Fe2O3-decoration and multilayer structure design of Ti3C2 MXene materials toward strong and broadband absorption of electromagnetic waves in the X-band region

2021 ◽  
Author(s):  
Jinbu Su ◽  
Xialin Zhao ◽  
Wancheng Zhou ◽  
Chengbing Wang ◽  
Pengkui Zhang
Keyword(s):  
Multilayer Structure ◽  
Electromagnetic Waves ◽  
Structure Design ◽  
Broadband Absorption ◽  
Band Region ◽  
X Band

Preparation of Ferrimagnetics-Ferroelectrics Composites and Studying Their Microwave Characteristics at X-Band Region

2017 ◽  
Vol 13 (4) ◽  
pp. 182-195
Author(s):  
Tahseen H Mubarak ◽  
◽  
Bruska A. Azhdar ◽  
Saib Thiab Alwan ◽  
Hussein S Mahmood
Keyword(s):  
Band Region ◽  
X Band ◽  
Microwave Characteristics

Free‐Carrier Faraday Rotation of Dendritic InSb Films in the Microwave X‐Band Region

1967 ◽  
Vol 38 (8) ◽  
pp. 3171-3178 ◽  
Author(s):  
D. J. White ◽  
R. J. Dinger ◽  
H. H. Wieder
Keyword(s):  
Faraday Rotation ◽  
Free Carrier ◽  
Band Region ◽  
X Band

Micro-nano multilayer structure design and solid particle erosion resistance performance of CrAlNx/CrAlN coating

Vacuum ◽  
2020 ◽  
Vol 172 ◽  
pp. 109064 ◽  
Author(s):  
Di Wang ◽  
Songsheng Lin ◽  
Lingyun Liu ◽  
Hongzhi Yang ◽  
Jing Shi ◽  
...  
Keyword(s):  
Solid Particle ◽  
Multilayer Structure ◽  
Erosion Resistance ◽  
Structure Design ◽  
Solid Particle Erosion ◽  
Particle Erosion ◽  
Resistance Performance

Performance of a Wideband Cadmium Ferrite Microstrip Patch Antenna in the X-Band Region

2017 ◽  
Vol 47 (1) ◽  
pp. 577-584 ◽  
Author(s):  
S. R. Bhongale ◽  
H. R. Ingavale ◽  
T. J. Shinde ◽  
P. N. Vasambekar
Keyword(s):  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Microstrip Patch ◽  
Band Region ◽  
X Band

scholarly journals Entire X-band region metamaterial absorber and reflector with a microstrip patch switch for X-band applications

2019 ◽  
Vol 15 (3) ◽  
pp. 1452
Author(s):  
M.M. Gajibo ◽  
M. K. A. Rahim ◽  
N. A. Murad ◽  
O. Ayop ◽  
H.A. Majid ◽  
...  
Keyword(s):  
Wide Band ◽  
Metamaterial Absorber ◽  
Frequency Range ◽  
Metamaterial Structure ◽  
Band Frequency ◽  
Microstrip Patch ◽  
Band Region ◽  
X Band

<span>A metamaterial structure capable of operating as a wide band absorber as well as an AMC reflector is presented in this report. A microstrip patch copper was used as a switch to switch between the two modes. An FR4 substrate was used and the incidental wave angles were varied from 0<sup>0</sup> to 60<sup>0</sup>. Simulations results showed that the absorber was able achieve 96% absorption at 13.05 GHz and 100% absorption at 10.00 GHz and 12.00 GHz. Furthermore, it archived over 85% absorption for the entire X-band frequency range. The AMC reflector also was able to achieve 84.97%, 82.88% and 78.69% for incident angles 0<sup>0</sup>, 20<sup>0 </sup>and 40<sup>0</sup> respectively. Unfortunately, the structure is polarization sensitive.</span>

Fan Shaped Patch with Fan Shaped Defected Ground Structure is designed for X-band Applications

2018 ◽  
Vol 8 (4) ◽  
pp. 57
Author(s):  
K.S. Ravi Kumar ◽  
Lalbabu Prasad ◽  
B. Ramesh ◽  
K.P. Vinay
Keyword(s):  
Dielectric Constant ◽  
Low Cost ◽  
Dielectric Substrate ◽  
Substrate Material ◽  
Frequency Range ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Band Region ◽  
X Band ◽  
Simulation Results

In this novel work a simple Fan Shaped Patch (FSP) Antenna is designed for X-band applications using Fan Shaped DGS structure to improve the Bandwidth and Gain. The Antenna is designed by using low cost FR4 Epoxy dielectric substrate material having dielectric constant of 4.4 with size 31.4x28.33x1.6mm3. The Antenna is simulated by using CST MW studio2014 software to analyze the results. The simulation results shows reasonable |S11|<-10 for the frequency range over 8.38 to 11.59GHz in X-band region.

Attenuation and Absorption of Electromagnetic Waves of Nanocomposites (ZnFe2O3 / Graphene: UPE) by Wave Guide Technical

2021 ◽  
Vol 19 (4) ◽  
pp. 71-76
Author(s):  
M.A. Mohammed ◽  
Fadhil K. Farhan ◽  
I.K. Jassim ◽  
A. Sh. Mahmoud
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Electromagnetic Waves ◽  
Weight Ratio ◽  
Microwave Frequencies ◽  
Nano Powder ◽  
Best Value ◽  
X Band ◽  
Ultrasound Technology ◽  
Scanning Electron

In this article, composites with a polymeric basis were prepared and developed with a ZnFe2O3 material dyed with graphene that has the ability to absorb and attenuate by a weight ratio of (1-4) % of the base. The samples were formed by chemical blending and ultrasound technology to homogenize the mixture. The waveguide technique was used at the microwave frequencies in the range of 8- 12 kHz and within the X-band range - the results showed a significant improvement in the absorbance and attenuation by increasing the percentage of the deformed material compared to the blank material, and the best value was obtained at 3%. The compositional examinations of the Nano powder were performed using a scanning electron microscope technology equipped with an EDX scan.

Investigation of microwave absorption property of the core–shell structured Li0.4Mg0.6Fe2O4/TiO2 nanocomposite in X-band region

2014 ◽  
Vol 590 ◽  
pp. 331-340 ◽  
Author(s):  
Pallab Bhattacharya ◽  
Goutam Hatui ◽  
Avinandan Mandal ◽  
Chapal Kumar Das ◽  
Rudresh Kumar ◽  
...  
Keyword(s):  
Microwave Absorption ◽  
Microwave Absorption Property ◽  
Core Shell ◽  
Absorption Property ◽  
The Core ◽  
Band Region ◽  
X Band
Sign in / Sign up

Export Citation Format

Share Document