scholarly journals Highly Transparent and Conductive Indium‐Free Vanadates Crystallized at Reduced Temperature on Glass Using a 2D Transparent Nanosheet Seed Layer

2021 ◽  
pp. 2108047
Author(s):  
Alexis Boileau ◽  
Simon Hurand ◽  
Florent Baudouin ◽  
Ulrike Lüders ◽  
Marie Dallocchio ◽  
...  
1996 ◽  
Vol 451 ◽  
Author(s):  
R. Amster ◽  
B. Johnson ◽  
L. S. Vanasupa
Keyword(s):  

ABSTRACTWe studied the nucleation of Cu deposited by an electroless bath. A Pd seed layer was sputtered onto a (100) Si substrate and analyzed with GIX, STM, and AFM. The seed layer was then placed in varying ED-Cu bath conditions and also analyzed using GIX, STM, and AFM. GIX analysis results show a (111) texture for the Pd seed layer as well as the ED-Cu layer. The seed layer's influence on the deposited Cu grain's texture was found to be inconclusive.


Author(s):  
Wen-Fei Hsieh ◽  
Shih-Hsiang Tseng ◽  
Bo Min She

Abstract In this study, an FIB-based cross section TEM sample preparation procedure for targeted via with barrier/Cu seed layer is introduced. The dual beam FIB with electron beam for target location and Ga ion beam for sample milling is the main tool for the targeted via with barrier/Cu seed layer inspection. With the help of the FIB operation and epoxy layer protection, ta cross section TEM sample at a targeted via with barrier/Cu seed layer could be made. Subsequent TEM inspection is used to verify the quality of the structure. This approach was used in the Cu process integration performance monitor. All these TEM results are very helpful in process development and yield improvement.


1980 ◽  
Vol 45 (6) ◽  
pp. 1669-1676 ◽  
Author(s):  
Pavel Kubáček

The first step of electrochemical oxidation of 2-phenyl- and 2-(4-tolyl)-1,3,4,7-tetramethylisoindoles in anhydrous acetonitrile produces relatively stable cationradicals which have been studied by means of EPR spectroscopy using the method of internal electrochemical generation of radicals under reduced temperature. The same electrochemical behaviour of the both studied derivatives and identical EPR spectra of their cationradicals can be explained within the Huckel MO method. The largest contribution to the magnitude of splitting constant of nitrogen nucleus is due to π-σ-spin polarization of C-N bonds caused by high spin abundance of pz-AO of carbon atoms. Half-life of decomposition of the studied cationradicals is 4 min at -30°C.


2011 ◽  
Vol 311-313 ◽  
pp. 2309-2314 ◽  
Author(s):  
Wen Xia Zhu ◽  
Zhe Lü ◽  
Le Xin Wang ◽  
Xiao Yan Guan ◽  
Xin Yan Zhang

°Abstract. In order to develop new cathodes for reduced temperature SOFCs, Ba0.5Sr0.5Co0.8Fe0.2O3-δ-Ag composite cathode was investigated in intermediate-temperature Solid Oxide Fuel Cells (IT-SOFCs). The XRD results suggested that no chemical reactions between BSCF and Ag in the composite cathode were found. The resistance measurements showed that the addition of Ag into BSCF improved electrical conductivity of pure BSCF, and the improved conductivity resulted in attractive cathode performance. In addition, electrochemical impedance spectra exhibited the better performance of BSCF-Ag composite cathodes than pure BSCF, e.g., the polarization resistance value of BSCF-Ag was only 0.36Ω cm2 at 650°C, which was nearly 80% lower than that of BSCF electrode. Polarization curves showed the overpotential decreased with the addition of Ag. The current density value of BSCF-Ag was 0.88Acm-2 under –120mV, about five times of that BSCF measured at 650°C. As a summary, compared to a pure BSCF cathode, it was found that adding Ag in the cathode enhanced the BSCF performance significantly.


2000 ◽  
Vol 78 (5) ◽  
pp. 590-597 ◽  
Author(s):  
Umarani Rajalingam ◽  
Philip AW Dean ◽  
Hilary A Jenkins

The complex salts CdL4(O3SCF3)2 (L = 2(1H)-pyridinethione (Py2SH), 4(1H)-pyridinethione (Py4SH), or 2(1H)-quinolinethione (Q2SH)) have been synthesized by the stoichiometric reaction of Cd(O3SCF3)2 and the appropriate thione. Both ambient-temperature 13C and reduced-temperature 111Cd NMR of CdL4(O3SCF3)2 in solution are consistent with L being bound through sulfur. Reduced-temperature NMR (31P, 77Se, 111Cd, as appropriate) of mixtures of CdL4(O3SCF3)2 and Cd(EPCy3)4(O3SCF3)2 (E = Se, Cy = c-C6H11) and of Cd(EPCy3)4(O3SCF3)2 (E = S, Se) and L in solution provides evidence for various [CdLn(EPCy3)4-n]2+. Similarly, reduced-temperature metal NMR of [CdL4]2+ and [CdL'4]2+ (L, L' = Py2SH, Py4SH, Q2SH; L not equal L') in solution shows the formation of [CdLnL'4-n]2+. Thus it has been demonstrated that at reduced temperature [CdL4]2+ is intact in solution and exchange of L is slow on the timescale of the metal chemical shift differences. From the NMR studies of Cd(EPCy3)4(O3SCF3)2 (E = S, Se):L mixtures, the binding preferences are found to be L > EPCy3 in solution. Similarly, from the reduced temperature metal NMR spectra of mixtures where L and L' compete for Cd(II) in solution, the binding preferences are Py4SH > Py2SH > Q2SH. The structure of Cd(Py2SH)4(NO3)2 (4) has been determined by single crystal X-ray analysis. Colorless crystals of 4 are tetragonal, I4(1)/acd with 8 molecules per unit cell of dimensions a = 18.660(3), c = 15.215(3) Å. The structure is comprised of recognizable NO3- anions and [Cd(Py2SH)4]2+ cations. In the cations, which have S4 symmetry, the ligands are S-bound. A network of NH···O hydrogen bonds links the cations and anions.Key words: aromatic heterocyclic thiones, cadmium complexes, phosphine chalcogenides, 111Cd, 31P, 77Se NMR, X-ray crystallography.


2021 ◽  
Vol 52 (S1) ◽  
pp. 170-174
Author(s):  
Hennrik Schmidt ◽  
Harald Koestenbauer ◽  
Dominik Lorenz ◽  
Christian Linke ◽  
Enrico Franzke ◽  
...  

2021 ◽  
Vol 27 ◽  
pp. 100819
Author(s):  
Zhiqiang Lai ◽  
Tao Zhao ◽  
Pengli Zhu ◽  
Jing Xiang ◽  
Dan Liu ◽  
...  

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1433
Author(s):  
Taoufik Slimani Tlemcani ◽  
Camille Justeau ◽  
Kevin Nadaud ◽  
Daniel Alquier ◽  
Guylaine Poulin-Vittrant

Flexible piezoelectric nanogenerators (PENGs) are very attractive for mechanical energy harvesting due to their high potential for realizing self-powered sensors and low-power electronics. In this paper, a PENG that is based on zinc oxide (ZnO) nanowires (NWs) is fabricated on flexible and transparent Polydimethylsiloxane (PDMS) substrate. The ZnO NWs were deposited on two different seed layer structures, i.e., gold (Au)/ZnO and tin-doped indium-oxide (ITO)/ZnO, using hydrothermal synthesis. Along with the structural and morphological analyses of ZnO NWs, the electrical characterization was also investigated for ZnO NWs-based flexible PENGs. In order to evaluate the suitability of the PENG device structure, the electrical output performance was studied. By applying a periodic mechanical force of 3 N, the ZnO NWs-based flexible PENG generated a maximum root mean square (RMS) voltage and average power of 2.7 V and 64 nW, respectively. Moreover, the comparison between the fabricated device performances shows that a higher electrical output can be obtained when ITO/ZnO seed layer structure is adopted. The proposed ZnO NWs-based PENG structure can provide a flexible and cost-effective device for supplying portable electronics.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yoshitake Masuda

AbstractCold crystallization of SnO2 was realized in aqueous solutions, where crystal growth was controlled to form SnO2 (101) nanosheet assembled films for devices such as chemical sensors. The nanosheets grew directly on a fluorine-doped tin oxide substrate without a seed layer or a buffer layer. The nanosheets had a thickness of 5–10 nm and an in-plane size of 100–1600 nm. Moreover, the large flat surface of the (101) facet was metastable. The thickness of the SnO2 (101) nanosheet assembled film was approximately 800 nm, and the film had a gradient structure that contained many connected nanosheets. TEM results revealed that the predominate branch angles between any two connected nanosheets were 90° and 46.48°, corresponding to type I and type II connections, respectively. These connections were consistent with the calculations based on crystallography. Crystallographic analysis clarified the characteristic crystal growth of the SnO2 (101) nanosheet assembled film in the aqueous solution. Furthermore, we demonstrate that the metastable (101) facet can be exploited to control the rate of crystal growth by adjusting the etching condition.


Sign in / Sign up

Export Citation Format

Share Document