Numerical experiment on mass transfer in binary mixtures, using the mathematical model of convective diffusion for the turbulent flow of gas in a tube

1974 ◽  
Vol 27 (5) ◽  
pp. 1321-1325 ◽  
Author(s):  
E. N. Konstantinov ◽  
V. A. Kuznechikov
Water ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 1888
Author(s):  
Óscar E. Coronado-Hernández ◽  
Ivan Derpich ◽  
Vicente S. Fuertes-Miquel ◽  
Jairo R. Coronado-Hernández ◽  
Gustavo Gatica

The study of draining processes without admitting air has been conducted using only steady friction formulations in the implementation of governing equations. However, this hydraulic event involves transitions from laminar to turbulent flow, and vice versa, because of the changes in water velocity. In this sense, this research improves the current mathematical model considering unsteady friction models. An experimental facility composed by a 4.36 m long methacrylate pipe was configured, and measurements of air pocket pressure oscillations were recorded. The mathematical model was performed using steady and unsteady friction models. Comparisons between measured and computed air pocket pressure patterns indicated that unsteady friction models slightly improve the results compared to steady friction models.


2020 ◽  
Vol 5 (3) ◽  
pp. 49-61
Author(s):  
Andrii Cheilytko ◽  
◽  
Sergii Ilin

The development and application of new, more efficient dust collection units that will help reduce emissions and conserve some very valuable resources for production is an important area of research. With the growth of innovation in technological enterprises, the number of harmful emissions into the atmosphere is growing. Thus, the ecological condition of the environment deteriorates. The basic analytical dependences which are necessary for construction of a technique of carrying out experiments and calculations of dust catching for concrete working conditions are developed. Methods of calculating cyclones as vortex devices and research of cyclone operation for air purification from dust were investigated. On the basis of the used basic theoretical positions of heat and mass transfer and thermodynamics at carrying out analytical researches the mathematical model was offered. Calculations of new designs of modern cyclones to obtain their geometric dimensions, resistance and dust capture efficiency were presented. Modern cyclones are designed to more effectively remove dust from the air during various types of work.


Author(s):  
Olha Chernukha ◽  
Yurii Bilushchak

On the basis of mathematical model of convectivediffusion in a three-layered filter it is formulated a contactinitial-boundary value problem for description of mass transferof pollution accompanying the sorption processes. It is proposedthe algorithm for establishing the estimation of values of soughtfunction (concentration of pollution) at the lower boundary of thefilter on the basis of the interpolation of experimental data. It istaken into account that the right end of the interpolation segmentis unknown. It is determined the exact solutions of contact-initialboundaryvalue problems of mass transfer with provision forboth diffusive and convective mechanisms of transfer as well assorption processes, which is based on integral transformationsover space variables in the contacting regions. Is it designedsoftware and established regularities of convective diffusionprocess in the three-layered filter.


2014 ◽  
Vol 621 ◽  
pp. 311-316
Author(s):  
Tian Yang Zhao ◽  
Dan Jiang ◽  
Song Yu ◽  
Jie Wang ◽  
Ping Yang

Based on the continuity equation and the motion equation of fluid dynamics, a mathematical model of high pressure transients in water hydraulic pipeline is presented. In the model, the friction item is consist of steady friction item and dynamic friction item, using the Darcy-Weisbach equation to solve steady viscous friction item and using four exponential terms instead of weighting function to solve dynamic friction item. By finite difference method accompanied with Matlab/Simulink, an example of high pressure turbulent flow in water hydraulic pipeline is configured so as to simulate the dynamic characteristics of pressure transients. The comparison between the observed result and the simulation result shows the mathematical model of high pressure transients in water hydraulic pipeline with turbulent flow is reasonable.


2016 ◽  
Vol 20 (2) ◽  
pp. 81-89
Author(s):  
Monika Gwadera

AbstractThe aim of this paper is to present the adsorption chillers technology. The operating principle of these systems, the adsorbent-adsorbate pairs that are frequently applied and the enhancement techniques that allow improvement of their efficiency are presented. Analysis of the mass transfer and principles of mathematical modeling of such systems are also discussed. In the further part of the text, the results of experimental studies and comparison of these results with calculations based on the mathematical model of adsorption were presented.


2014 ◽  
Vol 989-994 ◽  
pp. 3100-3104
Author(s):  
Rui Hang Zhang ◽  
Zi Ye Wang ◽  
Run Ping Niu

TA mathematical model describing heat and mass transfer performance of packed-type parallel flow dehumidifier was set up. The numerical solution of differential equations was derived. Taking the heat and mass transfer coefficients obtained by experiments as the input parameters of the model, the impact of solution inlet parameters on outlet parameter of air was described. The simulation results indicated that the mathematical model could be used to predict the performance of liquid dehumidification. The results showed that the mathematical model can be of great value in the design and improvement of dehumidifier.


1999 ◽  
Vol 64 (5-6) ◽  
pp. 317-340 ◽  
Author(s):  
Miodrag Maksimovic ◽  
Konstantin Popov

1. Introduction 2. Mass transfer in the steady state periodic condition 2.1. Reversing current 2.2. Pulsating current 2.3. Alternating current superimposed on direct current 3. The influence of the charge and discharge of the electrical double layer 4. The validity of the mathematical model 4.1. Reversing current in the millisecond range 4.2. Reversing current in the second range 4.3. Pulsating current 4.4. Pulsating overpotential 5. Conclusion


2018 ◽  
Vol 82 (1) ◽  
Author(s):  
Наталья Николаевна Сороковая ◽  
Дмитрий Николаевич Коринчук

Разработана математическая модель и численный метод расчета динамики тепломассопереноса, фазовых превращений и усадки при сушке коллоидных капиллярно-пористых тел цилиндрической формы в условиях равномерного обдува теплоносителем. Математическая модель строилась на базе дифференциального уравнения переноса субстанции (энергии, массы, импульса) в деформируемых системах. Проведены экспериментальные исследования кинетики обезвоживания частиц энергетической вербы в потоке воздуха с целью верификации математической модели. Обоснована возможность ее использования для расчета совместных процессов сушки и начального этапа термического разложения биомассы. С использованием ранее полученных данных по значениям энергии активации Аэф(Т) для различных видов биомассы проведено математическое моделирование динамики и кинетики высокотемпературной сушки в потоке дымовых газов энергетической вербы, которая сопровождается термодеструкцией гемиоцеллюлозы. Результаты численных экспериментов свидетельствуют об адекватности предложенного подхода, эффективности математической модели и метода ее реализации. На их основе возможно проводить исследование динамики тепломассопереноса при сушке частиц различных видов измельченной биомассы; определение температуры начала и окончания первой стадии термического разложения; момента достижения равновесного влагосодержания в зависимости от свойств материала и сушильного агента. Эти данные позволяют выбирать оптимальные с точки зрения сохранения энергии и качества высушиваемого продукта  режимные параметры процесса.         A mathematical model and a numerical method for calculating the dynamics of heat and mass transfer, phase transformations and shrinkage during the drying of colloidal capillary-porous cylindrical bodies under conditions of equitable winding by a coolant are developed. The mathematical model was based on the differential equation of substance (energy, mass, impulse) transfer in deformable systems. It includes the equations diffusion-filtration transfer of energy for the system as a whole, and the mass transfer of the liquid, vapor and air phases in the pores of the body. Expressions for the intensity of evaporation of a liquid, capillary pressure, and the diffusion coefficients are presented. The relative volume strain was found by means of an analytical solution of the thermoconcentration deformation equation. Based on the explicit three-layer counting difference scheme and the procedure splitting of algorithm  by physical factors, a numerical method for realizing this mathematical model is developed.Experimental studies of the kinetics of dehydration of energy willow particles in the airflow were carried out to verify the mathematical model. Its applicability for calculating combined processes of drying and of the initial stage of thermal decomposition of biomass is substantiated. Using the previously obtained data on the activation energy values for various types of biomass, a mathematical simulation of the dynamics and kinetics of high-temperature drying in the flue gas flow of energy willow was carried out, which is accompanied by thermal destruction of hemiocellulose. The results of numerical experiments indicate the adequacy of the proposed approach, the effectiveness of the mathematical model and the method of its implementation. On their basis, it is possible to study the dynamics of heat and mass transfer when drying particles of different types of ground biomass; determination of the temperature of the beginning and ending of the first stage of thermal decomposition; the moment when the equilibrium moisture content is reached, depending on the properties of the material and the drying agent. These data allow choosing the process parameters that are optimal in terms of energy saving and quality of the dried product.


2019 ◽  
Vol 23 (1) ◽  
pp. 23-31 ◽  
Author(s):  
Mounir Asli ◽  
Frank Brachelet ◽  
Alexis Chauchois ◽  
Emmanuel Antczak ◽  
Didier Defer

In this paper, the coupled heat and mass transfer within porous media has been studies. First, the studied materials have been characterized experimentally and than evaluated their thermal properties, namely thermal conductivity and specific heat in different states (dry-wet). The hygroscopic properties, namely water vapour permeability, water vapour sorption. At second time, we present and validate the mathematical model describing heat and mass transfer within bio-based materials, by the confrontation with the experimental results. The materials properties obtained from the characterisation part are used as model?s input parameters. Moreover, a test facility is mounted in the laboratory in order to compare the numerical and experimental data. The founded results show a good concordance between the simulated and measured data. According to this results the mathematical model of Philip and de Vries gives a good prediction of hygrothermal behaviour of bio-based material. This model will allow us to save money and time of the experimental part in the future.


Author(s):  
Dmitriy V. Guzei ◽  
Andrey V. Minakov ◽  
Vasiliy I. Panteleev ◽  
Maksim I. Pryazhnikov ◽  
Dmitriy V. Platonov ◽  
...  

The mathematical model of heat and mass transfer processes in the combustion chamber of diesel generator units with valve inductor generators has been developed. The mathematical model takes into account the actual geometry of the combustion chamber and the operating conditions of the diesel engine. A study of the main characteristics of a diesel generator in a wide range of modes of operation has been carried out. In addition to energy characteristics, environmental parameters have been considered


Sign in / Sign up

Export Citation Format

Share Document