The effect of the interaction of tree slenderness and relative height with ring width on wood density in Abies balsamea and Picea glauca

2016 ◽  
Vol 51 (1) ◽  
pp. 175-194 ◽  
Author(s):  
Arthur Groot ◽  
Francesco Cortini
2002 ◽  
Vol 32 (12) ◽  
pp. 2116-2127 ◽  
Author(s):  
Milosh Ivkovich ◽  
Gene Namkoong ◽  
Mathew Koshy

Quantitative genetic variation in growth, latewood percentage, and wood density was investigated for British Columbia's interior spruce (the common name for white spruce, Picea glauca (Moench) Voss; Engelmann spruce, Picea engelmanni Parry ex Engelm.; and their hybrids). The study included 160 half-sib families from the East Kootenay and Prince George regions. At the time of sampling, progeny tests for those two regions were 20 and 22 years old, respectively. Univariate and multivariate restricted maximum likelihood (REML) estimates of genetic parameters were obtained. Estimates of genetic variances and heritabilities differed greatly across planting sites for the examined traits, especially after transplantation between the regions. Significant negative genetic correlation between overall growth and wood density was found for the East Kootenay progenies, while negative but nonsignificant genetic correlation between these traits was found for the Prince George progenies. Generally, there was no significant decrease in heritability for ring width and latewood percentage in successive growth rings. A general age trend for genetic correlation between those traits was not apparent, except that the correlation remained negative during the observed period. Our results show that it is not possible to select certain families as superior based on 1-year results because of the family by growing season interactions. Nevertheless, genetic age–age correlations for cumulative increments were high, having a decreasing trend with increasing difference in age.


2004 ◽  
Vol 34 (6) ◽  
pp. 1311-1318 ◽  
Author(s):  
S Y Zhang ◽  
Qibin Yu ◽  
Jean Beaulieu

This study investigated the genetic variation in veneer quality of white spruce (Picea glauca (Moench) Voss) and its correlation with tree growth and wood density. A total of 270 sample trees from 35 families were harvested from 36-year-old provenance-progeny trials at two sites through a thinning operation. A 36-cm long bolt was collected from each sample tree at an 8-foot (or 2.45 m) height for this veneer quality study. The results indicate that conversion of fast-grown white spruce into veneer and plywood may present some problems. Low wood density, numerous knots, and possibly a high proportion of juvenile wood appear to be major factors contributing to low veneer stress grading, resulting in a production of low-quality veneer. This study also showed that the environmental factors at the two sites played an important role in determining veneer quality and tree radial growth. The narrow-sense heritability for veneer density, veneer modulus of elasticity, and veneer roughness were 0.62, 0.13, and 0.14, respectively. The results revealed considerable phenotypic variation and relatively high additive genetic variation in the veneer modulus of elasticity. The phenotypic and genetic correlations between ring width and veneer density or veneer modulus of elasticity were negative. A positive phenotypic and genetic correlation was found between veneer density and veneer modulus of elasticity. This suggests that selection for tree volume growth in white spruce would lead to a decrease in wood density and veneer stiffness.


2013 ◽  
Vol 133 (1) ◽  
pp. 31-39 ◽  
Author(s):  
Fatima Tavares ◽  
José L. Louzada ◽  
Helena Pereira

The Holocene ◽  
2019 ◽  
Vol 29 (11) ◽  
pp. 1817-1830 ◽  
Author(s):  
R Wilson ◽  
K Anchukaitis ◽  
L Andreu-Hayles ◽  
E Cook ◽  
R D’Arrigo ◽  
...  

In north-western North America, the so-called divergence problem (DP) is expressed in tree ring width (RW) as an unstable temperature signal in recent decades. Maximum latewood density (MXD), from the same region, shows minimal evidence of DP. While MXD is a superior proxy for summer temperatures, there are very few long MXD records from North America. Latewood blue intensity (LWB) measures similar wood properties as MXD, expresses a similar climate response, is much cheaper to generate and thereby could provide the means to profoundly expand the extant network of temperature sensitive tree-ring (TR) chronologies in North America. In this study, LWB is measured from 17 white spruce sites ( Picea glauca) in south-western Yukon to test whether LWB is immune to the temporal calibration instabilities observed in RW. A number of detrending methodologies are examined. The strongest calibration results for both RW and LWB are consistently returned using age-dependent spline (ADS) detrending within the signal-free (SF) framework. RW data calibrate best with June–July maximum temperatures (Tmax), explaining up to 28% variance, but all models fail validation and residual analysis. In comparison, LWB calibrates strongly (explaining 43–51% of May–August Tmax) and validates well. The reconstruction extends to 1337 CE, but uncertainties increase substantially before the early 17th century because of low replication. RW-, MXD- and LWB-based summer temperature reconstructions from the Gulf of Alaska, the Wrangell Mountains and Northern Alaska display good agreement at multi-decadal and higher frequencies, but the Yukon LWB reconstruction appears potentially limited in its expression of centennial-scale variation. While LWB improves dendroclimatic calibration, future work must focus on suitably preserved sub-fossil material to increase replication prior to 1650 CE.


2012 ◽  
Vol 42 (3) ◽  
pp. 561-573 ◽  
Author(s):  
Glenn Patrick Juday ◽  
Claire Alix

This paper calibrates climate controls over radial growth of floodplain white spruce ( Picea glauca (Moench) Voss) and examines whether growth in these populations responds similarly to climate as upland trees in Interior Alaska. Floodplain white spruce trees hold previously unrecognized potential for long-term climate reconstruction because they are the source of driftwood that becomes frozen in coastal deposits, where archeological timbers and beach logs represent well-preserved datable material. We compared ring width chronologies for 135 trees in six stands on the Yukon Flats and Tanana River with temperature and precipitation at Fairbanks from 1912–2001. Our sample contains a stable common signal representing a strong negative relationship between summer temperature and tree growth. We developed a floodplain temperature index (FPTI), which explains half of the variability of the composite chronology, and a supplemental precipitation index (SPI) based on correlation of monthly precipitation with the residual of the temperature-based prediction of growth. We then combined FPTI and SPI into a climate favorability index (CFI) in which above-normal precipitation partially compensates for temperature-induced drought reduction of growth and vice versa. CFI and growth have been particularly low since 1969. Our results provide a basis for building longer chronologies based on archeological wood and for projecting future growth.


2004 ◽  
Vol 34 (9) ◽  
pp. 1938-1945 ◽  
Author(s):  
Isobel Waters ◽  
Steven W Kembel ◽  
Jean-François Gingras ◽  
Jennifer M Shay

This study compares the effects of full-tree versus cut-to-length forest harvesting methods on tree regeneration in jack pine (Pinus banksiana Lamb.), mixedwood (Picea glauca (Moench) Voss – Populus tremuloides Michx. – Abies balsamea (L.) Mill.), and black spruce (Picea mariana (Mill.) BSP) sites in southeastern Manitoba, Canada. We surveyed tree regeneration densities, disturbance characteristics, and understorey vegetation in replicated control and harvested plots in each site type preharvest (1993) and 1 and 3 years postharvest (1994, 1996). In jack pine sites, the full-tree harvest method promoted regeneration of Pinus banksiana through increased disturbance of soil and the moss layer, and decreased slash deposition relative to the cut-to-length method. Conversely, in mixedwood sites the cut-to-length method resulted in less damage to advance regeneration and proved better at promoting postharvest regeneration of Abies balsamea and Picea glauca relative to the full-tree method. In black spruce sites, there were few differences in the impact of the two harvesting methods on regeneration of Picea mariana, which increased in frequency and density after both types of harvesting.


1998 ◽  
Vol 28 (1) ◽  
pp. 37-43 ◽  
Author(s):  
P Rochon ◽  
D Paré ◽  
C Messier

An improved model for estimating nutrient contents of the commercial portion of tree boles was developed for four boreal tree species (Populus tremuloides Michx., Betula papyrifera Marsh., Picea glauca (Moench) Voss, and Abies balsamea (L.) Mill.). This model considers the spatial pattern of variation of nutrient concentrations inside the bole and its relationships with tree size. For all species-nutrient combinations, no significant pattern was found for vertical variations in nutrient concentrations, while two types of nonlinear models, using distance from the tree periphery as the independent variable, fit the pattern of horizontal (or radial) variations. These patterns of variability were used to estimate the global nutrient concentration of the bole by using mathematical integration. The values obtained with this method were generally lower, especially for large stems, than values obtained with traditional methods that do not consider the variability of nutrient concentrations inside the bole. This improved model would permit better estimates of the amounts of nutrients lost in biomass upon forest harvesting, as well as internal cycling of nutrients within the bole.


Sign in / Sign up

Export Citation Format

Share Document