Weighted Type II Bivariate Pólya-Aeppli Distributions

2020 ◽  
pp. 121-157
Author(s):  
Claire Geldenhuys ◽  
René Ehlers
Keyword(s):  
Type Ii ◽  
Weighted Type

Type II Solar Radio Bursts over Solar Cycle 21

1994 ◽  
Vol 144 ◽  
pp. 283-284
Author(s):  
G. Maris ◽  
E. Tifrea
Keyword(s):  
Solar Radio ◽  
Interplanetary Space ◽  
Impulsive Phase ◽  
Radio Bursts ◽  
Type Ii ◽  
Solar Radio Bursts ◽  
Strong Energy ◽  
Mass Ejection ◽  
Geophysical Effect ◽  
Radio Event

The type II solar radio bursts produced by a shock wave passing through the solar corona are one of the most frequently studied solar activity phenomena. The scientific interest in this type of phenomenon is due to the fact that the presence of this radio event in a solar flare is an almost certain indicator of a future geophysical effect. The origin of the shock waves which produce these bursts is not at all simple; besides the shocks which are generated as a result of a strong energy release during the impulsive phase of a flare, there are also the shocks generated by a coronal mass ejection or the shocks which appear in the interplanetary space due to the supplementary acceleration of the solar particles.

Heat-Etching with a Bullivant Type II Simple Freeze-Cleave Device

1970 ◽  
Vol 28 ◽  
pp. 106-107 ◽  
Author(s):  
Ronald S. Weinstein ◽  
N. Scott McNutt
Keyword(s):  
New Zealand ◽  
General Hospital ◽  
Massachusetts General Hospital ◽  
Type I ◽  
Type Ii ◽  
Collaborative Effort ◽  
Temperature And Pressure ◽  
The University

The Type I simple cold block device was described by Bullivant and Ames in 1966 and represented the product of the first successful effort to simplify the equipment required to do sophisticated freeze-cleave techniques. Bullivant, Weinstein and Someda described the Type II device which is a modification of the Type I device and was developed as a collaborative effort at the Massachusetts General Hospital and the University of Auckland, New Zealand. The modifications reduced specimen contamination and provided controlled specimen warming for heat-etching of fracture faces. We have now tested the Mass. General Hospital version of the Type II device (called the “Type II-MGH device”) on a wide variety of biological specimens and have established temperature and pressure curves for routine heat-etching with the device.

Ultrastructure of pulmonary microvasculature in acute endotoxemia

1978 ◽  
Vol 36 (2) ◽  
pp. 470-471
Author(s):  
R. G. Gerrity ◽  
M. Richardson
Keyword(s):  
Polymorphonuclear Leukocytes ◽  
Alveolar Epithelium ◽  
Endothelial Damage ◽  
Capillary Endothelium ◽  
Type Ii Cells ◽  
Type Ii ◽  
Interstitial Edema ◽  
Pulmonary Capillaries ◽  
Lung Ultrastructure ◽  
Fibrin Thrombi

Dogs were injected intravenously with E_. coli endotoxin (2 mg/kg), and lung samples were taken at 15 min., 1 hr. and 24 hrs. At 15 min., occlusion of pulmonary capillaries by degranulating platelets and polymorphonuclear leukocytes (PML) was evident (Fig. 1). Capillary endothelium was intact but endothelial damage in small arteries and arterioles, accompanied by intraalveolar hemorrhage, was frequent (Fig. 2). Sloughing of the surfactant layer from alveolar epithelium was evident (Fig. 1). At 1 hr., platelet-PML plugs were no longer seen in capillaries, the endothelium of which was often vacuolated (Fig. 3). Interstitial edema and destruction of alveolar epithelium were seen, and type II cells had discharged their granules into the alveoli (Fig. 4). At 24 hr. phagocytic PML's were frequent in peripheral alveoli, while centrally, alveoli and vessels were packed with fibrin thrombi and PML's (Fig. 5). In similar dogs rendered thrombocytopenic with anti-platelet serum, lung ultrastructure was similar to that of controls, although PML's were more frequently seen in capillaries in the former (Fig. 6).

Mitochondria microcrystals deposition in some inherited diseases of lipid metabolism.

1978 ◽  
Vol 36 (2) ◽  
pp. 256-257
Author(s):  
S. Laoussadi ◽  
A. Kahan ◽  
G. Aubouy ◽  
F. Delbarre
Keyword(s):  
Synovial Tissue ◽  
Storage Disease ◽  
Metabolic Diseases ◽  
Uranyl Acetate ◽  
List Type ◽  
Type Ii ◽  
Type Number ◽  
Lipid Storage Disease ◽  
Thin Sections ◽  
Mean Size

Several patients with Fabry's, Gaucher's diseases and hyperlipoproteinemia type II and with arthropatic manifestations were observed.As no histological explanation for these symptoms was available,an ultrastructural study of synovial tissue was done to establish an anatomoclinical relation.Material and Methods :synovial membrane samples were obtained by needle biopsies of the knee from three patients with arthropatic manifestations of each disease.They were fixed in 5% glutaraldehyde, postfixed in 1% osmium tetraoxyde and embedded in Epon 812. Thin sections coloured by uranyl acetate and lead citrate were observed with an Elmiskop I Siemens electron microscope.Two important phenomena were observed in synovial tissue:Specific patterns of each lipid storage disease,which are now well known.In all the three metabolic diseases, hydroxyapatite-like crystals were found. They are characterized by their intramitochondrial localization, without any relation with cristae,an anarchic disposition and a mean size of 550 A.Crystals may be found also free in the cytoplasm of synoviocytes Some micrographs suggest an evolution in four steps :a. mitochondria with only a few microcrystalsb. mitochondria stuffed with these structuresc. disruption of mitochondria membranesd. microcrystals appear free in the cytoplasm

Labelling of non-A, non-B hepatitis infected chimpanzee hepatocytes with nuclease-gold conjugates

1984 ◽  
Vol 42 ◽  
pp. 250-251
Author(s):  
G. D. Gagne ◽  
M. F. Miller ◽  
D. A. Peterson
Keyword(s):  
Endoplasmic Reticulum ◽  
Experimental Infection ◽  
Uranyl Acetate ◽  
Type I ◽  
Cellular Injury ◽  
Type Ii ◽  
Tubular Structures ◽  
Type Iii ◽  
Type Iv ◽  
Infected Chimpanzee

Experimental infection of chimpanzees with non-A, non-B hepatitis (NANB) or with delta agent hepatitis results in the appearance of characteristic cytoplasmic alterations in the hepatocytes. These alterations include spongelike inclusions (Type I), attached convoluted membranes (Type II), tubular structures (Type III), and microtubular aggregates (Type IV) (Fig. 1). Type I, II and III structures are, by association, believed to be derived from endoplasmic reticulum and may be morphogenetically related. Type IV structures are generally observed free in the cytoplasm but sometimes in the vicinity of type III structures. It is not known whether these structures are somehow involved in the replication and/or assembly of the putative NANB virus or whether they are simply nonspecific responses to cellular injury. When treated with uranyl acetate, type I, II and III structures stain intensely as if they might contain nucleic acids. If these structures do correspond to intermediates in the replication of a virus, one might expect them to contain DNA or RNA and the present study was undertaken to explore this possibility.

Interfacial studies in Nb3Sn superconductors

1991 ◽  
Vol 49 ◽  
pp. 590-591
Author(s):  
Ernest L. Hall ◽  
Lee E. Rumaner ◽  
Mark G. Benz
Keyword(s):  
Grain Size ◽  
Grain Boundaries ◽  
Flux Pinning ◽  
Size Control ◽  
High Magnetic Fields ◽  
Type Ii ◽  
Reaction Interface ◽  
Liquid Diffusion ◽  
Type Ii Superconductor ◽  
Grain Size Control

The intermetallic compound Nb3Sn is a type-II superconductor of interest because it has high values of critical current density Jc in high magnetic fields. One method of forming this compound involves diffusion of Sn into Nb foil containing small amounts of Zr and O. In order to maintain high values of Jc, it is important to keep the grain size in the Nb3Sn as small as possible, since the grain boundaries act as flux-pinning sites. It has been known for many years that Zr and O were essential to grain size control in this process. In previous work, we have shown that (a) the Sn is transported to the Nb3Sn/Nb interface by liquid diffusion along grain boundaries; (b) the Zr and O form small ZrO2 particles in the Nb3Sn grains; and (c) many very small Nb3Sn grains nucleate from a single Nb grain at the reaction interface. In this paper we report the results of detailed studies of the Nb3Sn/Nb3Sn, Nb3Sn/Nb, and Nb3Sn/ZrO2 interfaces.

Comparative surface and ultrastructural views of methylotrophic bacteria by TEM, STEM, SE, and freeze-etch electron microscopy.

1987 ◽  
Vol 45 ◽  
pp. 792-793
Author(s):  
T.A. Fassel ◽  
M.J. Schaller ◽  
M.E. Lidstrom ◽  
C.C. Remsen
Keyword(s):  
Cytoplasmic Membrane ◽  
Structural Features ◽  
Methylotrophic Bacteria ◽  
Type I ◽  
Type Ii ◽  
Membrane Complex ◽  
Oxidation Of Methane ◽  
Methane Oxidizing Bacteria ◽  
Wall Structures ◽  
Methylomonas Albus

Methylotrophic bacteria play an Important role in the environment in the oxidation of methane and methanol. Extensive intracytoplasmic membranes (ICM) have been associated with the oxidation processes in methylotrophs and chemolithotrophic bacteria. Classification on the basis of ICM arrangement distinguishes 2 types of methylotrophs. Bundles or vesicular stacks of ICM located away from the cytoplasmic membrane and extending into the cytoplasm are present in Type I methylotrophs. In Type II methylotrophs, the ICM form pairs of peripheral membranes located parallel to the cytoplasmic membrane. Complex cell wall structures of tightly packed cup-shaped subunits have been described in strains of marine and freshwater phototrophic sulfur bacteria and several strains of methane oxidizing bacteria. We examined the ultrastructure of the methylotrophs with particular view of the ICM and surface structural features, between representatives of the Type I Methylomonas albus (BG8), and Type II Methylosinus trichosporium (OB-36).

The Identification of Phospholipid Micelles in Glutaraldehyde-Urea Embedded Tissue

1975 ◽  
Vol 33 ◽  
pp. 494-495
Author(s):  
Daniel C. Pease
Keyword(s):  
Electron Micrographs ◽  
Lung Tissue ◽  
Osmium Tetroxide ◽  
Uranyl Acetate ◽  
Type Ii ◽  
Lead Citrate ◽  
Phospholipid Micelles ◽  
Type Ii Pneumocytes ◽  
Ultrathin Sections ◽  
Polar Water

It is reasonable to think that phospholipid micelles should be visible and identifiable in electron micrographs of ultrathin sections if only they can be preserved throughout the embedding process. The development of highly polar, water-containing, aminoplastic embedments has made this a likely possibility. With this in mind, an investigation of the lecithin-secreting, Type II pneumocytes of the lung is underway.Initially it has been easiest to recognize phospholipid micelles in lung tissue fixed first with glutaraldehyde, and then secondarily exposed to osmium tetroxide. However, the latter is not a necessary concomitant for micellar preservation. Conventional uranyl acetate and lead citrate staining is finally applied. Importantly, though, the micelles have been most easily seen in tissue embedded in 507. glutaraldehyde polymerized with urea, as described in detail by D.C. Pease and R.G. Peterson (J. Ultra- struct. Res., 41, 133, 1972). When oriented appropriately, the micellar units are seen as tiny, bilayer plates.

The distribution and density of ciliary tufts on the siphons of Anodonta cygnea (Mollusca: Bivalvia)

1990 ◽  
Vol 48 (3) ◽  
pp. 518-519
Author(s):  
Wen-lung Wu
Keyword(s):  
Osmium Tetroxide ◽  
Internal Surface ◽  
Mechanical Stimuli ◽  
Type Ii ◽  
Sensory Receptors ◽  
Anodonta Cygnea ◽  
Type Iv ◽  
Sem Study ◽  
Inhalant Siphon ◽  
Type V

The mantle of bivalves has come entirely to enclose the laterally compressed body and the mantle margin has assumed a variety of functions, one of the pricipal ones being sensory. Ciliary tufts, which are probably sensory, have been reported from the mantle and siphons of several bivalves1∽4. Certain regions of the mantle margin are likely to be more or less, sensitive to certain stimuli than others. The inhalant siphon is likely to be particularly sensitive to both chemical and mechanical stimuli, whereas the exhalant siphon will be less sensitive to both. The distribution and density of putative sensory receptors on the in-and ex-halant siphon is compared in this paper.The excised siphons were fixed in glutaraldehyde and osmium tetroxide, the whole procedure of SEM study is recorded in Wu's thesis.Type II cilia cover the tips of tentacles, 6.13um. Type IV and type V cilia are found on the surface of tentacles. Type IV cilia are occasionally present at the tips of tentacles, 8 um long. They are the commonest type on the surface of tentacles. Type VI cilia occor in the internal surface of the inhalant siphon, but are not found on the surface of tentacles, 6.7-10um long.

A new method for the observation of Type II magnetic contrast

1990 ◽  
Vol 48 (4) ◽  
pp. 764-765
Author(s):  
R.P. Ferrier ◽  
S. McVitie
Keyword(s):  
Domain Walls ◽  
Incident Beam ◽  
Objective Lens ◽  
Type Ii ◽  
Backscattering Coefficient ◽  
Magnetic Contrast ◽  
Standard Geometry ◽  
Backscattered Electron ◽  
Imaging Performance ◽  
Good Probe

Type II magnetic contrast was first observed by Philibert and Tixier and relies on the change in the effective backscattering coefficient due to interaction of the scattered electrons within the specimen and the local magnetic induction (for a review see Tsuno). Depending on the tilt of the specimen and the position of the backscattered electron detector(s), contrast due to the presence of either or both domains and domain walls can be obtained; in the case of the latter, the standard geometry is for the specimen to be normal to the incident beam and the detectors are positioned above it and close to the optic axis. This is the geometry adopted in our studies, which used a JEOL 2000FX with a special split objective lens polepiece; this permitted the specimen to be in magnetic field-free space, the separate lens gaps above and below allowing good probe forming capabilities combined with excellent Lorentz imaging performance. A schematic diagram is shown in Fig. 1.

Sign in / Sign up

Export Citation Format

Share Document