Influence of Fe3O4 and Carbon Black on the Enhanced Electromagnetic Interference (EMI) Shielding Effectiveness in the Epoxy Resin Matrix

2021 ◽  
Author(s):  
Rohollah Fallah ◽  
Sedigheh Hosseinabadi ◽  
Gholamhossein Pourtaghi
Keyword(s):  
Carbon Black ◽  
Epoxy Resin ◽  
Electromagnetic Interference ◽  
Resin Matrix ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Epoxy Resin Matrix ◽  
Emi Shielding Effectiveness

Researching on X-Band Electromagnetic Interference Shielding Efficiency of MWCNTs Buckypapers Inserted with Mn Nanopowder

NANO ◽  
2018 ◽  
Vol 13 (06) ◽  
pp. 1850061 ◽  
Author(s):  
Shaowei Lu ◽  
Yaoyao Bai ◽  
Jijie Wang ◽  
Chenxu Zhao ◽  
Wei Li ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Energy Dispersive Spectrometer ◽  
Composite Films ◽  
Resin Matrix ◽  
Manufacturing Cost ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Filtration Method ◽  
Emi Shielding Effectiveness ◽  
X Band

Ultrathin multi-walled carbon nanotubes (MWCNTs) buckypapers inserted with Mn nanopowder were fabricated via vacuum filtration method, at a lower manufacturing cost and easier operation. The buckypapers were characterized structurally using scanning electron microscopy, energy-dispersive spectrometer and X-ray diffraction. Electromagnetic interference (EMI) shielding effectiveness (SE) of MWCNTs buckypapers inserted with Mn nanopowder (0–30[Formula: see text]wt.%) were tested in X-band (8.2–12.4[Formula: see text]GHz). When the blended Mn nanopowder content is 20[Formula: see text]wt.%, the buckypaper exhibits much higher EMI SE of average value up to 42[Formula: see text]dB with the thickness of only 0.11[Formula: see text]mm. Further, this buckypaper is flexible and lightweight, and can be integrated with resin matrix composites. Thus, the results and techniques promise a simple and effective approach to achieve lightweight and ultrathin composite films for a wide application prospect in the field of EMI shielding and microwave absorption.

scholarly journals Ultrathin, Lightweight, and Flexible CNT Buckypaper Enhanced Using MXenes for Electromagnetic Interference Shielding

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Rongliang Yang ◽  
Xuchun Gui ◽  
Li Yao ◽  
Qingmei Hu ◽  
Leilei Yang ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
High Performance ◽  
Electronic Devices ◽  
Deposition Process ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
X Band ◽  
Wearable Electronic Devices ◽  
Emi Se

AbstractLightweight, flexibility, and low thickness are urgent requirements for next-generation high-performance electromagnetic interference (EMI) shielding materials for catering to the demand for smart and wearable electronic devices. Although several efforts have focused on constructing porous and flexible conductive films or aerogels, few studies have achieved a balance in terms of density, thickness, flexibility, and EMI shielding effectiveness (SE). Herein, an ultrathin, lightweight, and flexible carbon nanotube (CNT) buckypaper enhanced using MXenes (Ti3C2Tx) for high-performance EMI shielding is synthesized through a facile electrophoretic deposition process. The obtained Ti3C2Tx@CNT hybrid buckypaper exhibits an outstanding EMI SE of 60.5 dB in the X-band at 100 μm. The hybrid buckypaper with an MXene content of 49.4 wt% exhibits an EMI SE of 50.4 dB in the X-band with a thickness of only 15 μm, which is 105% higher than that of pristine CNT buckypaper. Furthermore, an average specific SE value of 5.7 × 104 dB cm2 g−1 is exhibited in the 5-μm hybrid buckypaper. Thus, this assembly process proves promising for the construction of ultrathin, flexible, and high-performance EMI shielding films for application in electronic devices and wireless communications.

Elaboration and Characterization of Cu Based Nanocomposites for Electromagnetic Interferences Shielding

2021 ◽  
Vol 412 ◽  
pp. 177-184
Author(s):  
Farid Kara ◽  
Fadhéla Otmane ◽  
Samir Bellal ◽  
Amira Djenet Guerfi ◽  
S. Triaa
Keyword(s):  
Epoxy Resin ◽  
Xrd Analysis ◽  
High Energy ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
Cell Measurement ◽  
Wave Guides ◽  
Pure Cu ◽  
Thin Samples

An electromagnetic interferences (EMI) shielding is a material that attenuates radiated electromagnetic energy. Polymer nanocomposites is a class of materials that combine electrical, thermal, dielectric, magnetic and/ or mechanical properties, which are useful for the suppression of electromagnetic interferences. In this work, we looked over the effectiveness of the electromagnetic interferences shielding of polymer-based nanocomposites. These are thin samples of epoxy resin strengthened with nanostructured Cu powders. Nanostructured Cu powders were obtained by mechanical milling using the high-energy RETSCH PM400 ball mill (200 rpm). A powder sampling was conducted after 3h, 6h, 12h, 24h, 33h, 46h and 58h milling for characterization requirements. XRD analysis via the Williamson-Hall method shows that the mean crystallites size decreases from 151.6 nm (pure Cu phase) to 13.8 nm (58 h milling). Simultaneously, the lattice strain increases from 0.1% (pure Cu phase) to 0.59% (58 h milling). The elaboration of thin samples was performed by mixing a vol./3 fractions of nanostructured Cu powder, epoxy resin and hardener. Thin slabs of 1 mm thickness were moulded for use in a rectangular wave-guide. The EMI shielding experimental involved a two ports S parameters cell measurement made of R120 metallic wave-guides of rectangular section (19.05x9.525 mm2) and operational over the frequency band of 9.84 to 15 GHz associated to a network analyser. Obtained results show moderate EMI shielding effectiveness for the milled Cu-based slabs.

scholarly journals Electromagnetic Interference Shielding Performance Enhancement of Stretchable Transparent Conducting Silver Nanowire Networks with Graphene Encapsulation

2021 ◽  
Author(s):  
Siyi Yan ◽  
Peng Li ◽  
Zhongshi Ju ◽  
He Chen ◽  
Jiangang Ma
Keyword(s):  
Electromagnetic Interference ◽  
Performance Enhancement ◽  
Mechanical Stability ◽  
Silver Nanowire ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Dielectric Polarization ◽  
Emi Shielding Effectiveness ◽  
Graphene Films ◽  
Transparent Conducting

Abstract Silver nanowire (AgNW) networks are promising transparent conducting materials for electromagnetic interference (EMI) shielding and diverse optoelectronic devices. However, the poor contact between adjacent AgNWs leads to low electrical conductivity and weak mechanical stability of AgNW networks, which are limiting the practical application of these electronics. Here we report an efficient strategy to improve the overall performance of AgNW networks, in which the AgNW networks are sandwiched between two layers of graphene films. The graphene films improve the contact of overlapped AgNWs and bridge the discrete AgNWs, and thus increase the conductivity of graphene/AgNWs/graphene (GAG) films. Microwave permittivity measurements together with mechanism analyses reveal that the graphene films can enhance the EMI shielding effectiveness of AgNW networks through offering extra conduction loss, multiple dielectric polarization centers and multi-reflection processes. As a result, the GAG film with an average transmittance of 88% exhibits a sheet resistance lower than 15 Ω sq− 1 and an EMI shielding effectiveness of 31 dB (in the frequency range of 8.2‒12.4 GHz) after repeated stretching and release at a strain of 40%. Such a total performance is superior to that of most of as-reported transparent conductors. The GAG films therefore show application potential in the age of Internet of Things that electromagnetic radiation pollutions are everywhere.

Flexible, conductive, porous, fibrillar polymer–gold nanocomposites with enhanced electromagnetic interference shielding and mechanical properties

2017 ◽  
Vol 5 (5) ◽  
pp. 1095-1105 ◽  
Author(s):  
Jun Li ◽  
Hu Liu ◽  
Jiang Guo ◽  
Zhen Hu ◽  
Zhijiang Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Gold Nanoparticles ◽  
Self Assembly ◽  
Electromagnetic Interference ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Emi Shielding Effectiveness ◽  
Conductive Nanocomposites ◽  
Gold Nanocomposites

Flexible lightweight conductive nanocomposites prepared by self-assembly of gold nanoparticles on charged polymer nanofibers show enhanced EMI shielding effectiveness and mechanical properties.

EMI Shielding Properties of Polymer Blend with the Inclusion of Graphene Nano Platelets

2021 ◽  
Vol 875 ◽  
pp. 160-167
Author(s):  
Muhammad Fayzan Shakir ◽  
Asra Tariq
Keyword(s):  
Electromagnetic Interference ◽  
Coaxial Cable ◽  
Network Analyzer ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electrically Conductive ◽  
Emi Shielding Effectiveness ◽  
Increasing Trend ◽  
Shielding Properties ◽  
Basic Prediction

Polymer nano composites based on poly vinyl chloride matrix were fabricated using polyaniline (PANI) and graphene nano platelets (GNP) as electrically conductive nano filler for the application of electromagnetic interference (EMI) shielding. DC conductivity was first evaluated by using cyclic voltammetry and found an increasing trend of electrical conductivity as PANI and GNP was added in PVC matrix that confirms the formation of electrically conductive network structure. Dielectric properties like dielectric constant, dielectric loss and AC conductivity were evaluated in frequency range of 100 Hz to 3 MHz that gives basic prediction for EMI shielding effectiveness. Vector Network Analyzer (VNA) was used to assess EMI shielding properties using coaxial cable method in 11GHz to 20GHz range and it was found that a maximum of 29 dB shielding was archived with the incorporation of 15 wt% of PANI in PVC. This value increased to 56 dB as 5 wt% GNP added in PVC/PANI 15 wt% blend. Interaction of matrix with filler, nature of filler and dispersion of filler in matrix are the key parameters for achieving high shielding effectiveness.

CNT@PDMS/NW composite materials with superior electromagnetic shielding

Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Zi-Jing Zhou ◽  
Zhen-Xing Wang ◽  
Xiao-shuai Han ◽  
Jun-Wen Pu
Keyword(s):  
Electromagnetic Interference ◽  
Cellulose Nanofibers ◽  
Original Structure ◽  
Impregnation Method ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Band Frequency ◽  
Conductive Composites ◽  
Emi Shielding Effectiveness ◽  
Xrd Patterns

Abstract Lightweight materials with high electrical conductivity and hydrophobic mechanical properties are ideal materials for electromagnetic interference (EMI) shielding. Herein, the conductive composites with great EMI shielding effectiveness (SE) were successfully obtained by introducing multi-walled carbon nanotube (CNT) and polydimethylsiloxane (PDMS) based on the original structure of natural wood (NW). CNT@PDMS/NW composites were prepared via vacuum-pulse impregnation method and characterized by Fourier transform infrared (FTIR), scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) patterns, hydrophobicity analysis, and EMI shielding performance. As demonstrated, CNT nanosheets were successfully inserted into wood matrices, and hydrogen bonding between CNT nanosheets and cellulose nanofibers induced the fabrication of CNT@PDMS/NW composites. CNT@PDMS/NW composites exhibited excellent EMI SE values of 25.2 dB at the X-band frequency.

Freestanding Fe3O4 / Ti3C2Tx MXene / polyurethane composite film with efficient electromagnetic shielding and ultra-stretchable performance

2022 ◽  
Author(s):  
Yongqin Hu ◽  
Chen Hou ◽  
Yuxia Shi ◽  
Jiamei Wu ◽  
Da Yang ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Tensile Elongation ◽  
Energy Conversion Efficiency ◽  
High Energy ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
Polyurethane Composite ◽  
Human Reproductive ◽  
Interfacial Scattering

Abstract Electromagnetic pollution seriously affects the human reproductive system, cardiovascular system, people’s visual system, and so on. A novel versatile stretchable and biocompatible electromagnetic interference (EMI) shielding film has been developed, which could effectively attenuate electromagnetic radiation. The EMI shielding film was fabricated with a convenient solution casting and steam annealing with 2D MXene, iron oxide nanoparticles, and soluble polyurethane. The EMI shielding effectiveness is about 30.63 dB at 8.2 GHz, based on its discretized interfacial scattering and high energy conversion efficiency. Meanwhile, the excellent tensile elongation is 30.5%, because of the sliding migration and gradient structure of the nanomaterials doped in a polymer matrix. In addition, the film also demonstrated wonderful biocompatibility and did not cause erythema and discomfort even after being attached to the arm skin over 12 hours, which shows the great potential for attenuation of electromagnetic irradiation and protection of human health.

Sign in / Sign up

Export Citation Format

Share Document