Procedure for plotting maps of the disturbance of rock masses from geophysical logging data. Part III: Comparative analysis of geophysical maps of rock mass disturbance with geological data

1992 ◽  
Vol 28 (2) ◽  
pp. 105-113 ◽  
Author(s):  
M. V. Kurlenya ◽  
V. N. Oparin ◽  
G. G. Matasova ◽  
A. P. Tapsiev ◽  
G. A. Tapsiev ◽  
...  
Keyword(s):  
Rock Mass ◽  
Comparative Analysis ◽  
Geological Data ◽  
Rock Masses ◽  
Geophysical Logging

Analysis of Unstable Rock-Mass Stability Based on Limit Equilibrium Method and Strength Reduction Method

2016 ◽  
Vol 858 ◽  
pp. 73-80
Author(s):  
Ying Kong ◽  
Hua Peng Shi ◽  
Hong Ming Yu
Keyword(s):  
Rock Mass ◽  
Failure Mode ◽  
Posterior Margin ◽  
Reduction Method ◽  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
Strength Reduction ◽  
Strength Reduction Method ◽  
Rock Masses ◽  
Unstable Rock

With the slope unstable rock masses of a stope in Longsi mine, Jiaozuo City, China as the target, we computed and analyzed the stability of unstable rock masses using a limit equilibrium method (LEM) and a discrete element strength reduction method (SRM). Results show that the unstable rock masses are currently stable. Under the external actions of natural weathering, rainfall and earthquake, unstable rock mass 1 was manifested as a shear slip failure mode, and its stability was controlled jointly by bedding-plane and posterior-margin steep inclined joints. In comparison, unstable rock mass 2 was manifested as a tensile-crack toppling failure mode, and its stability was controlled by the perforation of posterior-margin joints. From the results of the 2 methods we find the safety factor determined from SRM is larger, but not significantly, than that from LEM, and SRM can simulate the progressive failure process of unstable rock masses. SRM also provides information about forces and deformation (e.g. stress-strain, and displacement) and more efficiently visualizes the parts at the slope that are susceptible to instability, suggesting SRM can be used as a supplementation of LEM.

Implementation of InfraRed Thermographic surveys in complex coastal areas: the case study of Polignano a Mare (southern Italy)

2021 ◽  
Author(s):  
Lidia Loiotine ◽  
Marco La Salandra ◽  
Gioacchino Francesco Andriani ◽  
Eliana Apicella ◽  
Michel Jaboyedoff ◽  
...  
Keyword(s):  
Rock Mass ◽  
Structure From Motion ◽  
Southern Italy ◽  
Thermal Imager ◽  
Rock Masses ◽  
Field Surveys ◽  
Thermal Images ◽  
Thermal Anomalies ◽  
Rock Face

<p><em>InfraRed Thermography</em> (IRT) spread quickly during the second half of the 20<sup>th</sup> century in the military, industrial and medical fields. This technique is at present widely used in the building sector to detect structural defects and energy losses. Being a non-destructive diagnostic technique, IRT was also introduced in the Earth Sciences, especially in the volcanology and environmental fields, yet its application for geostructural surveys is of recent development. Indeed, the acquisition of thermal images on rock masses could be an efficient tool for identifying fractures and voids, thus detecting signs of potential failures.<br>Further tests of thermal cameras on rock masses could help to evaluate the applicability, advantages and limits of the IRT technology for characterizing rock masses in different geological settings.<br>We present some results of IRT surveys carried out in the coastal area of Polignano a Mare (southern Italy), and their correlation with other remote sensing techniques (i.e. <em>Terrestrial Laser Scanning</em> and <em>Structure from Motion</em>). The case study (<em>Lama Monachile</em>) is represented by a 20 m-high cliff made up of Plio-Pleistocene calcarenites overlying Cretaceous limestones. Conjugate fracture systems, karst features, folds and faults, were detected in the rock mass during field surveys. In addition, dense vegetation and anthropogenic elements, which at places modified the natural setting of the rock mass, represent relevant disturbances for the characterization of the rock mass. In this context, IRT surveys were added to the other techniques, aimed at detecting the major discontinuities and fractured zones, based on potential thermal anomalies. <br>IRT surveys were carried out in December 2020 on the east side of the rock mass at <em>Lama Monachile</em> site. Thermal images were acquired every 20 minutes for 24 hours by means of a FLIR T-660 thermal imager mounted on a fixed tripod. Ambient air temperature and relative humidity were measured during the acquisition with a pocketsize thermo-hydrometer. A reflective paper was placed at the base of the cliff to measure the reflected apparent temperature. In addition, three thermocouple sensors were fixed to the different lithologic units of the rock face. These parameters, together with the distance between the FLIR T-660 and the rock face, were used in order to calibrate the thermal imager and correct the apparent temperatures recorded by the device, during the post-processing phase. Successively, vertical profiles showing the temperature of the rock face over time were extracted from the thermograms. Thermal anomalies were correlated with stratigraphic and Geological Strength Index profiles, obtained by means of field surveys and Structure from Motion techniques. The presence of fracture and voids in the rock mass was also investigated.</p>

scholarly journals Analysis of Shear Characteristics of Deep, Anchored Rock Mass under Creep Fatigue Loading

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Xiaofeng Li ◽  
Zhixiang Yin
Keyword(s):  
Rock Mass ◽  
Rock Strength ◽  
Low Frequency ◽  
Fatigue Loading ◽  
Load Level ◽  
Rock Masses ◽  
Sandstone Rock ◽  
Fatigue Model ◽  
Creep Fatigue ◽  
Marble Rock

To study the influence of earthquakes and engineering disturbances on the deformation of deeply buried rock masses, shear tests were carried out on anchored sandstone rock masses, anchored marble rock masses, and anchored granite rock masses under creep fatigue loading, and a new creep fatigue model was established to characterize the deformation characteristics of anchored rock masses under creep fatigue loading. The creep fatigue curves of different lithologies clearly show three stages: creep attenuation, steady-state creep, and accelerated creep. Fatigue loading can increase the creep of anchored specimens, and the lower the rock strength is, the higher the creep variable under fatigue loading is. However, for the same rock strength, with the increase in load level, the creep variable produced by creep fatigue load presents a linear downward trend. Considering the changes in the mechanical properties of the anchored rock mass under creep fatigue loading, the creep fatigue model of anchored rock masses is established by introducing a function of the fatigue shear modulus, and the accuracy and applicability of the model are verified by laboratory creep fatigue test data. The model provides a theoretical basis for the study of anchored rock mass support under low-frequency earthquakes or blasting loads.

Comparative analysis of spatial locations of defects detected in rock mass by different methods

2021 ◽  
pp. 21-25
Author(s):  
V. P. Marysyuk ◽  
M. P. Sergunin ◽  
S. V. Kuzmin ◽  
I. S. Nevolin
Keyword(s):  
Rock Mass ◽  
Comparative Analysis ◽  
Spatial Locations

Integrated geophysical and geotechnical monitoring for multiscale rock mass damaging investigation at the Acuto Field-Lab (Italy)

2021 ◽  
Author(s):  
Guglielmo Grechi ◽  
Danilo D'Angiò ◽  
Matteo Fiorucci ◽  
Roberto Iannucci ◽  
Luca Lenti ◽  
...  
Keyword(s):  
Rock Mass ◽  
Monitoring System ◽  
Thermal Stresses ◽  
Central Italy ◽  
Jointed Rock ◽  
Failure Behavior ◽  
Rock Masses ◽  
Geotechnical Monitoring ◽  
Strain Monitoring

<p>Rock mass damaging has become a topic of great interest in the engineering-geology research community during the last decades as it can significantly influence slopes stability. In this sense, the study of mechanics and dynamics of jointed rock masses represents a challenge because it will allow to better understand how external continuous and transient stressors can influence the short- to long-term stability controlling their pre-failure behavior. Consequently, the detection of permanent changes in physical and mechanical parameters, due to periodic or transient stressors, is an important target to mitigate the related geological risk as it can potentially lead rock masses to failure, especially when infrastructures and natural or cultural heritages are exposed elements. In this framework, the Acuto field laboratory (Central Italy) has been designed and implemented in 2016 within an abandoned quarry by employing an integrated geotechnical and geophysical monitoring system, with the aim of investigating how natural and anthropic conditioning factors could lead fractured rock masses to failure. The integrated monitoring system, which is installed on a potentially unstable 20-m<sup>3</sup> jointed rock block, is composed of several strain devices (i.e., strain gauges -SG- and jointmeters -JM-), one fully equipped weather station, one rock thermometer, eight high-sensitivity microseismic uniaxial accelerometers and optical and InfraRed Thermal cameras. The acquisition of long-term monitoring time-series, coupling multimethodological approaches, allowed to establish cause-to-effect relationships among different environmental stressors and induced strain effects, highlighting the continuous action of thermal stresses on rock mass deformations both at the daily and seasonal timescales. In fact, while the analysis of thermal and strain monitoring data allowed to characterize the cyclic contraction and relaxation response of major rock fractures and microcracks to temperature fluctuations, the microseismic monitoring array was able to detect during thermal transient (i.e., freezing conditions) the occurrence of microseismic emissions potentially related to the genesis or progressive growth of pre-existing cracks.</p><p>Starting from 2018, experimental activities at the Acuto field lab are supported by the “Dipartimento di Eccellenza” project of the Italian Ministry of Education Universities and Research funds attributed to the Department of Earth Sciences of the University of Rome “Sapienza”.  In this framework, the Acuto filed laboratory will undergo a structural upgrade that will be aimed at the investigation of two new sectors of the abandoned quarry. These new sectors will be instrumented with innovative thermal profiles probe, fiber Brag grating sensors and traditional SG and JM for detailed stress-strain monitoring, acoustic emission sensors and high-frequency and low-frequency geophones for ambient seismic noise monitoring and microseismic events detection as well as accelerometers for evaluating the rock mass response in the case of seismic shaking. The main goal of such an improvement will be both technical and methodological, and will shed light on the application of integrated geophysical and geotechnical monitoring approaches in investigating the multiscale rock mass damaging process as well as the detection of rock mass failure precursors by using non-conventional combinations and configurations of geotechnical and broad-band geophysical devices.</p>

scholarly journals Key Factors Affecting the Deformation and Failure of Surrounding Rock Masses in Large-Scale Underground Powerhouses

2020 ◽  
Vol 2020 ◽  
pp. 1-20
Author(s):  
Meng Wang ◽  
Jia-wen Zhou ◽  
An-chi Shi ◽  
Jin-qi Han ◽  
Hai-bo Li
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Surrounding Rock ◽  
Rock Masses ◽  
Affecting Factors ◽  
Key Factors ◽  
Underground Powerhouse ◽  
Deformation And Failure ◽  
Factors Affecting ◽  
Geological Conditions

The stability of the surrounding rock masses of underground powerhouses is always emphasized during the construction period. With the general trends toward large-scale, complex geological conditions and the rapid construction progress of underground powerhouses, deformation and failure issues of the surrounding rock mass can emerge, putting the safety of construction and operation in jeopardy and causing enormous economic loss. To solve these problems, an understanding of the origins and key affecting factors is required. Based on domestic large-scale underground powerhouse cases in the past two decades, key factors affecting the deformation and failure of the surrounding rock mass are summarized in this paper. Among these factors, the two most fundamental factors are the rock mass properties and in situ stress, which impart tremendous impacts on surrounding rock mass stability in a number of cases. Excavation is a prerequisite of surrounding rock mass failure and support that is classified as part of the construction process and plays a pivotal role in preventing and arresting deformation and failure. Additionally, the layout and structure of the powerhouse are consequential. The interrelation and interaction of these factors are discussed at the end of this paper. The results can hopefully advance the understanding of the deformation and failure of surrounding rock masses and provide a reference for design and construction with respect to hydroelectric underground powerhouses.

scholarly journals The ARMR Classification System and the Modified Hoek-Brown Failure Criterion Compared to Directional Shear Strength Models for Anisotropic Rock Masses

2019 ◽  
Author(s):  
Neil Bar ◽  
Charalampos Saroglou
Keyword(s):  
Shear Strength ◽  
Rock Mass ◽  
Failure Criterion ◽  
Classification System ◽  
Failure Criteria ◽  
Rock Masses ◽  
Anisotropic Rock ◽  
Anisotropic Rock Mass ◽  
Degree Of Anisotropy ◽  
Strength Models

The anisotropic rock mass rating classification system, ARMR, has been developed in conjunction with the Modified Hoek-Brown failure to deal with varying shear strength with respect to the orientation and degree of anisotropy within an anisotropic rock mass. Conventionally, ubiquitous-joint or directional shear strength models have assumed a general rock mass strength, typically estimated using the Hoek-Brown failure criterion, and applied a directional weakness in a given orientation depending on the anisotropic nature of the rock mass. Shear strength of the directional weakness is typically estimated using the Barton-Bandis failure criterion, or on occasion, the Mohr-Coulomb failure criteria. Directional shear strength models such as these often formed the basis of continuum models for slopes and underground excavations in anisotropic rock masses. This paper compares ARMR and the Modified Hoek-Brown failure criterion to the conventional directional shear strength models using a case study from Western Australia.

Sign in / Sign up

Export Citation Format

Share Document