The characterization of coal at high heating rates

Fuel ◽  
1989 ◽  
Vol 68 (2) ◽  
pp. 267-269
Author(s):  
D.G. Richards ◽  
B.J. Stokes
Keyword(s):  
Heating Rates ◽  
High Heating

Microscopic Characterization of Cosintered Copper/Cordierite Interfaces

1989 ◽  
Vol 153 ◽  
Author(s):  
J. Werckmann ◽  
B.S. Han ◽  
J. Faerber ◽  
P. Humbert ◽  
B. Carriere ◽  
...  
Keyword(s):  
Sol Gel ◽  
Copper Compound ◽  
Heating Rates ◽  
Good Adhesion ◽  
Adhesion Properties ◽  
Microscopic Scale ◽  
Structural Modifications ◽  
High Heating ◽  
Bonding Technique

AbstractCopper and sol-gel processed cordierite were cosintered in oxidizing atmosphere using an eutectic bonding technique. Firing at low and high heating rates leads to interfaces which present different macroscopic properties. These interfaces were therefore investigated on a microscopic scale by SEM, XPS and STEM analyses. Copper diffusion as well as strong chemical and structural modifications were observed in the interface region. Although these interfaces have good adhesion properties, there was no evidence for the formation of some interfacial copper compound.

Transparent Film Heaters based on Silver Nanowire Random Networks

2012 ◽  
Vol 1449 ◽  
Author(s):  
Jean-Pierre Simonato ◽  
Caroline Celle ◽  
Celine Mayousse ◽  
Alexandre Carella ◽  
Henda Basti ◽  
...  
Keyword(s):  
Silver Nanowires ◽  
Silver Nanowire ◽  
Random Networks ◽  
Transparent Film ◽  
Heating Rates ◽  
Large Area ◽  
High Heating ◽  
Fabrication And Characterization ◽  
Printing Techniques

ABSTRACTWe present the fabrication and characterization of transparent thin film heaters (TTFHs) based on silver nanowires. The goal is to develop a simple process for the production of transparent heating elements by large area printing techniques. The TTFHs are based on recently developed random networks of silver nanowires. Thanks to the very low sheet resistance achievable with silver nanowires, we show that it is possible to obtain high heating rates and good steady state temperatures at low voltages, typically below 12 V.

Design and Characterization of an Entrained Flow Reactor for the Study of Biomass Pyrolysis Chemistry at High Heating Rates

2001 ◽  
Vol 15 (5) ◽  
pp. 1276-1285 ◽  
Author(s):  
Alexander L. Brown ◽  
David C. Dayton ◽  
Mark R. Nimlos ◽  
John W. Daily
Keyword(s):  
Flow Reactor ◽  
Biomass Pyrolysis ◽  
Heating Rates ◽  
Entrained Flow ◽  
High Heating ◽  
Entrained Flow Reactor

Comparing fast inductive tempering and conventional tempering: Effects on microstructure and mechanical properties

2018 ◽  
Vol 115 (4) ◽  
pp. 407 ◽  
Author(s):  
Annika Eggbauer Vieweg ◽  
Gerald Ressel ◽  
Peter Raninger ◽  
Petri Prevedel ◽  
Stefan Marsoner ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Impact Energy ◽  
Charpy Impact ◽  
Heat Treating ◽  
Processing Route ◽  
High Heating Rate ◽  
Heating Rates ◽  
High Heating ◽  
Tempering Treatment ◽  
Carbide Distribution

Induction heating processes are of rising interest within the heat treating industry. Using inductive tempering, a lot of production time can be saved compared to a conventional tempering treatment. However, it is not completely understood how fast inductive processes influence the quenched and tempered microstructure and the corresponding mechanical properties. The aim of this work is to highlight differences between inductive and conventional tempering processes and to suggest a possible processing route which results in optimized microstructures, as well as desirable mechanical properties. Therefore, the present work evaluates the influencing factors of high heating rates to tempering temperatures on the microstructure as well as hardness and Charpy impact energy. To this end, after quenching a 50CrMo4 steel three different induction tempering processes are carried out and the resulting properties are subsequently compared to a conventional tempering process. The results indicate that notch impact energy raises with increasing heating rates to tempering when realizing the same hardness of the samples. The positive effect of high heating rate on toughness is traced back to smaller carbide sizes, as well as smaller carbide spacing and more uniform carbide distribution over the sample.

Effect of low and high heating rates on reaction path of Ni(V)/Al multilayer

2017 ◽  
Vol 193 ◽  
pp. 244-252 ◽  
Author(s):  
Łukasz Maj ◽  
Jerzy Morgiel ◽  
Maciej Szlezynger ◽  
Piotr Bała ◽  
Grzegorz Cios
Keyword(s):  
Reaction Path ◽  
Heating Rates ◽  
High Heating

A FUNDAMENTAL STUDY ON THE COMBUSTION CHARACTERISTICS OF MUNICIPAL WASTE PLASTICS UNDER HIGH HEATING RATES

1995 ◽  
Author(s):  
Θωμαή Παναγιώτου
Keyword(s):  
Combustion Characteristics ◽  
Municipal Waste ◽  
Waste Plastics ◽  
Heating Rates ◽  
Fundamental Study ◽  
High Heating

ΑΥΤΗ Η ΕΡΓΑΣΙΑ ΕΙΝΑΙ ΜΙΑ ΒΑΣΙΚΗ ΕΡΕΥΝΑ ΕΠΑΝΩ ΣΤΗΝ ΚΑΥΣΗ ΠΛΑΣΤΙΚΩΝ ΠΟΥ ΒΡΙΣΚΟΝΤΑΙ ΣΤΑ ΑΠΟΡΡΙΜΑΤΑ (ΠΟΛΥ-ΣΤΥΡΕΝΙΟ (PS), ΠΟΛΥ-ΕΘΥΛΕΝΙΟ (ΡΕ) ΚΑΙ PVC). ΣΦΑΙΡΙΚΑ ΣΩΜΑΤΙΔΙΑ ΠΛΑΣΤΙΚΩΝ ΙΣΟΥ ΜΕΓΕΘΟΥΣ ΔΗΜΙΟΥΡΓΗΘΗΚΑΝ ΣΤΟ ΕΡΓΑΣΤΗΡΙΟ ΚΑΙ ΚΑΗΚΑΝ ΕΝΑ, ΕΝΑ ΣΕ ΗΛΕΚΤΡΙΚΟ ΦΟΥΡΝΟ ΚΑΙ ΘΕΡΜΟΚΡΑΣΙΕΣ 1040 -1400 Κ. Η ΚΑΥΣΗ ΤΩΝ ΣΩΜΑΤΙΔΙΩΝ ΜΕΛΕΤΗΘΗΚΕ ΜΕ ΕΝΑ ΤΡΙΧΡΩΜΑΤΙΚΟ ΠΥΡΟΜΕΤΡΟ ΚΑΙ ΜΙΑ ΥΨΗΛΗΣ ΤΑΧΗΤΗΤΑΣ ΚΙΝΗΜΑΤΟΓΡΑΦΙΚΗ ΜΗΧΑΝΗ, ΩΣΤΕ ΝΑ ΣΥΛΛΕΧΘΟΥΝ ΟΙ ΕΞΗΣ ΠΛΗΡΟΦΟΡΙΕΣ: Α) Ο ΧΡΟΝΟΣ ΤΗΣ ΚΑΥΣΗΣ, Β) ΤΟ ΕΙΔΟΣ ΤΗΣ ΚΑΥΣΗΣ (ΟΜΟΙΟΓΕΝΗΣ Η ΕΤΕΡΟΓΕΝΗΣ), Γ) ΤΟ ΠΑΧΟΣ ΤΗΣ ΦΛΟΓΑΣ ΚΑΙ Δ) Η ΤΑΧΥΤΗΤΑ ΠΤΩΣΗΣ ΤΩΝ ΣΩΜΑΤΙΔΙΩΝ. ΟΙ ΠΛΗΡΟΦΟΡΙΕΣ ΑΥΤΕΣ ΧΡΗΣΙΜΟΠΟΙΗΘΗΚΑΝ ΓΙΑ ΤΟΝ ΥΠΟΛΟΓΙΣΜΟ ΤΗΣ ΣΤΙΓΜΙΑΙΑΣ ΠΕΡΙΕΚΤΙΚΟΤΗΤΑΣ ΤΗΣ ΦΛΟΓΑΣ ΣΕ ΑΙΘΑΛΗ ΚΑΙ ΤΗΣ ΠΡΩΤΕΥΟΥΣΑΣ ΦΥΣΙΚΗΣ ΚΑΙ ΧΗΜΙΚΗΣ ΔΙΕΡΓΑΣΙΑΣ ΚΑΤΑ ΤΗΝ ΚΑΥΣΗ ΤΩΝ ΣΩΜΑΤΙΔΙΩΝ. ΚΑΘΕ ΥΛΙΚΟ ΠΑΡΟΥΣΙΑΣΕ ΜΟΝΑΔΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ ΚΑΥΣΗΣ. ΟΙ ΦΛΟΓΕΣ ΤΩΝ PVC ΣΩΜΑΤΙΔΙΩΝ ΕΙΧΑΝ ΤΗΝ ΜΕΓΑΛΥΤΕΡΗ ΠΕΡΙΕΚΤΙΚΟΤΗΤΑ ΣΕ ΑΙΘΑΛΗ, ΕΝΩ ΤΩΝ ΡΕ ΤΗΝ ΜΙΚΡΟΤΕΡΗ. Η ΤΑΧΥΤΗΤΑ ΚΑΥΣΗΣ ΤΩΝ PS ΣΩΜΑΤΙΔΙΩΝ ΒΡΕΘΗΚΕ ΟΤΙ ΕΞΑΡΤΑΤΑΙ ΑΠΟ ΤΗΝ ΤΑΧΥΤΗΤΑ ΔΙΑΧΥΣΗΣ ΣΤΗΝ ΑΕΡΙΑ ΦΑΣΗ, ΕΝΩ ΤΩΝ ΡΕ ΑΠΟ ΤΗΝ ΤΑΧΥΤΗΤΑ ΠΥΡΟΛΥΣΗΣ ΤΩΝ ΣΩΜΑΤΙΔΙΩΝ. Η ΑΝΑΦΛΕΞΗ ΤΩΝ PVC ΣΩΜΑΤΙΔΙΩΝ ΕΜΠΟΔΙΣΤΗΚΕ ΑΠΟ ΤΗΝ ΥΠΑΡΞΗ ΤΗΣ ΧΛΩΡΙΝΗΣ ΠΟΥ ΔΙΕΦΥΓΕ ΑΡΧΙΚΑ. ΟΤΑΝ Η ΚΑΥΣΗ ΑΡΧΙΣΕ, ΔΗΜΙΟΥΡΓΗΘΗΚΕ ΜΙΑ ΠΑΧΙΑ ΚΑΙ ΠΡΟΑΝΑΜΙΓΜΕΝΗ ΦΛΟΓΑ ΓΥΡΩΑΠΟ ΤΟ ΣΩΜΑΤΙΔΙΟ.

Design and Characterization of a Novel Upward Flow Reactor for the Study of High-Temperature Thermal Reduction for Solar-Driven Processes

2017 ◽  
Vol 139 (5) ◽  
Author(s):  
H. Evan Bush ◽  
Karl-Philipp Schlichting ◽  
Robert J. Gill ◽  
Sheldon M. Jeter ◽  
Peter G. Loutzenhiser
Keyword(s):  
High Temperature ◽  
Flow Reactor ◽  
Thermal Reduction ◽  
Heat Fluxes ◽  
O2 Evolution ◽  
Transfer Model ◽  
Upward Flow ◽  
Heating Rates ◽  
Solar Simulator

The design and characterization of an upward flow reactor (UFR) coupled to a high flux solar simulator (HFSS) under vacuum is presented. The UFR was designed to rapidly heat solid samples with concentrated irradiation to temperatures greater than 1000 °C at heating rates in excess of 50 K/s. Such conditions are ideal for examining high-temperature thermal reduction kinetics of reduction/oxidation-active materials by temporally monitoring O2 evolution. A steady-state, computational fluid dynamics (CFD) model was employed in the design to minimize the formation of eddies and recirculation, and lag and dispersion were characterized through a suite of O2 tracer experiments using deconvolution and the continuously stirred tank reactors (CSTR) in series models. A transient, CFD and heat transfer model of the UFR was combined with Monte Carlo ray tracing (MCRT) to determine radiative heat fluxes on the sample from the HFSS to model spatial and temporal sample temperatures. The modeled temperatures were compared with those measured within the sample during an experiment in which Co3O4 was thermally reduced to CoO and O2. The measured temperatures within the bed were bounded by the average top and bottom modeled bed temperatures for the duration of the experiment. Small variances in the shape of the modeled versus experimental temperatures were due to contact resistance between the thermocouple and particles in the bed and changes in the spectral absorptivity and emissivity as the Co3O4 was reduced to CoO and O2.

PTFE–Al2O3 reactive interaction at high heating rates

2014 ◽  
Vol 119 (1) ◽  
pp. 245-251 ◽  
Author(s):  
M. A. Hobosyan ◽  
Kh. G. Kirakosyan ◽  
S. L. Kharatyan ◽  
K. S. Martirosyan
Keyword(s):  
Heating Rates ◽  
High Heating ◽  
Reactive Interaction
Sign in / Sign up

Export Citation Format

Share Document