scholarly journals A Review of Hydraulic Fracturing Simulation

2021 ◽  
Author(s):  
Bin Chen ◽  
Beatriz Ramos Barboza ◽  
Yanan Sun ◽  
Jie Bai ◽  
Hywel R Thomas ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
State Of The Art ◽  
Numerical Models ◽  
Gas Production ◽  
Physical Processes ◽  
Horizontal Drilling ◽  
Improve Treatment ◽  
Multi Stage ◽  
Pros And Cons ◽  
Treatment Designs

AbstractAlong with horizontal drilling techniques, multi-stage hydraulic fracturing has improved shale gas production significantly in past decades. In order to understand the mechanism of hydraulic fracturing and improve treatment designs, it is critical to conduct modelling to predict stimulated fractures. In this paper, related physical processes in hydraulic fracturing are firstly discussed and their effects on hydraulic fracturing processes are analysed. Then historical and state of the art numerical models for hydraulic fracturing are reviewed, to highlight the pros and cons of different numerical methods. Next, commercially available software for hydraulic fracturing design are discussed and key features are summarised. Finally, we draw conclusions from the previous discussions in relation to physics, method and applications and provide recommendations for further research.

scholarly journals Results of the development system optimization and increasing the efficiency of carbonate reserves extraction of the turney stage of the Chetyrmansky deposit

2021 ◽  
pp. 131-142
Author(s):  
T. R. Khisamiev ◽  
◽  
I. R. Bashirov ◽  
V. Sh. Mukhametshin ◽  
L. S. Kuleshova ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Oil Recovery ◽  
High Efficiency ◽  
Methodological Approach ◽  
Horizontal Wells ◽  
System Optimization ◽  
Horizontal Drilling ◽  
Development System ◽  
Multi Stage ◽  
Carbonate Deposits

The article is devoted to the issue of optimizing the development system and increasing the efficiency of carbonate deposits of the Tournaisian stage of the Chetyrmanskoye field developing, and the formation of a strategy for their additional development. As a result of the horizontal drilling, the rate of withdrawal from current recoverable reserves in the main area in terms of reserves increased from 0.3 to 5%, which confirms the high efficiency of horizontal wells drilling with multi-stage hydraulic fracturing in reservoirs with high stratification and heterogeneity degree of the productive section in order to increase the rate of reserves production and achieve the approved oil recovery factor, as well as the high efficiency of the proposed methodological approach in the design of the facility development by a system of horizontal wells, the correct choice of the facility development strategy in the design solutions formation. Keywords: oil fields development; carbonate deposits; development of reserves; multi-stage hydraulic fracturing; horizontal well.

Intelligent Plunger Lift: Digital and Cost-Effective Solution to Unlock Gas Potential in a Large Tight Gas Field in China

2021 ◽  
Author(s):  
JingFei Tang ◽  
Beryl Audrey ◽  
Jin Lin ◽  
Xiang Zhen Meng ◽  
Chao Yu ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Cost Effective ◽  
Gas Production ◽  
Maintenance Cost ◽  
Liquid Loading ◽  
Gas Field ◽  
Horizontal Drilling ◽  
Multistage Hydraulic Fracturing ◽  
Loading System ◽  
Data Surveillance

Abstract The field is located in a large gas producing basin in China and has prominent characteristics such as thin formation thickness, low permeability and poor reservoir connectivity. Horizontal drilling associated with multistage hydraulic fracturing has proven to be an effective technique to produce the hydrocarbon in this field. As the gas wells matures, the production rate starts to decline due to the decreasing of the bottom hole pressure which will prompt a liquid loading issue. A trending gas production loss is up to 150 mmscf in a year due to liquid loading issue alone, which is equivalent to $1.8MM revenue loss. An analytical decline rate showed that the field is declining 3.4% to 4.6% monthly due to the descending of the casing pressure, superimposed with low backflow ratio after hydraulic fracturing, which create a technical and economic challenge to produce effectively. In addition, the location between well pads are remote and far apart. This creates HSE challenge for personnel to go to the well pads, especially during icy road in the winter. Solid soap stick had been tried as a deliquifications method, unfortunately the result is unsustainable without frequent injection. It is also very much relying on human intervention. Due to that, an alternative liquid lift loading system is introduced in the field. An intelligent plunger lift has been piloted in 12 wells in the field to reduce the liquid loading issue in mid 2021. Apart from the apparent advantages of plunger lift such as mitigation of liquid fallback, zero input energy and low operating/maintenance cost, this system is not desirable to fully close well at downstroke process which comes up with increment of gas production comparing to traditional plunger lift system. One of the major advantages is the real time production data surveillance to enable remote operations based on its intelligence flow control system and downhole sensor.

scholarly journals Shale Reservoir-Centric Completions

2016 ◽  
Vol 9 (1) ◽  
pp. 92-106
Author(s):  
John S. Spaid ◽  
Jeff A. Dahl ◽  
Ronald G. Dusterhoft ◽  
Shameem Siddiqui ◽  
Eric Holderby ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Fracture Initiation ◽  
High Rate ◽  
Treatment Schedule ◽  
Statistical Process ◽  
Horizontal Drilling ◽  
Reservoir Performance ◽  
Multi Stage ◽  
Incremental Improvement ◽  
Shale Reservoir

In North America, the transition from more conventional reservoirs into tight, basin-centered gas and now source shales has caused the industry to change the way reservoir performance is being assessed, measured, and documented. Historically in conventional reservoirs the reservoir quality was carefully examined on a well by well basis to determine reserves in place and exploitation plans. For unconventional reservoirs, however, the commercializing of such plays quickly became centered on horizontal drilling of long laterals combined with massive volume, high rate multi-stage hydraulic fracturing. In that environment, completion design and hydraulic fracturing have become more of a statistical process; additionally, incremental improvement and innovation are used to create a treatment schedule often replicated across an entire field without consideration of reservoir variability across a lateral. Based upon vertical well experience, the fracture initiation points can be carefully selected by identifying the locations within the well that are best to perforate. In a horizontal well, however, the location of the lateral defines the fracture initiation points anywhere along the well, so the stratigraphic location of the well lateral becomes critical in non-homogeneous shale plays. To address this, engineers and geoscientists can identify important parameters necessary for optimum completion design, and earth modelling can then be used as a tool to capture and model these properties across the asset making critical information available as needed for drilling, completion, and production operations.

Shale, Quakes, and High Stakes: Regulating Fracking-Induced Seismicity in Oklahoma, USA and Lancashire, UK

2019 ◽  
Vol 3 (1) ◽  
pp. 1-14
Author(s):  
Miriam R. Aczel ◽  
Karen E. Makuch
Keyword(s):  
United States ◽  
Hydraulic Fracturing ◽  
Shale Gas ◽  
Seismic Activity ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
High Volume ◽  
The United States ◽  
Horizontal Drilling ◽  
Induced Seismic Activity

High-volume hydraulic fracturing combined with horizontal drilling has “revolutionized” the United States’ oil and gas industry by allowing extraction of previously inaccessible oil and gas trapped in shale rock [1]. Although the United States has extracted shale gas in different states for several decades, the United Kingdom is in the early stages of developing its domestic shale gas resources, in the hopes of replicating the United States’ commercial success with the technologies [2, 3]. However, the extraction of shale gas using hydraulic fracturing and horizontal drilling poses potential risks to the environment and natural resources, human health, and communities and local livelihoods. Risks include contamination of water resources, air pollution, and induced seismic activity near shale gas operation sites. This paper examines the regulation of potential induced seismic activity in Oklahoma, USA, and Lancashire, UK, and concludes with recommendations for strengthening these protections.

scholarly journals A review on the properties, reinforcing effects, and commercialization of nanomaterials for cement-based materials

2020 ◽  
Vol 9 (1) ◽  
pp. 303-322 ◽  
Author(s):  
Zhifang Zhao ◽  
Tianqi Qi ◽  
Wei Zhou ◽  
David Hui ◽  
Cong Xiao ◽  
...  
Keyword(s):  
Cement Hydration ◽  
State Of The Art ◽  
Research Progress ◽  
Market Survey ◽  
Future Perspectives ◽  
Nano Silica ◽  
Physical Processes ◽  
Existing Problems ◽  
Cement Based Materials ◽  
The Cost

AbstractThe behavior of cement-based materials is manipulated by chemical and physical processes at the nanolevel. Therefore, the application of nanomaterials in civil engineering to develop nano-modified cement-based materials is a promising research. In recent decades, a large number of researchers have tried to improve the properties of cement-based materials by employing various nanomaterials and to characterize the mechanism of nano-strengthening. In this study, the state of the art progress of nano-modified cement-based materials is systematically reviewed and summarized. First, this study reviews the basic properties and dispersion methods of nanomaterials commonly used in cement-based materials, including carbon nanotubes, carbon nanofibers, graphene, graphene oxide, nano-silica, nano-calcium carbonate, nano-calcium silicate hydrate, etc. Then the research progress on nano-engineered cementitious composites is reviewed from the view of accelerating cement hydration, reinforcing mechanical properties, and improving durability. In addition, the market and applications of nanomaterials for cement-based materials are briefly discussed, and the cost is creatively summarized through market survey. Finally, this study also summarizes the existing problems in current research and provides future perspectives accordingly.

Geomechanical Responses During Gas Hydrate Production Induced by Depressurization

2016 ◽  
Author(s):  
Ah-Ram Kim ◽  
Gye-Chun Cho ◽  
Joo-Yong Lee ◽  
Se-Joon Kim
Keyword(s):  
Methane Hydrate ◽  
Fossil Fuel ◽  
Gas Production ◽  
Field Scale ◽  
Production Well ◽  
Physical Processes ◽  
Hydrate Dissociation ◽  
Thermal Changes ◽  
New Energy ◽  
Hydrate Bearing Sediments

Methane hydrate has been received large attention as a new energy source instead of oil and fossil fuel. However, there is high potential for geomechanical stability problems such as marine landslides, seafloor subsidence, and large volume contraction in the hydrate-bearing sediment during gas production induced by depressurization. In this study, a thermal-hydraulic-mechanical coupled numerical analysis is conducted to simulate methane gas production from the hydrate deposits in the Ulleung basin, East Sea, Korea. The field-scale axisymmetric model incorporates the physical processes of hydrate dissociation, pore fluid flow, thermal changes (i.e., latent heat, conduction and advection), and geomechanical behaviors of the hydrate-bearing sediment. During depressurization, deformation of sediments around the production well is generated by the effective stress transformed from the pore pressure difference in the depressurized region. This tendency becomes more pronounced due to the stiffness decrease of hydrate-bearing sediments which is caused by hydrate dissociation.

Sign in / Sign up

Export Citation Format

Share Document