scholarly journals Thermoelectric Materials: Thermoelectric Properties of Novel Semimetals: A Case Study of YbMnSb 2 (Adv. Mater. 7/2021)

2021 ◽  
Vol 33 (7) ◽  
pp. 2170051
Author(s):  
Yu Pan ◽  
Feng‐Ren Fan ◽  
Xiaochen Hong ◽  
Bin He ◽  
Congcong Le ◽  
...  
Keyword(s):  
Thermoelectric Properties ◽  
Thermoelectric Materials

Effect of Electron-Phonon Coupling on Transport Properties of Monolayers of ZrS2, BiI3 and PbI2: A thermoelectric Perspective

2021 ◽  
Author(s):  
Gautam Sharma ◽  
Vineet Kumar Pandey ◽  
Shouvik Datta ◽  
Prasenjit Ghosh
Keyword(s):  
Relaxation Time ◽  
Band Structure ◽  
Transport Properties ◽  
Thermoelectric Properties ◽  
Thermoelectric Materials ◽  
Waste Heat ◽  
Transport Coefficients ◽  
Electrical Energy ◽  
Phonon Coupling ◽  
Electron Phonon Coupling

Thermoelectric materials are used for conversion of waste heat to electrical energy. The transport coefficients that determine their thermoelectric properties depend on the band structure and the relaxation time of...

Fabrication of Bi-Te Based Thermoelectric Semiconductors by Using Hybrid Powders

2005 ◽  
Vol 297-300 ◽  
pp. 875-880
Author(s):  
Cheol Ho Lim ◽  
Ki Tae Kim ◽  
Yong Hwan Kim ◽  
Dong Choul Cho ◽  
Young Sup Lee ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Single Crystals ◽  
Thermoelectric Properties ◽  
Thermoelectric Materials ◽  
Figure Of Merit ◽  
Bending Strength ◽  
Mixing Ratio ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
P Type

P-type Bi0.5Sb1.5Te3 compounds doped with 3wt% Te were fabricated by spark plasma sintering and their mechanical and thermoelectric properties were investigated. The sintered compounds with the bending strength of more than 50MPa and the figure-of-merit 2.9×10-3/K were obtained by controlling the mixing ratio of large powders (PL) and small powders (PS). Compared with the conventionally prepared single crystal thermoelectric materials, the bending strength was increased up to more than three times and the figure-of-merit Z was similar those of single crystals. It is expected that the mechanical properties could be improved by using hybrid powders without degradation of thermoelectric properties.

A study of the thermoelectric properties of benzo[1,2-b:4,5-b′]dithiophene–based donor–acceptor conjugated polymers

2018 ◽  
Vol 9 (35) ◽  
pp. 4440-4447 ◽  
Author(s):  
Luhai Wang ◽  
Chengjun Pan ◽  
Zhongming Chen ◽  
Xiaoyan Zhou ◽  
Chunmei Gao ◽  
...  
Keyword(s):  
Conjugated Polymers ◽  
Thermoelectric Properties ◽  
Thermoelectric Materials ◽  
Side Chains ◽  
Organic Thermoelectric Materials ◽  
Donor Acceptor

Three benzo[1,2-b:4,5-b′]dithiophene (BDT)-based donor–acceptor (D–A) conjugated polymers with different side chains were designed, synthesized, and investigated as organic thermoelectric materials.

scholarly journals Thermoelectric Properties of Novel Semimetals: A Case Study of YbMnSb 2

2020 ◽  
pp. 2003168
Author(s):  
Yu Pan ◽  
Feng‐Ren Fan ◽  
Xiaochen Hong ◽  
Bin He ◽  
Congcong Le ◽  
...  
Keyword(s):  
Thermoelectric Properties

Nanostructuring SnTe to improve thermoelectric properties through Zn and Sb co-doping

2020 ◽  
Vol 4 (11) ◽  
pp. 5645-5653
Author(s):  
Samuel Kimani Kihoi ◽  
Ho Seong Lee
Keyword(s):  
Thermoelectric Properties ◽  
Thermoelectric Materials ◽  
Temperature Range ◽  
Co Doping

A complex microstructure resulting in SnTe based thermoelectric materials with improved properties in the mid temperature range.

Advanced Thermoelectric Materials and Systems for Automotive Applications in the Next Millennium

1997 ◽  
Vol 478 ◽  
Author(s):  
Donald T. Morelli
Keyword(s):  
Environmental Economic ◽  
Physical Properties ◽  
Thermoelectric Properties ◽  
Thermoelectric Materials ◽  
Experimental Results ◽  
Automotive Applications ◽  
New Materials ◽  
Thermoelectric Devices ◽  
Filled Skutterudites ◽  
Fundamental Physical

AbstractA combination of environmental, economic, and technological drivers has led to a reassessment of the potential for using thermoelectric devices in several automotive applications. In order for this technology to achieve its ultimate potential, new materials with enhanced thermoelectric properties are required. Experimental results on the fundamental physical properties of some new thermoelectric materials, including filled skutterudites and 1–1–1 intermetallic semiconductors, are presented.

Thermoelectric properties of polycrystalline Bi2Se3−x by powder compaction sintering

2020 ◽  
Vol 34 (18) ◽  
pp. 2050206
Author(s):  
Ying Zhou ◽  
Zhenhua Ge ◽  
Jun Guo ◽  
Jing Feng
Keyword(s):  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Carrier Concentration ◽  
Thermoelectric Properties ◽  
Thermoelectric Materials ◽  
Electrical Transport ◽  
Bulk Material ◽  
Powder Compaction ◽  
Electrical Transport Properties ◽  
X Ray

[Formula: see text] is a [Formula: see text] compound (where Pn = Bi and Sb, Ch = Te, Se, and S), which has attracted increasing attention as a candidate for use in thermoelectric applications. Previous studies demonstrated the advantage of [Formula: see text] thermoelectric materials, despite an inferior thermoelectric performance. Herein, a series of [Formula: see text] ([Formula: see text], 0.10, 0.15, 0.20, and 0.25) thermoelectric materials were prepared by powder compaction sintering. The effects of phase structures and microstructure of the [Formula: see text] bulk material were analyzed by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The thermoelectric properties, including Seebeck coefficient, electrical conductivity, and thermal conductivity, were measured systematically. The results show that carrier concentration increased with decreasing Se content, which in turn affected the electrical transport properties. Low Se contents gave larger power factor (PF) values than the pristine [Formula: see text] sample, the maximum PF value being [Formula: see text] at 320 K for [Formula: see text]. The variation in PF was attributed to the variations in electrical conductivity [Formula: see text] and Seebeck coefficient [Formula: see text] upon optimizing Se content. The [Formula: see text] samples showed an enhanced thermoelectric figure of merit (ZT) with increasing measurement temperature, due to the increased [Formula: see text] value, [Formula: see text], and decreased [Formula: see text]. The [Formula: see text] sample exhibited the highest ZT (0.28) at 575 K, while [Formula: see text] exhibited the lowest ZT (0.14) at 325 K. This indicated that tuning Se content was an effective way to enhance carrier concentration.

Synthesis and Thermoelectric Properties of Undoped Half-Heusler Zr-Co-Sb Alloy Processed by Mechanically Alloying and Hot Pressing

2011 ◽  
Vol 695 ◽  
pp. 69-72
Author(s):  
Il Ho Kim ◽  
Joon Chul Kwon ◽  
Young Geun Lee ◽  
Sung Lim Ryu ◽  
Man Soon Yoon ◽  
...  
Keyword(s):  
Mechanical Alloying ◽  
Thermoelectric Properties ◽  
Thermoelectric Materials ◽  
Hot Pressing ◽  
Heusler Alloys ◽  
Processing Route ◽  
Mechanically Alloyed ◽  
Fundamental Study ◽  
Vacuum Hot Pressing ◽  
Fine Grain

Half-Heusler alloys are one of the potential thermoelectric materials for medium to high temperature range application. As a part of fundamental study to establish processing route and to observe thermoelectric properties in undoped state, ZrCoSb was selected, processed and evaluated. In an attempt to produce a half-Heusler thermoelectric materials having ultra fine grain structures, ZrCoSb was synthesized by mechanical alloying of stoichiometric elemental powder compositions, and consolidated by vacuum hot pressing. Phase transformations during mechanical alloying and hot consolidation were investigated using XRD, SEM and EDS. Single-phase, half-Heusler was successfully produced by vacuum hot pressing using as-milled powders without subsequent annealing. Thermoelectric properties as functions of temperature were evaluated in terms of Seebeek coefficient, electrical conductivity, thermal conductivity and the figure of merit for the hot pressed specimens. Mechanically alloyed half-Heusler phase, ZrCoSb, appeared to have a great potential as a thermoelectric materials in this study.

Sign in / Sign up

Export Citation Format

Share Document