Some properties of 2-5A binding/nucleolytic activities in gel filtered rabbit reticulocyte lysates

1985 ◽  
Vol 5 (12) ◽  
pp. 1041-1051 ◽  
Author(s):  
Joseph M. Wu ◽  
Stanley J. Wertheimer ◽  
Behruz Eslami ◽  
Joanne C. Figuereido ◽  
Biswendu B. Goswami

Rabbit reticulocyte lysates, gel filtered on Sephadex G-25 with or without ATP (or its analogs), were preincubated at 37°C and their subsequent binding to p3A4,3′-[32P]pCp was studied. Lysates filtered without ATP or in the presence of 0.1 mM 8-bromo-ATP, 1,N6-etheno-ATP, or ITP showed a time-dependent decrease in binding activity. This decrease was completely prevented when lysates were filtered with 0.1 mM ATP, 2′-deoxy-ATP, β-γ-methylene-ATP, or ATP-γ-S. The stability of binding provided by ATP or 2′-deoxy-ATP analogs corresponds to a more active 2–5A dependent endonucleolytic (RNAase L) activity based on studies using [3H] viral mRNA. Chromatography on heparin-agarose showed that ATP-supplemented gel-filtered reticulocyte lysates had a different p3A4,3′-[32P]pCp binding activity elution-profile than lysates gel-filtered in the absence of ATP. Covalent cross-linking of periodate-oxidized p3A4,3′-[32P]pC to gelfiltered lysates, preincubated at 0°C or 37°C for 30 min, showed the following results: (1) all lysates gave a major cross-linking of the radioactive ligand to an 80 000 dalton polypeptide, regardless of the temperature of preincubation, (2) Iysates gel-filtered without ATP, with 0.1 mM ITP, or β-γ-methylene-ATP, showed a significant reduction in the cross-linking of the 80 000 dalton protein, after preincubation at 37°C for 30 min. This decrease was accompanied by an increase in the labeling of two smaller polypeptides.

NANO ◽  
2021 ◽  
pp. 2150008
Author(s):  
Hongwei Liu ◽  
Jinhua Liu ◽  
Jun Li ◽  
Zhanchao Liu ◽  
Weifu Wu ◽  
...  

An excellent novel laminar and hierarchical polyethyleneimine cross-linked graphene oxide/titanium dioxide (GO–TiO2–PEI) membrane was successfully prepared by vacuum filtration technology using polyethyleneimine (PEI) as the cross-linking agent and a GO–TiO2 nanocomposite as the substrate. The resultant membrane (GO–TiO2–PEI) displayed a favorable antifouling performance with bovine serum albumin (BSA) and showed good hydrophilicity and wettability, with a static water contact angle of 13.2∘. The stability of the GO–TiO2–PEI membrane in aqueous solution obviously improved with the cross-linking of PEI compared with that of the GO and GO–TiO2 membranes. The GO–TiO2–PEI membrane also exhibited a satisfactory water flux of 48.6[Formula: see text]L m[Formula: see text] h[Formula: see text] bar[Formula: see text]. The GO–TiO2–PEI membrane exhibited a good performance for effectively separating different dyes including methylene blue (MB), rhodamine B (RB), methyl orange (MO), sunset yellow (SY), new coccine (NC) and amaranth. All the above results suggested that the GO–TiO2–PEI membrane could be used as an excellent stable hydrophilic membrane for efficiently separating dyes from aqueous solution.


2021 ◽  
Vol 25 (1) ◽  
pp. 49-52
Author(s):  
Aleksandra Kłos-Witkowska ◽  
Vasyl Martsenyuk

In this study, the stability of the receptor layer component of a biosensor after addition of gold nanoparticles was investigated. Accelerated conformational changes under the influence of Au were demonstrated. The relative percentage changes over time between the pure protein and the Au doped protein were calculated. It was shown that these changes are greater with time and exceed 20 % in the last days of the experiment.


2010 ◽  
Vol 76 ◽  
pp. 133-138 ◽  
Author(s):  
Giulio D. Guerra ◽  
Caterina Cristallini ◽  
Elisabetta Rosellini ◽  
Niccoletta Barbani

Composites between hydroxyapatite (HA) and collagen (Col) may be used to make bioresorbable scaffolds for bone reconstruction. A suspension of micro-particles (average diameter ≅ 30 µm) of HA annealed at 1100°C in Col solution (80:20 HA to Col weight ratio) was manufactured in films by casting, and then some films were cross-linked by glutaraldehyde vapours. Cross-linked sponges were obtained by treating the suspension with transglutaminase, and by lyophilizing the so obtained gel. Characterization by scanning electron microscopy, water sorption test, Col release in water, thermogravimetric analysis and differential scanning calorimetry shows that the cross-linking enhances the stability of the composite. Conversely, neither the interactions between HA and Col, detected by spotlight FT-IR, nor the degradation by collagenase, which is a requirement for the bioresorbibility, are affected by the cross-linking.


2009 ◽  
Vol 1234 ◽  
Author(s):  
Jack F. Douglas

AbstractSimplified models of flexible chain and stiff fiber networks are introduced to address how the network elasticity becomes modified when the cross-linking is thermoreversible in nature and changes in the stability of the network with deformation. These idealized models apparently able to capture many aspects of the elastic properties of real networks.


Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6022
Author(s):  
Jakub Smoleń ◽  
Piotr Olesik ◽  
Paweł Gradoń ◽  
Mateusz Chudy ◽  
Bogusław Mendala ◽  
...  

In this paper, we investigated the thermodynamics of the resin curing process, when it was a part of composition with graphite powder and cut carbon fibers, to precisely determine the time and temperature of gelation. The material for the research is a set of commercial epoxy resins with a gelation time not exceeding 100 min. The curing process was characterized for the neat resins and for resins with 10% by weight of flake graphite and cut carbon fibers. The results recorded in the analysis of temperature derivative (ATD) method unequivocally showed that the largest first derivative registered during the test is the gel point of the resin. The innovative approach to measuring the gelation time of resins facilitates the measurements while ensuring the stability of the curing process compared to the normative tests that introduce mechanical interaction. In addition, it was found during the research that the introduction of 10% by weight of carbon particles in the form of graphite and cut carbon fibers rather shortens the gelation time and lowers the temperature peak due to the effective absorption and storage of heat from the cross-linking system. The inhibiting (or accelerating) action of fillers is probably dependent on chemical activity of the cross-linking system.


2011 ◽  
Vol 2011 ◽  
pp. 1-10 ◽  
Author(s):  
Alexandre Arsenault ◽  
Hubert Cabana ◽  
J. Peter Jones

Laccase from Coriolopsis Polyzona was insolubilized as cross-linked enzyme aggregates (CLEAs) for the first time with chitosan as the cross-linking agent. Concentrations between 0.01 and 1.867 g/L of chitosan were used and between 0.05 and 600 mM of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride. The laccase was precipitated using ammonium sulphate and cross-linked simultaneously. Specific activity and thermal stability of these biocatalysts were measured. Activities of up to 737 U/g were obtained when 2,2-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) was used as a substrate. Moreover, the stability of these biocatalysts was improved with regards to thermal degradation compared to free laccase when exposed to denaturing conditions of high temperature and low pH. The CLEAs stability against chemical denaturants was also tested but no significant improvement was detected. The total amount of ABTS to be oxidized during thermal degradation by CLEAs and free laccase was calculated and the insolubilized enzymes were reported to oxidize more substrate than free laccase. The formation conditions were analyzed by response surface methodology in order to determine an optimal environment for the production of efficient laccase-based CLEAs using chitosan as the cross-linking agent. After 24 hours of formation at pH 3 and at 4°C without agitation, the CLEAs exhibit the best specific activity.


2005 ◽  
Vol 5 (1) ◽  
pp. 3-50 ◽  
Author(s):  
Alexei A. Gulin

AbstractA review of the stability theory of symmetrizable time-dependent difference schemes is represented. The notion of the operator-difference scheme is introduced and general ideas about stability in the sense of the initial data and in the sense of the right hand side are formulated. Further, the so-called symmetrizable difference schemes are considered in detail for which we manage to formulate the unimprovable necessary and su±cient conditions of stability in the sense of the initial data. The schemes with variable weight multipliers are a typical representative of symmetrizable difference schemes. For such schemes a numerical algorithm is proposed and realized for constructing stability boundaries.


Sign in / Sign up

Export Citation Format

Share Document