Comparison of pyrolyzed lignin before and after milled wood lignin purification of Norway spruce with increasing steam explosion

2019 ◽  
Vol 53 (3) ◽  
pp. 601-618
Author(s):  
Ida Aarum ◽  
Anders Solli ◽  
Hördur Gunnarsson ◽  
Dayanand Kalyani ◽  
Hanne Devle ◽  
...  
Holzforschung ◽  
2000 ◽  
Vol 54 (5) ◽  
pp. 449-456 ◽  
Author(s):  
Finn Englund ◽  
Ralph M. Nussbaum

Summary Scots pine (Pinus silvestris) and Norway spruce (Picea abies) were dried in a laboratory kiln, using conventional schedules with temperatures up to 60°C as well as schedules reaching 110°C. The losses of terpenes, which completely dominate the fugitive emissions from kiln drying of softwoods, were estimated by extraction of pooled subsamples from each batch, before and after drying. The original contents of terpenes were found to be in the ranges of 0.4–0.5% in pine sapwood, 0.8–1.1% in pine heartwood, and 0.02–0.08% in spruce, all calculated relative to the dry weight of the wood. The emissions from pine corresponded to 25–50% of the original content and those from spruce to 10–50%. High temperature drying in the laboratory was accompanied by larger losses, but this tendency was not found in the full-scale drying of spruce. No consistent difference was found between timber from the north of Sweden and from the south. Sampling of the vent exhaust fumes did not give results of sufficient reliability to confirm the extraction analyses.


2021 ◽  
Author(s):  
Denghui Tong ◽  
Peng Zhan ◽  
Weifeng Zhang ◽  
Yongcai Zhou ◽  
Yilei Huang ◽  
...  

Abstract Pretreatment is an indispensable process in lignocellulosic bioethanol production. In this work, a surfactant agent JFC was introduced into the dilute phosphoric acid plus steam explosion pretreatment scheme for fermentable sugar production using poplar as substrate. Four crucial factors (phosphoric acid concentration, surfactant concentration, pressure, and residence time) affecting the pretreatment efficiency were optimized using the single factor tests. The optimal parameters obtained were as follows: 1:2.5 solid/liquid rate, 2 h pre-soaking time, 1.5 %(v/v) JFC-M + 2.0 wt% phosphoric acid, 2.0 MPa pressure, and 120 s residence time, resulting in a maximum cellulose recovery rate of 86.33 % and enzymatic saccharification rate of 84.62 %, which was 38.97 % higher than that of control. The morphological and structural characteristics of samples before and after pretreatment, were characterized by the scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) method. The addition of JFC-M was of a notable influence in overcoming biomass recalcitrance and boosting cellulose digestion, showing great application potentials in biomass conversion process.


2016 ◽  
Vol 62 (4) ◽  
pp. 169-177 ◽  
Author(s):  
Sigrid Netherer ◽  
Magdalena Ehn ◽  
Emma Blackwell ◽  
Thomas Kirisits

Abstract We performed an inoculation experiment using the blue-stain fungus Endoconidiophora polonica at the Rosalia Roof study site, which was set up to study drought effects on Norway spruce susceptibility to attacks by the European spruce bark beetle Ips typographus. Tree resistance parameters such as resin flow rate and extent of hypersensitive wound reaction in the phloem were investigated prior to and after fungal infection. Sample trees with different drought treatments (trees fully covered or semi-covered by roofs, control trees) were inoculated with E. polonica in July 2014. In order to check for areas of phloem necrosis, the outer bark around the inoculation holes was scratched off 6 weeks later. We recorded the amount of resin exudation within 12 hours overnight in August and September 2013 and 2014. Although wound reaction zones did not differ in size between tree collectives of the various treatments, fully covered trees tended to exhibit larger necrotic areas compared to control trees. The least water supplied trees showed lowest resin flow rates prior to fungal inoculation, but were the only group to show significantly enhanced resin flow five weeks after the evaluation of defence reactions. Our results agree with earlier findings that wounding and few fungal inoculations can increase tree resistance in the medium term given not too severe water stress. Further investigations will clarify how water stress affects the availability of non-structural carbohydrates for secondary metabolism, when depletion of resources eventually occurs, and at which point trees are most susceptible to bark beetle attack.


2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Anna Šutka ◽  
Silvija Kukle ◽  
Janis Gravitis ◽  
Laima Grave

Microfibrillated cellulose was extracted from hemp fibres using steam explosion pretreatment and high-intensity ultrasonic treatment (HIUS). The acquired results after steam explosion treatment and water and alkali treatments are discussed and interpreted by Fourier transform infrared spectroscopy (FTIR). Scanning electron microscopy (SEM) was used to examine the microstructure of hemp fibres before and after each treatment. A fibre size analyser was used to analyse the dimensions of the untreated and treated cellulose fibrils. SEM observations show that the sizes of the different treated fibrils have a diameter range of several micrometres, but after HIUS treatment fibres are separate from microfibrils, nanofibres, and their agglomerates.


BioResources ◽  
2012 ◽  
Vol 7 (2) ◽  
Author(s):  
Kerstin Jedvert ◽  
Anna Saltberg ◽  
Mikael E. Lindström ◽  
Hans Theliander

2012 ◽  
Vol 58 (No. 7) ◽  
pp. 308-313 ◽  
Author(s):  
S. Małek ◽  
K. Krakowian

The Norway spruce dieback which occurred in the Western Carpathians is of interest to scientists in many fields. The goal of this research was to determine its effect on spring water chemistry. Due to environmental factors such as: high precipitation &ndash; up to 1,400 mm&middot;year<sup>&ndash;1</sup> while the average for Poland is 600 mm&middot;year<sup>&ndash;1</sup>; kind of bedrock (the area is built of Godula Sandstone) which causes shallow water circulation so that springs are considered as shallow supplied, it was expected that the plant cover changes might affect spring water chemistry. Such observations were partially confirmed by Astel et al. (2008), when differences between types of forest stands were found. Those results showed that the presence of mixed stands caused an increase in pH values and an increase in calcium and magnesium concentrations compared to the spring waters of Norway spruce monocultures growing on the same geological bedrock. Currently another point of view was a possibility to analyse what was before and after deforestation.<br />The research was carried out in 2004 and 2009 in two catchments on Skrzyczne in the Silesian Beskid Mountains. The research did not show any statistically significant differences in water chemistry with one exception: pH in June 2009 was higher (average of 0.61) in springs without plant cover change than in the second group. This might be an effect of more water flowing through the more acid soil horizons with higher concentration of humic acids on the deforested area, where large amounts of organic matter were left. It is possible that changes will be observed in the years to come so that further monitoring should take place. &nbsp;


Author(s):  
Adam ŚWIĘTOCHOWSKI ◽  
Jakub GAWRON ◽  
Magdalena DĄBROWSKA ◽  
Aleksander LISOWSKI

The purpose of the study was to determine the influence of the steam explosion process on the change in properties of the material subjected to this process. Wood chips were used before and after the steam explosion (SE), and pellets made from wood chips subjected to steam explosions (black pellet). The scope of the study included determination of physical and chemical characteristics such as moisture content, combustion heat and calorific value, determination of lignin and hemicellulose, cellulose and hydrogen, carbon, nitrogen and sulfur content. hemicellulose compounds. After the process biomass, there are still mainly cellulose and lignin compounds that are readily biodegradable. The process results in a slight increase in material humidity and lower calorific value, but further processing in the form of agglomeration results in reversal of these effects.


2021 ◽  
Vol 12 ◽  
Author(s):  
Petia Simeonova Nikolova ◽  
Jan Geyer ◽  
Peter Brang ◽  
Paolo Cherubini ◽  
Stephan Zimmermann ◽  
...  

Silvicultural interventions such as strip cuttings can change the resource availability of the edge trees. This may alter tree allometry, as light regime, water, and nutrient availability can change at the forest edge. Increased root growth may optimize resource uptake and/or enhance tree anchorage to withstand the altered wind regime. However, little is known about the patterns of the root–shoot allometric responses to strip cuttings. In three alpine stands differing in climate, site productivity, and stand characteristics, we selected 71 Norway spruce trees and took increment cores from stems, root collars, and main roots. This enabled us to study changes in the long-term root-stem allometry for 46 years and short-term allometric responses to intervention. The effects of cutting were compared between edge trees and trees from the stand interior in 10 years before and after the intervention. The long-term allocation to roots increased with stem diameter, with the strongest effects on the regularly managed stand with the tallest and largest trees. These results support the allometric biomass partitioning theory, which postulates resource allocation patterns between different plant organs to depend on plant size. Strip cutting on north-facing slopes boosted edge-tree growth in all plant compartments and enhanced allocation to roots. This change in allometry started 2 years after cutting but disappeared 7–8 years later. In the post-cutting period, the highest root–shoot increase was observed in the small trees independent of the site. This indicates the change in growing conditions to have the strongest effects in formerly suppressed trees. Thus, the effect of such acclimation on the wind firmness of subdominant spruce trees is a question with high importance for optimizing cutting layouts in lowering post-cutting vulnerability to disturbance. The results from this case study contribute to a better understanding of the structural acclimation of spruce trees from high-elevation forests to new forest edges. However, for a more mechanistic understanding of environmental drivers, further analyses of tree-ring stable isotopes are recommended.


2018 ◽  
Vol 11 (1) ◽  
Author(s):  
Leszek Michalak ◽  
Svein Halvor Knutsen ◽  
Ida Aarum ◽  
Bjørge Westereng

Sign in / Sign up

Export Citation Format

Share Document