMJ deformity associated with initial dentofacial deformity were frequent and characterized by condylar articular surface flattening (OR 8.42), condylar subcortical cyst (OR 5.94), condylar surface erosion (OR 5.38) and condylar deviation in form (OR 25.39). Radiological signs of TMJ deformity were also documented in TMJs considered “healthy” during initial clinical and radiological examination. This study presents new knowledge of importance for early diagnosis of dentofacial deformity in JIA. Early diagnosis of dentofacial deformity is important as treatment outcome is greatly influenced by timely initiation.

RELATIONSHIP BETWEEN LOWER ANTERIOR CROWDING WITH FACIAL HEIGHT AND DEPTH IN BENGALEE POPULATION - À CEPHALOMETRIC STUDY

INTRODUCTION- A study of head and face presents a multidimensional problem which includes height, depth and width dimension and esthetics. The head and face is not spherical with qual radius in all directions. It is rather an irregular polygon and could not be measured by simple geometrical and mensurational methods. Malocclusion and dentofacial deformity arise through variations in normal developmental process and so must be evaluated against a perspective of normal development of the craniofacial morphology like facial height and depth. AIMS AND OBJECTIVES- The basic aim of this study was to nd the co-relation between lower anterior crowding with facial height and depth in Bengalee population by the lateral cephalometrics. MATERIALS AND METHODS- The present study was conducted on thirty young Bengalee subjects comprising of males and females of fourteen to twenty years of age. Fifteen subjects were selected with noncrowded normal class - 1 cases and fteen with crowded mandibular incisors. The purpose of this study was to evaluate the relationship between facial height, facial depth and lower anterior crowding among the two above mentioned groups. RESULT AND CONCLUSION- Both linear dimensions and angular values were compared between the two sample groups. The measurements were taken from lateral cephalograms. The parameters used were Anterior facial height, Posterior facial height, mandibular length, Facial depth (SN length), 'e' and 'f' values (linear dimensions). The angular values compared were SN-MP angle, SN-Occlusal plane angle and SNEndognathion angle. For each measurement the mean, standard deviation and standard error were established. Correlation were made by comparing the different parameters between the crowded and non-crowded sample group.

Hemifacial Microsomia (HFM) and Treacher Collins Syndrome

Hemifacial microsomia and Treacher Collins syndrome are two entities which arise as a consequence of abnormal development of first and second branchial arches in utero. As a result, these dentofacial deformities present with abnormal facies especially the maxilla and mandible. They may also occur as part of other syndromes and may involve other structures of the body. In this chapter, we have discussed the etiology, clinical features, radiological assessment and treatment planning of such cases. Special emphasis should be made on early diagnosis, challenges of airway management and feeding and parental counselling. Since the two deformities are largely considered to be non-progressive, early distraction plays an important role in correction of the dentofacial deformity in these patients.

Surgical-orthodontic retreatment of a severe skeletal Class III malocclusion following an orthodontic camouflage

ABSTRACT Introduction: Class III malocclusions are some of the most difficult occlusal anomalies to be treated. Some patients with this condition may require orthognathic surgery, while others may be treated with dental camouflage. Proper patient assessment and selection remains critical in order to achieve favorable results. Objectives: This report outlines the case of an 18-year-old male who sought retreatment for a severe skeletal Class III dentofacial deformity after undergoing orthodontic camouflage treatment involving mandibular arch extractions. A treatment plan comprising dental decompensation and orthognathic surgery was implemented in order to achieve optimal facial and occlusal results. Results: After 28 months of treatment, skeletal and dental correction was achieved and facial features were significantly improved. The orthognathic surgery required a 20-mm sagittal maxillomandibular skeletal correction, combined with a 4-mm correction of the midlines and a 2-mm impaction of the maxilla. Conclusion: Dental compensation may be a risky treatment alternative for severe dentoskeletal discrepancies. In these patients, orthodontics combined with orthognathic surgery is the recommended treatment option.