Structural Characterization and Physical Properties of Double Perovskite La2FeReO6+δ Powders

The structural, optical, dielectric, and magnetic properties of double perovskite La2FeReO6+δ (LFRO) powders synthesized by solid-state reaction method under CO reduced atmosphere are reported on in this paper. Reitveld refinements on the XRD data revealed that the LFRO powders crystallized in an orthogonal structure (Pbnm space group) with column-like morphology. The molar ratios of La, Fe, and Re elements were close to 2:1:1. XPS spectra verified the mixed chemical states of Fe and Re ions, and two oxygen species in the LFRO powders. The LFRO ceramics exhibited a relaxor-like dielectric behavior, and the associated activation energy was 0.05 eV. Possible origins of the dielectric relaxation behavior are discussed based on the hopping of electrons among the hetero-valence ions at B-site, oxygen ion hopping through the vacant oxygen sites, and the jumping of electrons trapped in the shallower level created by oxygen vacancy. The LFRO powders display room temperature ferromagnetism with Curie temperature of 746 K. A Griffiths-like phase was observed in the LFRO powders with a Griffiths temperature of 758 K. The direct optical band gap of the LFRO powders was 2.30 eV, deduced from their absorption spectra, as confirmed by their green photoluminescence spectra with a strong peak around 556 nm.

Anisometric Ln(III) Complexes with Efficient Near-IR Luminescence

Recent studies in development of near-infrared luminophores focus on overcoming their disadvantages such as low quantum efficiency, limited emission power, and broad emission spectra. Rare earth (RE) elements are promising compounds in this respect as they offer a unique set of optical properties that provide narrow emission spectra and large Stokes shifts. This work reports the results of synthesis and characterization of new anisometric complexes of lanthanide(III) tris(b-diketonates) and 1,10-phenanthroline. These complexes possess light emitting-properties in the near-infrared range. Due to their structural features, these complexes allow production of homogeneous films by spin coating. These films are transparent in the visible and near-infrared ranges (transmission up to 99%). This paper demonstrates advantages of Yb(III), Er(III), and Nd(III) complexes as potential components of highly efficient light-transforming NIR coatings.

Er3+Incorporated Transparent Ternary Nanocomposite as Active Core Material in Polymer Optical Preform with Improved Photo-emission Performance

Background: A polymer as a host in the optical waveguide has many advantages and, when doped with rare-earth (RE) elements, offers an efficient connection, compared to its glass-based counterparts as an amplifier. However, a polymer matrix causes the concentration quenching effect of REs in the polymer matrix, making the fabrication of RE-doped polymer waveguides more complicated as compared to the fabrication of glass-based complements. Moreover, controlling scattering loss at the particle-polymer interface for maintaining the optical clarity of the composite is also a great challenge. Objective: The main aim of the present study was to optimize the synthesis of Er2O3grafted Polymethylmethacrylate (PMMA)-Polystyrene (PS) composite based transparent ternary nanocomposite and its characterization to implement them as a potential material for active core in Polymer Optical Preform (POP). Methods: Nano Erbium Oxide (Er2O3) was successfully synthesized by the wet-chemical method and encapsulated by a polymerizable surfactant, i.e., 3-Methacyloxypropyltrimethoxy silane (MPS). The encapsulated nanoparticles were further subjected to grafting with PMMA using in-situ polymerization of methyl methacrylate (MMA) followed by blending with PS via solvent mixing technique. Results: The optical transparency of the ternary composite was achieved by fine-tuning the diameter (15-20 nm) of the PMMA coated Er2O3. The crystallinity present in Er2O3 was significantly reduced after PMMA coating. The comparatively higher refractive index obtained at 589 nm wavelength for the synthesized material indicated its usability as active core material in the presence of a commercial acrylate cladding tube. A photoluminescence (Pl) study indicated that the technique might be used for a higher level of Er3+doping in polymer matrix without sacrificing its transparency. Conclusion: The obtained results indicated that the sample synthesized with the adopted technique gives better Pl intensity compared to the other methods of Er3+ incorporation in polymer optical preform (POP).

Preliminary Studies on Rare Elements Addition and Effect on Oxidation Behaviour of Pack Cementation Coatings Deposited on Variety of Steels at High Temperature

The aim of the paper was to investigate the air oxidation behaviour of pack aluminised steels exposed at 650 °C for 1000 h in static natural air atmosphere. The pack coatings were doped by rare elements such as gadolinium (Gd), cerium oxide (CeO2), and lanthanum (La) in order to enhance the corrosion resistance and plasticity of the deposited layers. In this work, the following steels were used: 16M, T91, VM12, Super 304H, and finally SANICRO25. The results indicated a much higher corrosion resistance in the coated 16M, T91, and VM12 steels; the steels with a higher Cr content than 16 wt % Cr indicated a better behaviour in the uncoated state than in the coated state. However, the observed difference in mass gain between the uncoated and the coated austenitic steels was not enormous. Furthermore, the addition of RE elements to the coating showed some effect in terms of coating thicknesses and differences in the layer structures. The materials prior to testing and after the exposure were investigated using XRD, the SEM X-ray maps with an EDS instrument were used for particular samples to evaluate the phase identifications, element concentrations, microstructure, and chemical composition.

Study on the Strengthening Mechanism of Rare Earth Ce in Magnesium Alloys, Based on First-Principle Calculations and Electronegativity Theory

Since the commercial applications of rare earth magnesium alloys are increasing gradually, there are considerable advantages to developing lower cost and higher performance magnesium alloys with high abundance rare earth (RE) elements. However, the alloying order of a matrix magnesium alloy is completely changed with the addition of RE elements. Therefore, further study of the strengthening mechanism of Ce element in magnesium alloys is required. In this work, the thermodynamic stability of the possible second phases in a Mg-Al-Mn-Ce multicomponent magnesium alloy were analyzed, based on first-principle calculations, and the precipitation sequence of the key RE phases was deduced as a consequence. Combined with Scanning Electron Microscope (SEM), X-ray Diffractometer (XRD), Energy Dispersive Spectrometer (EDS), and other experimental methods, it was investigated whether the preferentially precipitated second phases were the nucleation core of primary α-Mg. The complex alloying problem and strengthening mechanism in a multi-elemental magnesium alloy system were simplified with the aid of electronegativity theory. The results showed that the preferentially precipitated Al11Ce3 and Al10Ce2Mn7 phases could not be the nucleation core of primary α-Mg, and the grain refinement mechanism was such that the second phases at the grain boundary prevented the growth of magnesium grains. Moreover, the tensile test results showed that the reinforced structure, in which the Al-Ce phase was mixed with Mg-Al phase, was beneficial for improving the mechanical properties of magnesium alloys, at both ambient temperature and high temperature.

3D printed and spiral lithographically patterned erbium-doped polymer micro-waveguide amplifiers

Infrared (IR)-emitting RE doped materials have been extensively used to fabricate active components of integrated optical devices in various fields, such as fiber amplifiers, telecommunications, optoelectronics, and waveguides. Among various RE elements, trivalent erbium ions (Er 3+) are of great interest since their emissive behavior span the low loss telecommunication window of 1300–1650 nm. In this paper, we report two types of polymeric waveguide amplifiers. 8 cm long, lithographically patterned spiral waveguides provide 8 dB of gain using a 980 nm pump power of 95 mW. Gain is observed from 1530 to 1590 nm. We further report the first demonstration of polymeric waveguide amplifiers fabricated using 3D printing methods based on two-photon lithography, paving the way for rapid prototyping of active 3D printed devices and active photonic devices which may transcend planar limitations.

Electrochemical Deposition of U and RE Elements Using the Stirred Liquid Cadmium Cathode in LiCl-KCl Molten Salts

This study was conducted in an attempt to understand the effect of a stirred liquid cadmium cathode (LCC) on the electrodeposition of U and U/RE on Cd. For this purpose, a series of electrowinning tests were performed using an LCC equipped with a Cd stirrer. Initially, three runs of the U electrodeposition tests were conducted using LiCl-KCl-UCl3 at 500°C under a constant current. From the results obtained from the initial three runs, it was found that the maximum deposited amount of U was 7.4 wt% U/Cd. U dendrite formation on the LCC crucible was not observed across each of the three runs. Three additional runs were conducted using LiCl-KCl-UCl3-RECl3 to determine the extent of U/RE electrodeposition. The maximum number of moles of U + RE metals deposited was 0.07, a value estimated to be 2.14 times higher than the solubility limits exhibited by these metals in Cd. The results of this study show that the use of a Cd stirrer significantly improves the extent of U deposition.

The electronic origins of the “rare earth” texture effect in magnesium alloys

Although magnesium alloys are lightweight, recyclable and relatively cheap, they suffer from poor ductility. This can be improved by the addition of rare earth (RE) elements, and this is now a well-established criterion for wrought alloy design. It is notable that this behavior is largely restricted to the lanthanides, but no hypothesis is yet available to explain why other elements do not have the same effect. To answer this question, ab initio simulations of crystallographically complex boundaries have been undertaken to examine the electronic origin of the RE effect. While the electronic structure provided strong bonding between the RE elements and their Mg surroundings, local disruption in atomic arrangement at the grain boundaries was found to modify this effect. This work shows quantifiable changes in electronic structure of solutes resulting from grain boundary crystallography, and is suggested to be a contributing factor to the RE texture effect.

Effect of RE Elements Addition on Corrosion Behavior of Mg-Zn-Ca Amorphous Alloys for Biomedical Applications

The effects of rare earth (RE) elements (La, Y) addition on thermal stability and corrosion behavior of Mg68Zn28Ca4 amorphous alloys were investigated in this paper. The investigated Mg-Zn-Ca-RE amorphous alloys exhibit good thermal stability and enhanced corrosion resistance. The enhanced corrosion resistance of the RE-containing amorphous alloys is owing to the enrichment of the Zn and RE elements in the oxide layer. The corrosion resistance is further improved with the increasing of RE content.