Solid-State Hydrolysis (SSH) Improves the Nutritional Value of Plant Ingredients in the Diet of Mugil cephalus

The possibility of improving the nutritional quality of plant byproducts (brewers’ spent grain and rice bran) through an enzyme treatment was tested in a formulated feed for grey mullet (Mugil cephalus). The enzyme treatment was carried out by Solid-State Hydrolysis (SSH) using a commercial preparation including carbohydrases and phytase. A feed prepared without the treatment and a commercial feed for carp were used as controls. In a preliminary short-term trial carried out at laboratory facilities, fish receiving the enzyme-treated feed showed significant improvement in both FCR and SGR when compared to those obtained with the untreated diet, although both experimental diets presented worse values than those obtained with the commercial feed. Different metabolic indicators including higher values of muscle glycogen and plasmatic triglycerides supported the positive effect of the enzyme treatment on the nutritional condition of the fish over those fed on the diet containing non-treated ingredients. Results of growth and feed efficiency that were obtained in a second long-term trial developed for 148 days under real production conditions evidenced the equivalence among the experimental and commercial diets and confirmed that enzyme pretreatment of plant ingredients by SSH may be a useful procedure to improve the nutritive value of high fiber plant byproducts when included in practical diets for this species and others with similar nutritional features.

Histology and μCT reveal the unique evolution and development of multiple tooth rows in the synapsid Endothiodon

Several amniote lineages independently evolved multiple rows of marginal teeth in response to the challenge of processing high fiber plant matter. Multiple tooth rows develop via alterations to tooth replacement in captorhinid reptiles and ornithischian dinosaurs, but the specific changes that produce this morphology differ, reflecting differences in their modes of tooth attachment. To further understand the mechanisms by which multiple tooth rows can develop, we examined this feature in Endothiodon bathystoma, a member of the only synapsid clade (Anomodontia) to evolve a multi-rowed marginal dentition. We histologically sampled Endothiodon mandibles with and without multiple tooth rows as well as single-rowed maxillae. We also segmented functional and replacement teeth in µ-CT scanned mandibles and maxillae of Endothiodon and several other anomodonts with ‘postcanine’ teeth to characterize tooth replacement in the clade. All anomodonts in our sample displayed a space around the tooth roots for a soft tissue attachment between tooth and jaw in life. Trails of alveolar bone indicate varying degrees of labial migration of teeth through ontogeny, often altering the spatial relationships of functional and replacement teeth in the upper and lower jaws. We present a model of multiple tooth row development in E. bathystoma in which labial migration of functional teeth was extensive enough to prevent resorption and replacement by newer generations of teeth. This model represents another mechanism by which multiple tooth rows evolved in amniotes. The multiple tooth rows of E. bathystoma may have provided more extensive contact between the teeth and a triturating surface on the palatine during chewing.

Distribution Characteristics of Per- and Polyfluoroalkyl Substances (PFASs) in Human Urines of Acrylic Fiber Plant and Chemical Plant

Per- and polyfluoroalkyl substances (PFASs) are persistent and bio-accumulative substances that have many adverse effects on human bodies. This study investigated the PFASs distribution characteristics in urine samples of workers from an acrylic fiber plant and a chemical plant. It was found that perfluorobutanoic acid (PFBA) was the predominant PFASs both in urine samples from the chemical plant (detection frequency: 86.52%; median value: 39.01 ng/mL) and the acrylic fiber plant (detection frequency: 88.16%; median value: 44.36 ng/mL). Meanwhile, perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) were detected with very low frequencies and low concentrations. Furthermore, the results showed that PFASs levels in urine samples of workers from different units of the plants were quite different. PFASs concentrations of urine samples in males were higher than those in females, especially for PFBA, PFHxA, and PFDoA. The age had limited effects on the PFASs distribution in urine samples in this study, as short-chain PFASs were the dominant compounds. The correlations between PFASs concentrations in urine and gender/ages of workers were finally analyzed by Person correlation. The overall results may indicate that short-chain PFASs (such as: PFBA and PFBS) were becoming dominant for human exposure, especially occupational workers.

Sintesis Nitroselulosa Dari Serat Rami (Boechmerianivea) Menggunakan Trietilamin

Nitrocellulose is cellulose that is titrated into an ester polymer which can be used as a major component in several types of ammunition and explosives and other materials. Hemp (Boehmeria nivea) is a type of fiber plant that is rich in cellulose and thrives in Indonesia. Until now, the need for nitrocellulose in Indonesia is still imported, even though there is a lot of potential for cellulose that can be exploited, one of which is by synthesizing nitrocellulose from the hemp plant. One of the many uses of nitrocellulose derivatives, one of which is propellant. The propellant is the fuel or power source of a rocket engine. Nitrocellulose that can be used for propellants is nitrocellulose with levels between 11-13.3% nitrogen. This study aims to produce nitrocellulose in levels that meet the standards for making propellants. The study was carried out with a cellulose activation procedure using 20% ​​sodium hydroxide and 1 ml of triethylamine per gram of cellulose. Cellulose nitration was carried out using sulfuric acid and nitric acid with the composition of A (1: 1), B (2: 1) and C (3: 1) which were refluxed for 3 hours. Nitrogen determination was carried out using the Kjeldahl method. The results showed that from 3 samples A, B, and C, nitrogen levels were obtained respectively 12.62%, 13.23%, and 12.97%. This shows that the nitrocellulose from the hemp plant (Boehmeria nivea) can be used for propellants. Keywords: Hemp, nitrocellulose, nitration, triethylamine, propellant

Ramie-degumming methodologies: A short review

Ramie ( Boehmeria nivea L.), a perennial herb, is an important bast fiber plant. Its fiber with the advantages of attractive luster, high tenacity, enhanced strength, and good microbial resistivity is well known as the queen of natural fibers. The abundant cellulose fibers in ramie raw materials are stuck tightly by gums consisting of pectic substances, hemicelluloses, and little lignin. The gum should remove from the ramie raw material through degumming process to separate fibers, unveil unique fiber properties, and improve fiber-spinning ability to fulfill textile requirements. Low degumming efficiency and high environmental pollution are the major problems hindering the utilization of ramie fibers. Ramie degumming involves the degradation of pectin and hemicelluloses, which requires chemical, physical, biological treatment, or a combination of several treatments. No stereotyped parameters of the given degumming method have been yet established for the extraction of textile-grade ramie fibers. This review evaluated integrated methodology involving chemical, physical, biological and biochemical methods to degum raw ramie and obtain textile-grade refined fibers.