Hierarchical Cobalt Phosphide Hollow Nanocages toward Electrocatalytic Ammonia Synthesis under Ambient Pressure and Room Temperature

Small Methods ◽  
2018 ◽  
Vol 2 (12) ◽  
pp. 1800204 ◽  
Author(s):  
Wenhan Guo ◽  
Zibin Liang ◽  
Junliang Zhao ◽  
Bingjun Zhu ◽  
Kunting Cai ◽  
...  
2013 ◽  
Vol 395-396 ◽  
pp. 637-640
Author(s):  
Yi Yang ◽  
Zheng Ping Wang ◽  
Ling Meng ◽  
Lian Jun Wang

MIL-101, a metal-organic framework material, was synthesized by the high-temperature hydrothermal method. Triethylenetetramine (TETA) modification enabled the effective grafting of an amino group onto the surface of the materials and their pore structure. The crystal structure, micromorphology, specific surface area, and pore structure of the samples before and after modification were analyzed with an X-ray diffractometer, scanning electron microscope, specific surface and aperture tester, and infrared spectrometer. The carbon dioxide adsorption properties of the samples were determined by a thermal analyzer before and after TETA modification. Results show that moderate amino modification can effectively improve the microporous structure of MIL-101 and its carbon dioxide adsorption properties. After modification, the capacity of MIL-101 to adsorb carbon dioxide decreased only by 0.61 wt%, and a high adsorption capacity of 9.45 wt% was maintained after six cycles of adsorption testing at room temperature and ambient pressure.


Molecules ◽  
2019 ◽  
Vol 24 (7) ◽  
pp. 1241 ◽  
Author(s):  
Jikuan Qiu ◽  
Yue Zhao ◽  
Yuling Zhao ◽  
Huiyong Wang ◽  
Zhiyong Li ◽  
...  

Recently, the efficient chemical fixation of carbon dioxide (CO2) into high value chemicals without using noble metal catalysts has become extremely appealing from the viewpoint of sustainable chemistry. In this work, a one-pot three component reaction of propargylic alcohols, anines and CO2 that can proceed in an atom economy and environmentally benign manner by combination of CuI and tetrabutylphosphonium imidazol ([P4444][Im]) as a catalyst was described. Catalysis studies indicate that this catalytic system is an effective catalyst for the conversion of CO2 into oxazolidinones at room temperature and ambient pressure without any solvent. The results provide a useful way to design novel noble metal-free catalyst systems for the transformation of CO2 into other valuable compounds.


2020 ◽  
Author(s):  
Christina Wildfire ◽  
Victor Abdelsayed ◽  
Dushyant Shekhawat ◽  
Robert A. Dagle ◽  
Stephen D. Davidson ◽  
...  

Crystals ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 910
Author(s):  
Daniel Diaz-Anichtchenko ◽  
Robin Turnbull ◽  
Enrico Bandiello ◽  
Simone Anzellini ◽  
Daniel Errandonea

We report on high-pressure synchrotron X-ray diffraction measurements on Ni3V2O8 at room-temperature up to 23 GPa. According to this study, the ambient-pressure orthorhombic structure remains stable up to the highest pressure reached in the experiments. We have also obtained the pressure dependence of the unit-cell parameters, which reveals an anisotropic compression behavior. In addition, a room-temperature pressure–volume third-order Birch–Murnaghan equation of state has been obtained with parameters: V0 = 555.7(2) Å3, K0 = 139(3) GPa, and K0′ = 4.4(3). According to this result, Ni3V2O8 is the least compressible kagome-type vanadate. The changes of the crystal structure under compression have been related to the presence of a chain of edge-sharing NiO6 octahedral units forming kagome staircases interconnected by VO4 rigid tetrahedral units. The reported results are discussed in comparison with high-pressure X-ray diffraction results from isostructural Zn3V2O8 and density-functional theory calculations on several isostructural vanadates.


ACS Catalysis ◽  
2015 ◽  
Vol 5 (4) ◽  
pp. 2051-2061 ◽  
Author(s):  
Nicholas C. Nelson ◽  
J. Sebastián Manzano ◽  
Aaron D. Sadow ◽  
Steven H. Overbury ◽  
Igor I. Slowing

1997 ◽  
Vol 472 ◽  
Author(s):  
M.A. El Khakani ◽  
M. Chaker

ABSTRACTReactive pulsed laser deposition has been used to deposit IrO2 thin films on both SiO2 and fused quartz substrates, by ablating a metal iridium target in oxygen atmosphere. At a KrF laser intensity of about 1.7 × 109 W/cm2, IrO2 films were deposited at substrate deposition temperatures ranging from room-temperature to 700 °C under an optimum oxygen ambient pressure of 200 mTorr. The structure, morphology, electrical resistivity and optical transmission of the deposited films were characterized as a function of their deposition temperature (Td). High quality IrO2 films are obtained in the 400–600 °C deposition temperature range. They are polycrystalline with preferred orientations, depending on the substrate, and show a dense granular morphology. At a Td as low as 400 °C, highly conductive IrO2 films with room-temperature resistivities as low as (42±6) μΩ cm are obtained. Over the 300–600 °C Td range, the IrO2 films were found to exhibit a maximum optical transmission at 450 °C (∼ 45 % at 500 nm for 80 nm-thick films).


2017 ◽  
Vol 19 (1) ◽  
pp. 76-81 ◽  
Author(s):  
Luyang Li ◽  
Feng Shen ◽  
Richard L. Smith ◽  
Xinhua Qi

An extraordinarily simple and highly-efficient chemocatalytic system for production of lactic acid (95.4% yield) from glucose at room temperature and ambient pressure is reported.


Sign in / Sign up

Export Citation Format

Share Document