Braid Chain Radio Communication

2017 ◽  
pp. 223-235
Author(s):  
Jacek Cichoń ◽  
Mirosław Kutyłowski ◽  
Kamil Wolny
Keyword(s):  
Radio Communication

Localization of a Complex Failure by Combining ATPG and Customer-Oriented Application Testing

2013 ◽  
Author(s):  
Kai Wang ◽  
Rhys Weaver ◽  
David Johnson
Keyword(s):  
Failure Analysis ◽  
Semiconductor Device ◽  
Digital Design ◽  
Radio Communication ◽  
Communication Failure ◽  
Systemic Analysis ◽  
Rf Communication ◽  
System On A Chip ◽  
Electrical Diagnostics ◽  
Failure Location

Abstract A systemic analysis was chosen to evaluate a real case Bluetooth (BT) radio failure in the aspects of RF communication, digital design, firmware, application software, semiconductor device physics and processing, and failure analysis. This paper explores the range of testing, including customer application testing, required to confirm and localize a BT RF communication failure. It shows that the radio communication failure was not, as expected, caused by faulty radio hardware; it was rather linked to problematic encryption hardware at the assistance of the Synergy BT to mobile application. The paper also explores that the digital fault can only be detected by the timing sensitive transition fault scan patterns and how to obtain the physical failure location. Thus, the combination of ATPG and application testing provides a consistency between electrical diagnostics which yields a higher success rate at subsequent physical failure analysis of complex modern RF System on a Chip.

scholarly journals Influence of Aircraft Power Electronics Processing on Backup VHF Radio Systems

Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 777
Author(s):  
Jan Leuchter ◽  
Radim Bloudicek ◽  
Jan Boril ◽  
Josef Bajer ◽  
Erik Blasch
Keyword(s):  
Power Electronics ◽  
Electromagnetic Interference ◽  
Communication Systems ◽  
Electromagnetic Compatibility ◽  
Intermediate Frequency ◽  
Radio Communication ◽  
Very High Frequency ◽  
Switching Power ◽  
Radio Systems ◽  
The Impact

The paper describes the influence of power electronics, energy processing, and emergency radio systems (ERS) immunity testing on onboard aircraft equipment and ground stations providing air traffic services. The implementation of next-generation power electronics introduces potential hazards for the safety and reliability of aircraft systems, especially the interferences from power electronics with high-power processing. The paper focuses on clearly identifying, experimentally verifying, and quantifiably measuring the effects of power electronics processing using switching modes versus the electromagnetic compatibility (EMC) of emergency radio systems with electromagnetic interference (EMI). EMI can be very critical when switching power radios utilize backup receivers, which are used as aircraft backup systems or airport last-resort systems. The switching power electronics process produces interfering electromagnetic energy to create problems with onboard aircraft radios or instrument landing system (ILS) avionics services. Analyses demonstrate significant threats and risks resulting from interferences between radio and power electronics in airborne systems. Results demonstrate the impact of interferences on intermediate-frequency processing, namely, for very high frequency (VHF) radios. The paper also describes the methodology of testing radio immunity against both weak and strong signals in accordance with recent aviation standards and guidance for military radio communication systems in the VHF band.

scholarly journals A line-of-sight channel model for the 100–450 gigahertz frequency band

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Joonas Kokkoniemi ◽  
Janne Lehtomäki ◽  
Markku Juntti
Keyword(s):  
Channel Model ◽  
Full Range ◽  
Line Of Sight ◽  
Absorption Loss ◽  
Radio Communication ◽  
International Telecommunication Union ◽  
International Telecommunication ◽  
Fifth Generation ◽  
Proposed Model ◽  
Actual Response

AbstractThis paper documents a simple parametric polynomial line-of-sight channel model for 100–450 GHz band. The band comprises two popular beyond fifth generation (B5G) frequency bands, namely, the D band (110–170 GHz) and the low-THz band (around 275–325 GHz). The main focus herein is to derive a simple, compact, and accurate molecular absorption loss model for the 100–450 GHz band. The derived model relies on simple absorption line shape functions that are fitted to the actual response given by complex but exact database approach. The model is also reducible for particular sub-bands within the full range of 100–450 GHz, further simplifying the absorption loss estimate. The proposed model is shown to be very accurate by benchmarking it against the exact response and the similar models given by International Telecommunication Union Radio Communication Sector. The loss is shown to be within ±2 dBs from the exact response for one kilometer link in highly humid environment. Therefore, its accuracy is even much better in the case of usually considered shorter range future B5G wireless systems.

Sign in / Sign up

Export Citation Format

Share Document