Hybrid particulate and fibrous injection molded composites: Carbon black/carbon fiber/polypropylene systems

2005 ◽  
Vol 26 (4) ◽  
pp. 454-464 ◽  
Author(s):  
M. Drubetski ◽  
A. Siegmann ◽  
M. Narkis
Keyword(s):  
Carbon Fiber ◽  
Carbon Black ◽  
Black Carbon ◽  
Injection Molded

Investigation of Electromagnetic Interference Shielding Effectiveness of Cement-Based Composites Filled with Carbon Materials

2010 ◽  
Vol 168-170 ◽  
pp. 1021-1024
Author(s):  
Guo Xuan Xiong ◽  
Zhi Bin Zhang ◽  
Min Deng ◽  
Yu Fen Zhou
Keyword(s):  
Carbon Fiber ◽  
Carbon Black ◽  
Electromagnetic Interference ◽  
Carbon Materials ◽  
Shielding Effectiveness ◽  
Nano Carbon ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Carbon Nano Tube ◽  
Relationship Of ◽  
The Relationship

The cement-based composite shielding materials filled with carbon materials such as ordinary carbon materials (graphite, coke and carbon black), carbon fiber and nano-carbon materials (carbon nano-tube and nano-carbon black) were prepared. The relationship of conductivity and shielding effectiveness in a frequency range of 100 KHz~1.5 GHz was studied. The electric properties of cement-based composites filled with carbon fiber is better than other carbon materials. With the contents of carbon fiber of 5.vol%, the average shielding effectiveness is about 37 dB and the maximum shielding effectiveness reaches 40 dB.

scholarly journals Effect of nano and micro conductive materials on conductive properties of carbon fiber reinforced concrete

2020 ◽  
Vol 9 (1) ◽  
pp. 445-454 ◽  
Author(s):  
Juhong Han ◽  
Dunbin Wang ◽  
Peng Zhang
Keyword(s):  
Carbon Fiber ◽  
Carbon Black ◽  
Steel Slag ◽  
Pressure Sensitivity ◽  
Electric Conduction ◽  
Conductive Materials ◽  
Slag Powder ◽  
Steel Slag Powder ◽  
Resistivity Variation ◽  
Nano Carbon

AbstractIn this study, the pressure sensitivity and temperature sensitivity of the diphasic electric conduction concrete were investigated by measuring the resistivity using the four-electrode method. The diphasic electric conduction concrete was obtained by mixing nano and micro conductive materials (carbon nanofibers, nano carbon black and steel slag powder) into the carbon fiber reinforced concrete (CFRC). The results indicated that, with the increase of conduction time, the resistivity of CFRC decreased slightly at the initial stage and then became steady, while the resistivity of CFRC containing nano carbon black had a sharp decrease at the dosage of 0.6%. With the increase of compression load, the coefficient of resistivity variation of CFRC containing nano carbon black and steel slag powder changed little. The coefficient of resistivity variation increased with the increase of steel slag powder in the dry environment, and CFRC had preferable pressure sensitivity when the mass fractions of carbon fiber and carbon nanofiber were 0.4% and 0.6%, respectively. Besides, in the humid environment, the coefficient of resistivity variation decreased with the increase of steel slag powder, and the diphasic electric conduction concrete containing 0.4% carbon fibers and 20% steel slag powder had the best pressure sensitivity under the damp environment. Moreover, in the dry environment, CFRC containing nano and micro conductive materials presented better temperature sensitivity in the heating stage than in the cooling stage no matter carbon nanofiber, nano carbon black or steel slag powder was used, especially for the CFRC containing steel slag powder.

Reliability in the characterization of fiber length distributions of injection molded long carbon fiber composites

2017 ◽  
Vol 39 (12) ◽  
pp. 4594-4604 ◽  
Author(s):  
Bhisham N. Sharma ◽  
Seth A. Kijewski ◽  
Leonard S. Fifield ◽  
Yongsoon Shin ◽  
Charles L. Tucker ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Fiber Length ◽  
Fiber Composites ◽  
Carbon Fiber Composites ◽  
Injection Molded ◽  
Long Carbon Fiber

Improvement of the electrical conductivity of carbon fiber reinforced polymer by incorporation of nanofillers and the resulting thermal and mechanical behavior

2017 ◽  
Vol 52 (11) ◽  
pp. 1495-1503 ◽  
Author(s):  
K Hamdi ◽  
Z Aboura ◽  
W Harizi ◽  
K Khellil
Keyword(s):  
Electrical Conductivity ◽  
Carbon Fiber ◽  
Carbon Black ◽  
Electrical Current ◽  
Polyamide 6 ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Carbon Fiber Reinforced

This work tends to characterize the effect of carbon black nanofillers on the properties of the woven carbon fiber reinforced thermoplastic polymers. First of all, composites from nanofilled Polyamide 6 resin reinforced by carbon fibers were fabricated. Scanning electron microscopy observations were performed to localize the nanoparticles and showed that particles penetrated the fiber zone. In fact, by reaching this zone, the carbon black nanofillers create a connectivity's network between fibers, which produces an easy pathway for the electrical current. It explains the noticed improvement of the electrical conductivity of the carbon black nanofilled composites. Electrical conductivity of neat matrix composite passed from 20 to 80 S/cm by adding 8 wt% of carbon black and to 140 S/cm by adding 16 wt% of the same nanofiller. The addition of nanofillers modifies the heating and cooling laws of carbon fiber reinforced polymer: the nanofilled carbon fiber reinforced polymer with 16 wt% is the most conductive so it heats less. Based on these results, the use of the composite itself as an indicator of this mechanical state might be possible. In fact, the study of the influence of a mechanical loading on the electrical properties of the composite by recording the variance of an electrical set is possible.

Sign in / Sign up

Export Citation Format

Share Document