scholarly journals Viscoelastic behaviour of highly filled polypropylene with solid and liquid Tin microparticles: influence of the stearic acid additive

2021 ◽  
Author(s):  
Antonella Patti ◽  
Domenico Acierno ◽  
Hubert Lecocq ◽  
Anatoli Serghei ◽  
Philippe Cassagnau

AbstractIn this work, highly filled composites made of a commercial polypropylene resin and low melting point Tin particles, up to 50 vol.% in loadings, have been prepared by melt blending process. The introduction of stearic acid (SA), a common dispersant, was investigated in compositions. The developed systems were characterized in terms of dynamic rheological testing. Final results confirmed a reduction of linear viscoelastic domain, by increasing filler loadings, with an effect more emphasized in the presence of SA. Contrary to literature studies, at equal filler content (50%), both moduli resulted to be superior for formulations containing the dispersing agent. A further rheological characterization continued on systems at 30 vol.% of particle loadings for highlighting differences depending on the SA addition. Specific tests were also performed at temperatures above the melting of Tin particles. Finally, optical microscopic analyses were carried out for gaining insight on sample microstructure, in controlled conditions of temperature and shear rate.

2000 ◽  
Vol 13 (2) ◽  
pp. 185-214 ◽  
Author(s):  
Geoffrey Livesey

AbstractAlthough stearic acid is a saturated fatty acid, its influence on plasma cholesterol acid other health variables is neutral; possibly owing in part to poor absorption. Reduced absorption of stearic acid from particular triacylglycerols, cocoa butter and novel fats formulated with short- and long-chain acid triacylglycerol molecules (Salatrims) has been attributed to high intakes. However, the circumstances and causes of poor stearic acid digestion from triacylglycerols are unclear; published data were therefore collected and analysed, with emphasis on human studies. Of twenty-eight studies conducted in adults, most are in men (>90%). The assertion that reduced absorption is due to a high intake of stearoyl groups is not supported: dietary intakes of stearoyl of 0·05–0·65 g stearic acid equivalent/kg body weight (cf typical intake of 0·2 g stearic acid equivalent/kg body weight in the Western diet) indicate that the ‘true’ digestibility of stearoyl is 0·98 (SE 0·01) g/g, with apparent digestibility less than this value at low intakes owing to endogenous stearic acid excretion and to inter-publication variation of unidentified cause. The neutral health impact of stearic acid must be due to factors other than availability. Exceptions include cocoa butter, Salatrims and tristearin, for which digestibility is an additional factor. The efficiency with which human subjects digest stearoyl from cocoa butter still remains uncertain, while the digestion of total long-chain fat from this source is 0·89–0·95 g/g, high in comparison with 0·33 g/g for Salatrim 23CA and 0·15 g/g for tristearin in their prepared states. Salatrims contain the highest proportion of long-chain fatty acids that are stearic acid-rich other than tristearin, which is the main component of fully-hydrogenated soyabean and rapeseed oil. Analysis shows that apparent digestibility of stearic acid is associated with stearoyl density within the triacylglycerol molecule and that, in Salatrims, the occurrence of short-chain fatty acids in place of long-chain fatty acids increases this density. Soap formation appears not to be a major factor in the reduced digestion of stearic acid from tristearin under regular dietary circumstances, but both microcrystallinity and reduced digestibility of tri-, di- and monostearoylglycerols appears to be important. Solubilisation of high-melting-point tristearin in low-melting-point oils improves the digestibility of its stearic acid, particularly when emulsified or liquidized at above melting point. However, without such artificial aids, the digestive tracts of the rat, dog and man have a low capacity for emulsifying and digesting stearic acid from tristearin. Reduced digestibility of stearic acid from Salatrim 23CA also appears to be attributable to reduced digestibility of di- and monostearoylglycerols and is particularly due to remnants with the 1- or 3-stearoylglycerol intact after initial hydrolytic cleavage. Short-chain organic acid in Salatrim 23CA, which is readily hydrolysed, leaves such remnants. Unlike tristearin, Salatrim 23CA melts at body temperature and mixing it with low-melting-point oils is not expected to cause further disruption of microcrystalline structures to aid digestibility of its stearoyl groups. The low digestibility of stearoyl in Salatrim 23CA, together with the occurrence of short-chain organic acids in this product, account for its relatively low nutritional energy value (about 20 kJ (5 kcal)/g) compared with traditional fats (37 kJ (9 kcal)/g) and low fat value (<20:37 kJ/kJ; <5:9 kcal/kcal) relative to traditional fats. In part these differences are because of minor effects of Salatrim 23CA on the excretion of other fat and protein, due to the bulking properties of this poorly-digestible fat.


2013 ◽  
Vol 747 ◽  
pp. 645-648 ◽  
Author(s):  
Koay Seong Chun ◽  
Salmah Husseinsyah ◽  
Hakimah Osman

Polypropylene/Cocoa Pod Husk (PP/CPH) biocomposites with different maleated polypropylene (MAPP) content were prepared via melt blending process using Brabender Plastrograph mixer. The tensile strength and tensile modulus of PP/CPH biocomposites increased with increasing of MAPP content. The PP/CPH biocomposites with 5 phr of MAPP showed the optimum improvement on tensile properties. However, the increased of MAPP content reduced the elongation at break of PP/CPH biocomposites. At 5 phr of MAPP content, PP/CPH biocomposites showed lowest elongation at break. Scanning electron microscope confirms the PP/CPH biocomposites with MAPP have better filler-matrix interaction and adhesion due to the effect of MAPP.


On evaporation at low temperatures of a benzene solution of palmitic or stearic acid on the surface of water an apparently solid film is left. The experiments of I. Langmuir and N. K. Adam have shown that these films are unimolecular in character, and inasmuch that they possess a fairly well defined melting point, although this varies with the acidity of the underlying solution, we may regard these films as unimolecular sheets of orientated solid acid. Anyone who examines these films even superficially cannot fail to notice their exceptional strength, all the more extraordinary when we consider their extreme thinness. Whilst the compressibility of such films, a property which can be readily determined by examination of the slope of the force area curve obtained with the well-known Langmuir trough apparatus, does not present any unusual features, being of the order anticipated for a hydrocarbon, yet we may expect that the coefficient of rigidity will be unexpectedly high. It seemed a matter of some importance to attempt to measure the rigidity of such films, by applying a suitable torque and determining the displacements effected, a method suggested to us by Prof. G. I. Taylor. In our preliminary experiments we endeavoured to employ a simple static method of placing a disc at the centre of a large circular film and applying torsion by means of a torsion head and wire on the disc to which a mirror is attached. We have to express our thanks to Prof. G. I. Taylor for the loan of an excellent and finely-calibrated head for this purpose. After numerous attempts with various modifications of the method we were reluctantly compelled to abandon it. The results were invariably the same; on applying a small torque to the disc no motion was visible on the image of the mirror attached to the disc. If the torque be increased the film is ruptured and the disc breaks loose and slips, generally forcing itself entirely from attachment to the film. Even with discs coated with wax or corrugated and milled on the circular edge no better results were obtained. Evidently the grip on the disc being only of one molecule thick is not sufficient to hold the slightest movement on the part of the shearing disc.


2011 ◽  
Vol 306-307 ◽  
pp. 1735-1740
Author(s):  
Yan Li Dou ◽  
Chun Ling Zhang ◽  
Guoen Sun ◽  
Wen Hui Xu

Rare earth yttria (Y2O3) reinforced polystyrene composites were prepared by melt blending process. Mechanical properties, wear resistance of the PS/Y2O3 composites were characterized in contrast to neat PS. The improvement of the mechanical properties and wear resistance was attributed to the reinforcing effect of Y2O3 powder. Well distribution of Y2O3 powder in the PS matrix and good interfacial bonding were achieved by pretreated of Y2O3 using titanate coupling and dispersant followed by calcinations process. Results indicated that both of the Y2O3 powder pretreatment process and melt blending process have significant effects on the composite properties. When the Y2O3 content were 2.8wt%, the modify effect to PS was optimal. When the Y2O3 calcined at 900°C was used, the impact of the composites were best, other performance improvements have also been good. When the Y2O3 content of 1.4wt%, the wear resistance of the composites were best.


RSC Advances ◽  
2013 ◽  
Vol 3 (44) ◽  
pp. 22326 ◽  
Author(s):  
Lin Pan ◽  
Qi Ji ◽  
Yuwei Qin ◽  
Yingchang Jiang ◽  
Zhongping Zhang ◽  
...  

2018 ◽  
Vol 38 (2) ◽  
pp. 157-166 ◽  
Author(s):  
Jian Wang ◽  
Jie Dong ◽  
Jianwei Zhang ◽  
Baodong Zhu ◽  
Dongling Cui

Abstract This work aimed to study the effects of different surface treatments on the morphologies and thermo-mechanical properties of the bamboo flour/polypropylene (BF/PP) composites, which were prepared by melt blending with 15 wt% of filler load. The BF was first pretreated with 10 wt% sodium hydroxide (NaOH) solutions for 4 h, after which the pre-treated BF was modified by stearic acid and silane. The chemical structure of the treated BF fibers was characterized through Fourier transform infrared spectroscopy (FTIR), and the results showed that alkali treatment efficiently removed hemicellulose, lignin, and pectin. Moreover, stearic acid and silane were successfully introduced to the BF surface through chemical bonding. The changes in heat stability of BF investigated by thermogravimetric analysis (TGA) revealed that the presence of treatment contributes to a better thermal stability for BF fibers. In addition, the scanning electron microscopy (SEM) observation of BF/PP composites displayed not only better dispersion of treated-BF in the polypropylene (PP) matrix, but also improved fiber-matrix interfacial compatibility, especially when silane treatment was used. Accordingly, the mechanical properties improved significantly in the presence of treated-BF.


The process described in part I is shown to involve not only overturning and anchoring but also surface diffusion, the rate of which has been determined. A two-dimensional melting-point of 52°C is found for stearic acid monolayers on mica and the energies of activation for diffusion found to be 42 and 21 kcal/gmol below and above this temperature respectively. In multilayers surface diffusion over the first monolayer deposited on the substrate proceeds much more rapidly than that of the monolayer.


1975 ◽  
Vol 84 (2) ◽  
pp. 281-290 ◽  
Author(s):  
J. L. L'Estrange ◽  
T. A. Mulvihill

SUMMARYTwo surveys, involving 288 lambs, were carried out on the effects of system of production on the melting (slip) point, iodine value, and fatty acid composition of perinephric and subcutaneous carcass fat. The systems studied were:A, early Spring lambs fattened indoors on concentrates;B, early Spring lambs off grass;C, early Summer lambs off grass;D, Autumn lambs off grass, andE, Winter hoggets.The melting point of both perinephric and subcutaneous fat increased progressively during the season from mean values of 41 and 32°C respectively in group A to mean values of 48 and 42°C respectively in group E. Discolouration of the surface fat was associated with the low melting points of group A.Mean iodine values of both fats decreased progressively from group A to group E and this change was associated with a decrease in levels of oleic and palmitoleic acid and a corresponding increase in the level of stearic acid. In the fat, levels of myristic acid were highest in grass fed lambs while levels of linoleic acid were highest in the concentrate-fed lambs.Within each group, perinephric fat contained more stearic and less oleic, palmitoleic, palmitic and myristic acid than subcutaneous fat.Within animals, the levels between perinephric and subcutaneous fat of melting point, iodine value and most of the individual fatty acids were highly correlated.Within animals also, the melting point of perinephric fat was correlated in decreasing order of significance with stearic acid, oleic acid, iodine value, linoleic acid and palmitoleic acid, while melting point of subcutaneous fat was correlated in decreasing order of significance with stearic acid, oleic acid, palmitoleic acid, iodine value, linoleic acid and total branched-chain fatty acids.


Sign in / Sign up

Export Citation Format

Share Document