Pressure Head Dynamics on a Natural Slope in Eastern Iburi Struck by the 2018 Hokkaido Earthquake

2020 ◽  
pp. 81-86
Author(s):  
Toshiya Aoki ◽  
Shin’ya Katsura ◽  
Takahiko Yoshino ◽  
Takashi Koi ◽  
Yasutaka Tanaka ◽  
...  
Keyword(s):  
Pressure Head ◽  
Natural Slope

PERFORMANCE OF SMALL CAPACITY SOLAR PUMP IN EASTERN REGION OF INDIA

2020 ◽  
Vol 7 (01) ◽  
Author(s):  
ATIQUR RAHMAN
Keyword(s):  
Energy Use ◽  
Pressure Head ◽  
Eastern Region ◽  
Groundwater Abstraction ◽  
Annual Fluctuation ◽  
Fuel Prices ◽  
Delivery Pressure ◽  
Current Scenario ◽  
Use Efficiency ◽  
Solar Pump

Solar energy use for groundwater abstraction is one of the most viable options for smallholders’ irrigation in current scenario of increasing fuel prices. Therefore, the dissemination and adoption of solar pumps of low capacities among these farmers is in demand. In this paper a case study was in eastern region to assess the performance of 3horsepower solar pump, as this capacity pump is currently being promoted by the governments to small farmers at subsidised rates. In eastern region where groundwater regime in most of the area is ranging5-10 m bgl with annual fluctuation of ±2 to ±4 m, and abstracted groundwater by a 3 horsepower solar pumpis rangedfrom 100-173 m3/day, depending upon the months on a bright day. Thispump also offers a delivery pressure head 1.0- 1.5 kg/cm2, and therefore facilitates pressured irrigation for improved water use efficiency.

ON THE EVALUATING RISK METHOD OF NATURAL SLOPE FAILURE BASED ON STORAGE HEIGHT

2018 ◽  
Vol 74 (4) ◽  
pp. I_1267-I_1272
Author(s):  
Shoichi UEMURA ◽  
Yasuyuki UJIHASHI ◽  
Shinya HIRAMATSU ◽  
Hiroto SUZUKI
Keyword(s):  
Slope Failure ◽  
Natural Slope

scholarly journals Physics-Based Relationship for Pore Pressure and Vertical Stress Monitoring Using Seismic Velocity Variations

2021 ◽  
Vol 13 (14) ◽  
pp. 2684
Author(s):  
Eldert Fokker ◽  
Elmer Ruigrok ◽  
Rhys Hawkins ◽  
Jeannot Trampert
Keyword(s):  
Pore Pressure ◽  
Seismic Velocity ◽  
Pressure Head ◽  
Groundwater Table ◽  
Surface Velocity ◽  
Seismic Velocities ◽  
Stress Monitoring ◽  
Near Surface ◽  
Velocity Variations ◽  
Velocity Changes

Previous studies examining the relationship between the groundwater table and seismic velocities have been guided by empirical relationships only. Here, we develop a physics-based model relating fluctuations in groundwater table and pore pressure with seismic velocity variations through changes in effective stress. This model justifies the use of seismic velocity variations for monitoring of the pore pressure. Using a subset of the Groningen seismic network, near-surface velocity changes are estimated over a four-year period, using passive image interferometry. The same velocity changes are predicted by applying the newly derived theory to pressure-head recordings. It is demonstrated that the theory provides a close match of the observed seismic velocity changes.

Electrostatic bellow muscle actuators and energy harvesters that stack up

2021 ◽  
Vol 6 (51) ◽  
pp. eaaz5796
Author(s):  
I. D. Sîrbu ◽  
G. Moretti ◽  
G. Bortolotti ◽  
M. Bolignari ◽  
S. Diré ◽  
...  
Keyword(s):  
High Performance ◽  
High Reliability ◽  
Low Cost ◽  
Artificial Muscle ◽  
Pressure Head ◽  
Robotic Systems ◽  
Maximum Pressure ◽  
Term Operation ◽  
Energy Harvesters ◽  
Out Of Plane

Future robotic systems will be pervasive technologies operating autonomously in unknown spaces that are shared with humans. Such complex interactions make it compulsory for them to be lightweight, soft, and efficient in a way to guarantee safety, robustness, and long-term operation. Such a set of qualities can be achieved using soft multipurpose systems that combine, integrate, and commute between conventional electromechanical and fluidic drives, as well as harvest energy during inactive actuation phases for increased energy efficiency. Here, we present an electrostatic actuator made of thin films and liquid dielectrics combined with rigid polymeric stiffening elements to form a circular electrostatic bellow muscle (EBM) unit capable of out-of-plane contraction. These units are easy to manufacture and can be arranged in arrays and stacks, which can be used as a contractile artificial muscle, as a pump for fluid-driven soft robots, or as an energy harvester. As an artificial muscle, EBMs of 20 to 40 millimeters in diameter can exert forces of up to 6 newtons, lift loads over a hundred times their own weight, and reach contractions of over 40% with strain rates over 1200% per second, with a bandwidth over 10 hertz. As a pump driver, these EBMs produce flow rates of up to 0.63 liters per minute and maximum pressure head of 6 kilopascals, whereas as generator, they reach a conversion efficiency close to 20%. The compact shape, low cost, simple assembling procedure, high reliability, and large contractions make the EBM a promising technology for high-performance robotic systems.

scholarly journals Optimal Location of Energy Dissipation Box in Long Distance and High Drop Gravitational Water Supply System

Water ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 461
Author(s):  
Weixiang Ni ◽  
Jian Zhang ◽  
Sheng Chen
Keyword(s):  
Energy Dissipation ◽  
Water Supply ◽  
Water Level ◽  
Pressure Head ◽  
Optimal Location ◽  
Water Supply Systems ◽  
Protective Effects ◽  
Long Distance ◽  
Optimal Position ◽  
Gravitational Flow

In the long-distance and high-drop gravitational water supply systems, the water level difference between the upstream and downstream is large. Thus, it is necessary to ensure energy dissipation and pressure head reduction to reduce the pipeline pressure head. The energy dissipation box is a new type of energy dissipation and pressure head reduction device, which is widely used in the gravitational flow transition systems. At present, there is still a dearth of systematic knowledge about the performance of energy dissipation boxes. In this paper, a relationship between the location of the energy dissipation box and the pressure head amplitude is established, a theoretical optimal location equation of the energy dissipation box is derived, and numerical simulations using an engineering example are carried out for verification. The protective effects of an energy dissipation box placed at the theoretical optimal location and an upstream location are compared. The results indicate that for the same valve action time, the optimal position allows effectively reducing the total volume of energy dissipation box. The oscillation amplitudes of the water level in the box and the pressure head behind the box are markedly reduced. Under the condition that the water level oscillation of the energy dissipation box is almost the same, the optimal location offers better pressure head reduction protection performance than the upstream location.

scholarly journals Impact of Orifice-to-Pipe Diameter Ratio on Leakage Flow: An Experimental Study

Water ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 2189
Author(s):  
Tingchao Yu ◽  
Xiangqiu Zhang ◽  
Iran E. Lima Neto ◽  
Tuqiao Zhang ◽  
Yu Shao ◽  
...  
Keyword(s):  
Experimental Study ◽  
Flow Rate ◽  
Pipe Wall ◽  
Pressure Head ◽  
Diameter Ratio ◽  
Pipe Diameter ◽  
Leakage Flow ◽  
Leakage Flow Rate ◽  
Different Shapes ◽  
Real Scale

The traditional orifice discharge formula used to estimate the flow rate through a leak opening at a pipe wall often produces inaccurate results. This paper reports an original experimental study in which the influence of orifice-to-pipe diameter ratio on leakage flow rate was investigated for several internal/external flow conditions and orifice holes with different shapes. The results revealed that orifice-to-pipe diameter ratio (or pipe wall curvature) indeed influenced the leakage flow, with the discharge coefficient ( C d ) presenting a wide variation (0.60–0.85). As the orifice-to-pipe diameter ratio decreased, the values of C d systematically decreased from about 12% to 3%. Overall, the values of C d also decreased with β (ratio of pressure head differential at the orifice to wall thickness), as observed in previous studies. On the other hand, orifice shape, main pipe flow velocity, and external medium (water or air) all had a secondary effect on C d . The results obtained in the present study not only demonstrated that orifice-to-pipe diameter ratio affects the outflow, but also that real scale pipes may exhibit a relevant deviation of C d from the classical range (0.61–0.67) reported in the literature.

FEM Analysis and Experimental Study for Bond Strength of High-Strength Coating by Wedged Load Test Method

2010 ◽  
Vol 152-153 ◽  
pp. 1058-1061
Author(s):  
Zhou Wei ◽  
Xiao Xia Zhang
Keyword(s):  
Bond Strength ◽  
Adhesion Strength ◽  
Fem Analysis ◽  
High Strength ◽  
Pressure Head ◽  
Optical Microscope ◽  
Complex Stress ◽  
Complex Stress State ◽  
Load Test ◽  
Test Method

A wedged load test method is used to evaluate the adhesion strength of high-strength coatings, which have been processed with various sintering parameters. In this test, for stress concentration at cut tip, cracks are always induced and expanded rapidly cross the interface between coating and substrate. Macro-fracture and SEM image of coating interface of high-strength coating are characterized using optical microscope and scanning electron microscopy (SEM), respectively. In order to evaluate the bonding properties between coating and substrate effectively, corresponding finite element (FE) analysis has been conducted to evaluate the adhesion strength of high-strength coating. And stress distributions cross the interface of high-strength coating are obtained. The stress analysis can help to evaluate the bond strength of high-strength coating. Because of small specimen and contact relationship between wedged pressure head and wedged cuts, complex stress state is affected by many factors resulting from interface, and also by the thickness of coating.

The Effect of Incorporating Vessel Compliance in a Computational Model of Blood Flow in a Total Cavopulmonary Connection (TCPC) with Caval Centerline Offset

2004 ◽  
Vol 126 (6) ◽  
pp. 709-713 ◽  
Author(s):  
J. C. Masters ◽  
M. Ketner ◽  
M. S. Bleiweis ◽  
M. Mill ◽  
A. Yoganathan ◽  
...  
Keyword(s):  
Blood Flow ◽  
Power Loss ◽  
Fluid Dynamic ◽  
Reducing Power ◽  
Pressure Head ◽  
Congenital Defects ◽  
Total Cavopulmonary Connection ◽  
Flow Mixing ◽  
The Right ◽  
Cavopulmonary Connection

Background—The total cavopulmonary connection (TCPC), a palliative correction for congenital defects of the right heart, is based on the corrective technique developed by Fontan and Baudet. Research into the TCPC has primarily focused on reducing power loss through the connection as a means to improve patient longevity and quality of life. The goal of our study is to investigate the efficacy of including a caval offset on the hemodynamics and, ultimately, power loss of a connection. As well, we will quantify the effect of vessel wall compliance on these factors and, in addition, the distribution of hepatic blood to the lungs. Methods—We employed a computational fluid dynamic model of blood flow in the TCPC that includes both the non-Newtonian shear thinning characteristics of blood and the nonlinear compliance of vessel tissue. Results—Power loss in the rigid-walled simulations decayed exponentially as caval offset increased. The compliant-walled results, however, showed that after an initial substantial decrease in power loss for offsets up to half the caval diameter, power loss increased slightly again. We also found only minimal mixing in both simulations of all offset models. Conclusions—The increase in power loss beyond an offset of half the caval diameter was due to an increase in the kinetic contribution. Reduced caval flow mixing, on the other hand, was due to the formation of a pressure head in the offset region which acts as a barrier to flow.

VISCOSITY OF NATURAL RUBBER SOLUTIONS AT VERY LOW RATES OF SHEAR

1957 ◽  
Vol 35 (4) ◽  
pp. 381-387 ◽  
Author(s):  
Morton A. Golub
Keyword(s):  
Experimental Data ◽  
Natural Rubber ◽  
Pressure Head ◽  
Viscosity Data ◽  
Theoretical Relation ◽  
Newtonian Flow ◽  
Shear Rates ◽  
Reduced Viscosity ◽  
Wide Range ◽  
Composite Data

The shear dependence of viscosity of benzene solutions of natural rubber was studied at rates of shear from about 500 down to less than 1 sec.−1. Measurements involved following the change of pressure head with time of the various solutions flowing in a capillary, U-tube viscometer. Curvature in the plots of the logarithm of pressure head versus time indicated non-Newtonian flow. From such curves, reduced viscosity data over the above-mentioned shear range were readily derived. As a check, data over the range 100–500 sec.−1 were also obtained with a five-bulb viscometer of the Krigbaum–Flory type, and these data overlapped those obtained with the U tube. The reduced viscosity increased very sharply with decrease in gradient, making extrapolation to the viscosity axis quite unreliable. However, a theoretical relation proposed by Bueche fitted the composite data rather well. This work furnished a nice technique for determining the zero shear reduced viscosity (ηap/c)0 without the necessity of performing an uncertain extrapolation: evaluate the parameters of the Bueche formula which best satisfies the experimental data over a fairly wide range of shear rates, and then calculate (ηap/c)0 directly.

Sign in / Sign up

Export Citation Format

Share Document