Building Ceramics of the Ancient Settlement of Akchakhan-Kala

The Akshakhan-kala is located on the right bank of the Amu Darya, in the Biruni district of the Republic of Karakalpakstan. Over the years of archaeological study of the site, a large ceramic material was collected, dating back to the 3rd cent. BCE - 5th cent. AC. In the archaeological collection of the site, a group of finds is distinguished, attributed to the category of building ceramics. The article is devoted to the analysis of this collection and an attempt to determine the field of application of certain types of building ceramics. Among the building ceramics of the Akshakhan settlement stand out spillway pipes and ceramic tiles. The use of fragments of ceramic vessels in the construction was also recorded. The obtained analysis results suggest that in ancient Khwarezm, ceramic building materials were used to solve such problems as protecting structures from atmospheric precipitation, improving settlements and increasing the strength of adobe structures.

Influence of Leaning Materials on the Quality of Building Ceramics

Clay of the deposit Liepa is used for the production of ceramic building and finishing bricks in the factory “Lode” in Latvia. In the present work different types of these clays were investigated and “quartz effect” was determined using quartz sand as a leaning material. The substitution of quartz sand with milled E-glass fibre from Valmiera Glass was investigated and the changes in the magnitude of the quartz inversion effect were analysed. Thermal expansion was the main method for the determination of possible formation of cracks during technological process. Powder of milled glass fibre in amount of 5–10 % affects such properties as water uptake, porosity and apparent density and provides the required material properties at a lower firing temperature.

Innovative Technologies for the Production of Ceramic Building Materials from Waste of Natural (Exogenous) Processes

The main material for the modern construction business is cement/concrete, the production of which is associated with high energy and material costs and, most importantly, high CO2 emissions into the atmosphere. Based on this, the development of technologies for new energy-efficient building materials - substitutes for Portland cement is of great importance. One of the ways to solve this problem could be the wider use of ceramic building materials, the production of which requires less energy and is not associated with high CO2 emissions compared to the production of Portland cement. The subject of this article is the development of innovative technologies for the production of ceramic building materials in Georgia (ordinary building bricks and clinker bricks) by using unconventional raw material - clay shale aluvium which is a waste of natural (exogenous) processes. As the main component of the ceramic mass, we used clay shale aluvium from the Duruji river bed near the town of Kvareli, which made it possible to reduce the firing temperature and improve the quality of the finished product. X-ray phase, petrographic and electronic microscopic studies have shown that ceramic products, both building and clinker bricks, made with the use of Kvareli shale, under the same firing conditions, have been obtained with a denser structure ensuring higher physical and mechanical features as compared to clay Metekhi, which is currently used by the brick factory in Georgia. The use of shale accumulated in the region of Kvareli in various areas of the economy (including production of ceramic building materials) will make it possible to clear the adjacent territory from risky deposits of natural alluvium, which threatens to flood the city and provide companies engaged in production of ceramic building materials with low-cost and environmentally friendly raw materials.

Late Mesolithic, Middle Bronze Age and Late Iron Age/romano-british Activity at Crowdhill, Fair Oak, Eastleigh

Nine areas, totalling 1.3ha were excavated after evaluation and desk-based assessment at land near Crowdhill, Eastleigh (NGR 448830 119560). Features were densest in Areas 1 and 2, with evidence dating from the Palaeolithic to the early Romano- British period. Three pieces of flint from a Long Blade assemblage were recovered, probably from a small localised scatter. A core tool rough-out, probably for a Mesolithic tranchet axe, was found in a pit with charred hazelnut shells from which two radiocarbon dates were obtained. Two cremation graves, each containing urned deposits, and an urned 'cenotaph' provide information about the inhabitants of the area although contemporary settlement evidence is lacking. By the Late Bronze Age there was evidence for settlement in the form of a pit containing flint-tempered pottery, worked flint and burnt flint along with charred cereal grain. A radiocarbon date was obtained on charred cereal grain from this pit confirming its age. There was sparse evidence for occupation in the late prehistoric period but by the early Romano-British period a number of ditches and intercutting pits as well as artefactual material (pottery, ceramic building material, fired clay and saddle quern fragments) indicates the presence of a small rural settlement in the vicinity of the site.

The Architectural Terracotta Marks of Bracara Augusta (Braga, Portugal): A First Typology Classification

Architectural Terracotta (ATC) is one of the most common materials in excavations from the Roman period. These ceramic building materials are an essential component of construction. Some of these pieces show potter´s marks, of different categories, that allow access to the production world of these materials. This investigation is a first typological classification of the 1216 marks from ATC materials, collected from 41 archaeological sites in Bracara Augusta (Braga, Portugal). Most of the marks were collected from the domus of Carvalheiras, one of the most emblematic archaeological sites of the city, currently under a musealization process. With this work it was possible to correlate the studied marks with specific terracotta types (shapes), context distribution and associated chronologies. The results suggested an organized and dynamic production, and an open-market, supported by numerous officinae, certainly of different sizes. Some of them were located near the housing area and reveal the presence of a large number of workers, including women and children. Further approaches on mineralogical, chemical and technological characterization of ATC, linked with stratigraphy, are under development.

Building Britannia: Pre-Flavian Private and Public Construction across Southern Britain

ABSTRACT Excavation of the Roman tilery at Little London, Pamber, Hampshire, has prompted a reassessment of the dating of relief-patterned tile, assigning the bulk of production to the Claudio-Neronian period rather than the late first to mid-/late second century. This material has been privileged for retention in excavation archives but can now be seen as a proxy for the manufacture of a much wider range of ceramic building material, typically discarded on site, which, in the case of products from Little London and pre-Flavian Minety (Wiltshire), travelled distances of up to 100 km. Redating implies more extensive public and private building in town and country south and east of the Fosse Way before the Flavian period than has previously been envisaged. While private building included the construction of bath-houses, heated rooms and the provision of roofing materials, public building, we suggest, provided tabernas et praetoria along the principal roads of the province. In the private sphere such building provides a possible context for Dio Cassius’ mention of the recall and confiscation of large loans made to Britons before the Boudican rebellion. Finally, consideration of fabric needs to be added to the criteria for retaining ceramic building material in excavation archives.

The Influence of External Environmental Conditions on Properties of Ceramic Building Materials with Waste Material Additives

In this paper, we analyze the state of conservation of ceramic building materials (clay masonry units) containing a large share of waste materials in the form of ash and slag from coal combustion and sawdust from wood processing, operated for several decades in facing walls of religious buildings, in external environment conditions. For the purpose of this analysis, comparative tests were carried out on the samples of ceramic materials cut out from facing walls and samples extracted from the same ceramic materials; they were stored in laboratory conditions for the entire time. The following were investigated: initial water absorption, capillary rise, and porosity structure determined with mercury intrusion porosimetry (MIP). The research has shown, among other things, that the ceramic materials exploited in the external environment are characterized by an almost twofold increase in the initial rate of water absorption and by a different size of dominant pores and a pore size distribution in comparison with ceramic materials stored in laboratory conditions. The results, obtained for ceramic building materials (clay masonry units) containing the above-mentioned waste materials in their composition, constitute a novelty. They fill a gap in the literature by establishing how decades-long operation in natural conditions affected the capillary properties and the porosity structure of the ceramics under investigation. Based on the obtained research results, conclusions of cognitive and practical significance have been formulated that relate to the possibility of the exploitation of facing walls made of investigated ceramic materials.