scholarly journals Artificial Neural Networks on FPGAs for Real-Time Energy Reconstruction of the ATLAS LAr Calorimeters

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Georges Aad ◽  
Anne-Sophie Berthold ◽  
Thomas Calvet ◽  
Nemer Chiedde ◽  
Etienne Marie Fortin ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Real Time ◽  
Hadron Collider ◽  
Liquid Argon ◽  
Learning Approaches ◽  
High Luminosity ◽  
Proton Proton ◽  
Real Time Processing ◽  
Energy Reconstruction

AbstractThe ATLAS experiment at the Large Hadron Collider (LHC) is operated at CERN and measures proton–proton collisions at multi-TeV energies with a repetition frequency of 40 MHz. Within the phase-II upgrade of the LHC, the readout electronics of the liquid-argon (LAr) calorimeters of ATLAS are being prepared for high luminosity operation expecting a pileup of up to 200 simultaneous proton–proton interactions. Moreover, the calorimeter signals of up to 25 subsequent collisions are overlapping, which increases the difficulty of energy reconstruction by the calorimeter detector. Real-time processing of digitized pulses sampled at 40 MHz is performed using field-programmable gate arrays (FPGAs). To cope with the signal pileup, new machine learning approaches are explored: convolutional and recurrent neural networks outperform the optimal signal filter currently used, both in assignment of the reconstructed energy to the correct proton bunch crossing and in energy resolution. The improvements concern in particular energies derived from overlapping pulses. Since the implementation of the neural networks targets an FPGA, the number of parameters and the mathematical operations need to be well controlled. The trained neural network structures are converted into FPGA firmware using automated implementations in hardware description language and high-level synthesis tools. Very good agreement between neural network implementations in FPGA and software based calculations is observed. The prototype implementations on an Intel Stratix-10 FPGA reach maximum operation frequencies of 344–640 MHz. Applying time-division multiplexing allows the processing of 390–576 calorimeter channels by one FPGA for the most resource-efficient networks. Moreover, the latency achieved is about 200 ns. These performance parameters show that a neural-network based energy reconstruction can be considered for the processing of the ATLAS LAr calorimeter signals during the high-luminosity phase of the LHC.

scholarly journals Energy reconstruction in a liquid argon calorimeter cell using convolutional neural networks

2022 ◽  
Vol 17 (01) ◽  
pp. P01002
Author(s):  
L. Polson ◽  
L. Kurchaninov ◽  
M. Lefebvre
Keyword(s):  
Neural Networks ◽  
Convolutional Neural Networks ◽  
Hadron Collider ◽  
Liquid Argon ◽  
Significant Loss ◽  
Optimal Filter ◽  
Filter Technique ◽  
Energy Reconstruction ◽  
Processing Techniques ◽  
Signal Processing Techniques

Abstract The liquid argon ionization current in a sampling calorimeter cell can be analyzed to determine the energy of detected particles. In practice, experimental artifacts such as pileup and electronic noise make the inference of energy from current a difficult process. The beam intensity of the Large Hadron Collider will be significantly increased during the Phase-II long shut-down of 2025–2027. Signal processing techniques that are used to extract the energy of detected particles in the ATLAS detector will suffer a significant loss in performance under these conditions. This paper compares the presently used optimal filter technique to convolutional neural networks for energy reconstruction in the ATLAS liquid argon hadronic end cap calorimeter. In particular, it is shown that convolutional neural networks trained with an appropriately tuned and novel loss function are able to outperform the optimal filter technique.

Real-time Detection of Aortic Valve in Echocardiography using Convolutional Neural Networks

2020 ◽  
Vol 16 (5) ◽  
pp. 584-591 ◽  
Author(s):  
Muhammad Hanif Ahmad Nizar ◽  
Chow Khuen Chan ◽  
Azira Khalil ◽  
Ahmad Khairuddin Mohamed Yusof ◽  
Khin Wee Lai
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Heart Disease ◽  
Aortic Valve ◽  
Real Time ◽  
Convolutional Neural Networks ◽  
Valvular Heart Disease ◽  
Detection System ◽  
Processing Unit ◽  
Real Time Detection

Background: Valvular heart disease is a serious disease leading to mortality and increasing medical care cost. The aortic valve is the most common valve affected by this disease. Doctors rely on echocardiogram for diagnosing and evaluating valvular heart disease. However, the images from echocardiogram are poor in comparison to Computerized Tomography and Magnetic Resonance Imaging scan. This study proposes the development of Convolutional Neural Networks (CNN) that can function optimally during a live echocardiographic examination for detection of the aortic valve. An automated detection system in an echocardiogram will improve the accuracy of medical diagnosis and can provide further medical analysis from the resulting detection. Methods: Two detection architectures, Single Shot Multibox Detector (SSD) and Faster Regional based Convolutional Neural Network (R-CNN) with various feature extractors were trained on echocardiography images from 33 patients. Thereafter, the models were tested on 10 echocardiography videos. Results: Faster R-CNN Inception v2 had shown the highest accuracy (98.6%) followed closely by SSD Mobilenet v2. In terms of speed, SSD Mobilenet v2 resulted in a loss of 46.81% in framesper- second (fps) during real-time detection but managed to perform better than the other neural network models. Additionally, SSD Mobilenet v2 used the least amount of Graphic Processing Unit (GPU) but the Central Processing Unit (CPU) usage was relatively similar throughout all models. Conclusion: Our findings provide a foundation for implementing a convolutional detection system to echocardiography for medical purposes.

scholarly journals Identification of Granule Growth Regimes in High Shear Wet Granulation Processes Using a Physics-Constrained Neural Network

Processes ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 737
Author(s):  
Chaitanya Sampat ◽  
Rohit Ramachandran
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Real Time ◽  
Data Driven ◽  
Wet Granulation ◽  
Manufacturing Processes ◽  
High Shear ◽  
Process Data ◽  
Physical Constraints ◽  
Granule Growth

The digitization of manufacturing processes has led to an increase in the availability of process data, which has enabled the use of data-driven models to predict the outcomes of these manufacturing processes. Data-driven models are instantaneous in simulate and can provide real-time predictions but lack any governing physics within their framework. When process data deviates from original conditions, the predictions from these models may not agree with physical boundaries. In such cases, the use of first-principle-based models to predict process outcomes have proven to be effective but computationally inefficient and cannot be solved in real time. Thus, there remains a need to develop efficient data-driven models with a physical understanding about the process. In this work, we have demonstrate the addition of physics-based boundary conditions constraints to a neural network to improve its predictability for granule density and granule size distribution (GSD) for a high shear granulation process. The physics-constrained neural network (PCNN) was better at predicting granule growth regimes when compared to other neural networks with no physical constraints. When input data that violated physics-based boundaries was provided, the PCNN identified these points more accurately compared to other non-physics constrained neural networks, with an error of <1%. A sensitivity analysis of the PCNN to the input variables was also performed to understand individual effects on the final outputs.

A real-time music detection method based on convolutional neural network using Mel-spectrogram and spectral flux

2021 ◽  
Vol 263 (1) ◽  
pp. 5910-5918
Author(s):  
Yiya Hao ◽  
Yaobin Chen ◽  
Weiwei Zhang ◽  
Gong Chen ◽  
Liang Ruan
Keyword(s):  
Neural Network ◽  
Online Education ◽  
Convolutional Neural Network ◽  
Real Time ◽  
Speech Intelligibility ◽  
Classical Music ◽  
Detection Method ◽  
Automatic Gain Control ◽  
Real Time Processing ◽  
Spectral Flux

Audio processing, including speech enhancement system, improves speech intelligibility and quality in real-time communication (RTC) such as online meetings and online education. However, such processing, primarily noise suppression and automatic gain control, is harmful to music quality when the captured signal is music instead of speech. A music detector can solve the issue above by switching off the speech processing when the music is detected. In RTC scenarios, the music detector should be low-complexity and cover various situations, including different types of music, background noises, and other acoustical environments. In this paper, a real-time music detection method with low-computation complexity is proposed, based on a convolutional neural network (CNN) using Mel-spectrogram and spectral flux as input features. The proposed method achieves overall 90.63% accuracy under different music types (classical music, instruments solos, singing-songs, etc.), speech languages (English and Mandarin), and noise types. The proposed method is constructed on a lightweight CNN model with a small feature size, which guarantees real-time processing.

scholarly journals Real-Time Guitar Amplifier Emulation with Deep Learning

2020 ◽  
Vol 10 (3) ◽  
pp. 766 ◽  
Author(s):  
Alec Wright ◽  
Eero-Pekka Damskägg ◽  
Lauri Juvela ◽  
Vesa Välimäki
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Real Time ◽  
Reference Signal ◽  
Network Models ◽  
Neural Network Models ◽  
Desktop Computer ◽  
The Neural Network ◽  
Highly Nonlinear ◽  
The Difference

This article investigates the use of deep neural networks for black-box modelling of audio distortion circuits, such as guitar amplifiers and distortion pedals. Both a feedforward network, based on the WaveNet model, and a recurrent neural network model are compared. To determine a suitable hyperparameter configuration for the WaveNet, models of three popular audio distortion pedals were created: the Ibanez Tube Screamer, the Boss DS-1, and the Electro-Harmonix Big Muff Pi. It is also shown that three minutes of audio data is sufficient for training the neural network models. Real-time implementations of the neural networks were used to measure their computational load. To further validate the results, models of two valve amplifiers, the Blackstar HT-5 Metal and the Mesa Boogie 5:50 Plus, were created, and subjective tests were conducted. The listening test results show that the models of the first amplifier could be identified as different from the reference, but the sound quality of the best models was judged to be excellent. In the case of the second guitar amplifier, many listeners were unable to hear the difference between the reference signal and the signals produced with the two largest neural network models. This study demonstrates that the neural network models can convincingly emulate highly nonlinear audio distortion circuits, whilst running in real-time, with some models requiring only a relatively small amount of processing power to run on a modern desktop computer.

Hand gesture recognition by means of region-based convolutional neural networks

2017 ◽  
Vol 10 (27) ◽  
pp. 1329-1342 ◽  
Author(s):  
Javier O. Pinzon Arenas ◽  
Robinson Jimenez Moreno ◽  
Paula C. Useche Murillo
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Real Time ◽  
Convolutional Neural Networks ◽  
Gesture Recognition ◽  
Hand Gesture ◽  
Hand Gestures ◽  
The Neural Network ◽  
Average Accuracy

This paper presents the implementation of a Region-based Convolutional Neural Network focused on the recognition and localization of hand gestures, in this case 2 types of gestures: open and closed hand, in order to achieve the recognition of such gestures in dynamic backgrounds. The neural network is trained and validated, achieving a 99.4% validation accuracy in gesture recognition and a 25% average accuracy in RoI localization, which is then tested in real time, where its operation is verified through times taken for recognition, execution behavior through trained and untrained gestures, and complex backgrounds.

scholarly journals Comparative Performance Analysis of Neural Network Real-Time Object Detections in Different Implementations

2020 ◽  
Vol 226 ◽  
pp. 02020
Author(s):  
Alexey V. Stadnik ◽  
Pavel S. Sazhin ◽  
Slavomir Hnatic
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Computer Vision ◽  
Performance Analysis ◽  
Object Detection ◽  
Real Time ◽  
Network Architecture ◽  
Neural Network Architecture ◽  
Comparative Performance

The performance of neural networks is one of the most important topics in the field of computer vision. In this work, we analyze the speed of object detection using the well-known YOLOv3 neural network architecture in different frameworks under different hardware requirements. We obtain results, which allow us to formulate preliminary qualitative conclusions about the feasibility of various hardware scenarios to solve tasks in real-time environments.

scholarly journals Efficient Training of Artificial Neural Networks for Autonomous Navigation

1991 ◽  
Vol 3 (1) ◽  
pp. 88-97 ◽  
Author(s):  
Dean A. Pomerleau
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Networks ◽  
Real Time ◽  
Autonomous Navigation ◽  
Training Techniques ◽  
Human Driver ◽  
Backpropagation Network ◽  
Artificial Neural ◽  
Network Project

The ALVINN (Autonomous Land Vehicle In a Neural Network) project addresses the problem of training artificial neural networks in real time to perform difficult perception tasks. ALVINN is a backpropagation network designed to drive the CMU Navlab, a modified Chevy van. This paper describes the training techniques that allow ALVINN to learn in under 5 minutes to autonomously control the Navlab by watching the reactions of a human driver. Using these techniques, ALVINN has been trained to drive in a variety of circumstances including single-lane paved and unpaved roads, and multilane lined and unlined roads, at speeds of up to 20 miles per hour.

Sign in / Sign up

Export Citation Format

Share Document