scholarly journals Crystallization and mechanical properties of biodegradable poly(p-dioxanone)/octamethyl-polyhedral oligomeric silsesquioxanes nanocomposites via simple solution casting method

2015 ◽  
Vol 38 (6) ◽  
pp. 1589-1596 ◽  
Author(s):  
ZHECUN WANG ◽  
CHENGDONG XIONG ◽  
QING LI
Keyword(s):  
Mechanical Properties ◽  
Simple Solution ◽  
Solution Casting ◽  
Polyhedral Oligomeric Silsesquioxanes ◽  
Casting Method ◽  
Biodegradable Poly ◽  
Solution Casting Method

scholarly journals The Effect of Stereocomplex Polylactide Particles on the Stereocomplexation of High Molecular Weight Polylactide Blends

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 2018
Author(s):  
Muhammad Samsuri ◽  
Ihsan Iswaldi ◽  
Purba Purnama
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Nucleating Agent ◽  
Solution Casting ◽  
Casting Method ◽  
Crystalline Fraction ◽  
Crystalline Structures ◽  
Solution Casting Method

Stereocomplexation is one of several approaches for improving polylactide (PLA) properties. The high molecular weight of poly L-lactide (PLLA) and poly D-lactide (PDLA) homopolymers are a constraint during the formation of stereocomplex PLAs (s-PLAs). The presence of s-PLA particles in PLA PLLA/PDLA blends can initiate the formation of s-PLA crystalline structures. We used the solution casting method to study the utilization of s-PLA materials from high molecular weight PLLA/PDLA blends for increasing s-PLA formation. The s-PLA particles initiated the formation of high molecular weight PLLA/PDLA blends, obtaining 49.13% s-PLA and 44.34% of the total crystalline fraction. In addition, the mechanical properties were enhanced through s-PLA crystalline formation and the increasing of total crystallinity of the PLLA/PDLA blends. The s-PLA particles supported initiation for s-PLA formation and acted as a nucleating agent for PLA homopolymers. These unique characteristics of s-PLA particles show potential to overcome the molecular weight limitation for stereocomplexation of PLLA/PDLA blends.

The crystallization behaviors and mechanical properties of poly(l-lactic acid)/magnesium oxide nanoparticle composites

RSC Advances ◽  
2016 ◽  
Vol 6 (50) ◽  
pp. 43855-43863 ◽  
Author(s):  
Junping Jia ◽  
Jinjun Yang ◽  
Yun Zhao ◽  
Hui Liang ◽  
Minfang Chen
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Magnesium Oxide ◽  
Solution Casting ◽  
Casting Method ◽  
Oxide Composite ◽  
Solution Casting Method ◽  
Oxide Nanoparticle ◽  
Surface Modified ◽  
Nanoparticle Composites

Nanocomposites of biodegradable PLLA and magnesium oxide composite (PLLA/MgO-NPs) and surface modified magnesium oxide composite (PLLA/m-MgO-NPs) were prepared using a solution casting method.

scholarly journals FTIR spectroscopy characterization and critical comparison of poly(vinyl)alcohol and natural hydroxyapatite derived from fish bone composite for bone-scaffold

2021 ◽  
Vol 2120 (1) ◽  
pp. 012004
Author(s):  
May Teng Hooi ◽  
Siew Wei Phang ◽  
Hui Ying Yow ◽  
Edmund David ◽  
Ning Xin Kim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Vinyl Alcohol ◽  
Fish Bone ◽  
Poly Vinyl Alcohol ◽  
Solution Casting ◽  
Casting Method ◽  
Elongation At Break ◽  
Solution Casting Method ◽  
Extrusion Method

Abstract This paper presents the interaction comparison of poly(vinyl) alcohol (PVA) with hydroxyapatite derived from Spanish Mackerel (SM) and Whitefin Wolf Herring (WWH) bones, in different processing method. PVA filament and solution casting method illustrated higher crystallinity in the FTIR graph as compared to the PVA pellet and filament extrusion method. Besides, minimal interactions between PVA with glycerol and HAp was observed as well. PVA pellet and solution casting method portrait higher interaction as compared to the PVA filament and extrusion method. As for the HAp of SM and WWH, WWH had higher crystallinity and better cell adhesion with a higher Ca/P ratio while SM had relatively better mechanical strength with Ca/P ratio near to stoichiometric value. The loading of HAp (0, 2.5, 5, 10, 20, 30%) does not affect interactions of PVA/HAp composite in FTIR, and thermal properties in TGA. However, it caused an increase in crystallinity at low HAp loading and decreased at higher loading of HAp above 10%. Upon addition of HAp, tensile strength increased and elongation at break decreased. As the loading of HAp increased, both mechanical properties decreased. Scaffold with WWH composite possessed lower tensile strength and higher elongation at break than SM composite. The result of mechanical properties corresponded to the SEM result. ANOVA analysis justified the effect of HAp variations and loading on the mechanical properties of the composite was prominent.

scholarly journals Preparation and Characterization of HPMC/PVP Blend Films Plasticized with Sorbitol

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
H. Somashekarappa ◽  
Y. Prakash ◽  
K. Hemalatha ◽  
T. Demappa ◽  
R. Somashekar
Keyword(s):  
Mechanical Properties ◽  
Hydroxypropyl Methylcellulose ◽  
Solution Casting ◽  
Casting Method ◽  
Elongation At Break ◽  
X Ray ◽  
Blend Films ◽  
X Ray Scattering ◽  
Solution Casting Method

The aim of this present work is to investigate the effect of plasticizers like Sorbitol on microstructural and mechanical properties of hydroxypropyl methylcellulose (HPMC) and Polyvinylpyrrolidone (PVP) blend films. The pure blend and plasticized blend films were prepared by solution casting method and investigated using wide angle X-ray scattering (WAXS) method. WAXS analysis confirms that the plasticizers can enter into macromolecular blend structure and destroy the crystallinity of the films. FTIR spectra show that there are a shift and decrease in the intensity of the peaks confirming the interaction of plasticizer with the blend. Mechanical properties like tensile strength and Young’s Modulus decrease up to 0.6% of Sorbitol content in the films. Percentage of elongation at break increases suggesting that the plasticized films are more flexible than pure blend films. These films are suitable to be used as environmental friendly and biodegradable packaging films.

Biodegradable Oph-POSS/Poly(Lactic Acid) Nanocomposites: Morphology, Thermal Stability and Degradation Property

2015 ◽  
Vol 1120-1121 ◽  
pp. 352-356 ◽  
Author(s):  
Jie Sun ◽  
Qiang Qiang Zhao ◽  
Zheng Yan Cao ◽  
Hai Ning Lv ◽  
Cheng Qun Wang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Degradation Mechanism ◽  
Poly Lactic Acid ◽  
Surface Erosion ◽  
Solution Casting ◽  
Polyhedral Oligomeric Silsesquioxanes ◽  
Biodegradation Rate ◽  
Casting Method ◽  
Mass Fractions ◽  
Solution Casting Method

The purpose of this work was to produce nanocomposites of polylactic acid with oph-POSS (octaphenyl-Polyhedral Oligomeric Silsesquioxanes)-based biodegradable polyester and study morphology, thermal stability and degradation property. Oph-POSS was synthesized via limited-hydrolytic condensation of phenyl trimethoxysilane catalyzed by tetramethylammonium hydroxide. By adding different mass fractions of oph-POSS into the PLA matrix, oph-POSS/PLA nanocomposites were successfully prepared by the solution casting method using chloroform as solvent. SEM(scanning electron microscopy) observations indicated that oph-POSS were homogeneously dispersed in the PLA matrix. The biodegradation rate of oph-POSS/PLA composites was higher than that of neat PLA, moreover, the degradations of neat PLA and oph-POSS/PLA composites underwent the surface erosion mechanism. It was found that the existence of oph-POSS enhanced thermal stability slightly of nanocomposites relative to neat PLA; however, the thermal degradation mechanism of PLA remained unchanged.

Flexible, Transparent Nanocomposite Film with a Large Clay Component and Ordered Structure Obtained by a Simple Solution-Casting Method

Langmuir ◽  
2010 ◽  
Vol 26 (15) ◽  
pp. 12493-12495 ◽  
Author(s):  
Kazuhiro Shikinaka ◽  
Kazuto Aizawa ◽  
Nozomu Fujii ◽  
Yoshihito Osada ◽  
Masatoshi Tokita ◽  
...  
Keyword(s):  
Nanocomposite Film ◽  
Simple Solution ◽  
Solution Casting ◽  
Ordered Structure ◽  
Casting Method ◽  
Solution Casting Method ◽  
Clay Component

A study on the mechanical properties of graphene oxide/epoxy nanocomposites

2021 ◽  
pp. 096739112110111
Author(s):  
Rahim Eqra ◽  
Mohammad Hadi Moghim ◽  
Navid Eqra
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Graphene Oxide ◽  
Solution Casting ◽  
Casting Method ◽  
Epoxy Nanocomposites ◽  
Epoxy Nanocomposite ◽  
Solution Casting Method ◽  
Good Agreement

The aims of this research are to elucidate the role of graphene oxide on the mechanical properties of epoxy and also to obtain an equation for the modeling of its behavior. Accordingly, graphene oxide/epoxy nanocomposite samples are fabricated using the solution casting method. Tensile, flexural, SEM and FTIR tests are conducted on epoxy and the nanocomposite samples afterwards. The obtained results show that the tensile strength of epoxy improves even at low contents of graphene oxide such that 0.3 wt.% of GO yields an improvement of approximately 11.5%. The flexural strength of epoxy is also enhanced by 5.8% with 0.5 wt.% GO. Then, it decreases due to the agglomeration with increasing the GO content. In order to predict the tensile strength of GO/epoxy nanocomposites, a modified Halpin–Tsai equation is obtained with a new introduced correction factor as K = 39.5 Vf 1.135exp(2.9−1644.6 Vf). The obtained equation is in good agreement with the experimental data.

scholarly journals Preparation of PBS/PLLA/HAP Composites by the Solution Casting Method: Mechanical Properties and Biocompatibility

Nanomaterials ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1778
Author(s):  
Muzamil Ahmad Khan ◽  
Zakir Hussain ◽  
Usman Liaqat ◽  
Muhammad Arman Liaqat ◽  
Muhammad Zahoor
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Tissue Regeneration ◽  
Solution Casting ◽  
X Ray Diffraction ◽  
Casting Method ◽  
Butylene Succinate ◽  
Polymeric Scaffolds ◽  
Solution Casting Method ◽  
Xrd Patterns

The use of biodegradable polymeric scaffolds for tissue regeneration is becoming a common practice in the clinic. Therefore, an inclined trend is developing with regards to improving the mechanical properties of these scaffolds. Here, we aim to improve the mechanical properties of poly (butylene succinate) (PBS)/poly (l-lactic acid) (PLLA) blends by incorporating hydroxyapatite nanoparticles (HAP) in the blends to form composites. PBS/PLLA = 100/0, 95/5, 90/10, 85/15, and 0/100 wt% blends, along-with the loadings of a few mg of HAPs, were prepared using the solution casting method. A scanning electron microscope showed the voids and droplets, indicating the immiscibility of blends. Due to this immiscibility, the tensile strength values of the blends were found to be in between that of pure PBS (42.85 MPa) and pure PLLA (31.39 MPa). HAPs act as a compatibilizer by incorporating themselves in the voids and spaces caused by the immiscibility, thus increasing the overall tensile strength of the resulting composite to a certain extent, e.g., the tensile strength of PBS/PLLA = 95/5 loaded with 50 mg HAPs was found to be 51.16 MPa. The structural analysis employing the X-ray diffraction (XRD) patterns confirmed the formation of polymer blends and composites. The contact angle analysis showed that the addition of HAPs increased the hydrophilicity of the resulting composites. Selective samples were investigated based on mechanical properties to see if the blends and composites are biocompatible. The obtained results showed that all of the samples with better mechanical properties demonstrated good biocompatibility. This indicates the effectiveness of scaffolds for tissue regeneration.

Sign in / Sign up

Export Citation Format

Share Document