NON-WOOD PRODUCTS | Rubber Trees

2004 ◽  
pp. 627-633 ◽  
Author(s):  
P.W. Allen
Keyword(s):  
Wood Products

Residential tornado safe room from commodity wood products – impact and wind pressure testing

2018 ◽  
Author(s):  
Robert H. Falk ◽  
James J. Bridwell ◽  
C. Adam Senalik ◽  
Marshall Begel
Keyword(s):  
Wood Products ◽  
Wind Pressure ◽  
Pressure Testing

Der Spielraum bei der Vermarktung von Waldleistungen ist eingeschränkt (Essay) | The scope for the commercialization of forest services is limited (essay)

2009 ◽  
Vol 160 (8) ◽  
pp. 228-231
Author(s):  
Hansruedi Walther
Keyword(s):  
Private Property ◽  
Legal Framework ◽  
Third Parties ◽  
Wood Products ◽  
Forest Owner ◽  
Free Access ◽  
School Class ◽  
Market Niche ◽  
The Right ◽  
Exclusive Right

A forest owner can only commercialize non-wood products and services within a tightly restricted market niche. On account of free access being permitted to the forest it is impossible to deny to third parties the consumption of many non-wood products and services: everybody has the right to be in the forest for recreation. As a result many non-wood services cannot be commercialized by the forest owner, or not exclusively. What would seem unthinkable elsewhere on private property seems to be taken for granted in the forest: third parties may take products from the forest and even sell them without being the forest owners. For certain nonwood services or products, such as the installation of rope parks or for burial in the forest, the organizer must conclude an agreement with the forest owner or draw up a contract for servitude or benefit. In addition, for these activities a permit from the Forestry Department is necessary. On the other hand, for an itinerant school class or for the production of forest honey neither a binding regulation with the forest owner nor a permit from the Forestry service is necessary, provided that no constructions are erected in the forest. The only exclusive right which remains to the forest owner, besides the sale of his property, is the exploitation of his trees within the legal framework.

Senkenanrechnung gemäss Kyoto-Protokoll: Perspektiven für die Waldwirtschaft | Taking carbon sinks into account according to the Kyoto Protocol: a prospect for the forest sector

2008 ◽  
Vol 159 (9) ◽  
pp. 296-302
Author(s):  
Richard Volz
Keyword(s):  
Kyoto Protocol ◽  
Emissions Trading ◽  
Wood Products ◽  
Forest Sector ◽  
Carbon Sinks ◽  
Forest Owners ◽  
Trading Market ◽  
Reduce Emissions ◽  
Emission Reduction Target ◽  
Actual Target

The Kyoto Protocol makes provisions for carbon sinks from forest management to be taken into account as a contribution towards fulfilling a country's emission reduction target. Additional emission allowances are allocated for these forest carbon sinks. If Switzerland uses this extra contingent of allowances to the full it would then only have to reduce emissions by 4.5% instead of the actual target of 8%. Emission allowances from carbon sinks can be traded on the emissions trading market and be claimed by forest owners. An assessment of the income that could be anticipated was carried out in four forestry companies: with the CO2 price set at 10 CHF per ton it was seen that a potential revenue of between 6 and 71 CHF per hectare and year could be realised. However, the legal basis for allocating emission allowances from carbon sinks to forest owners has yet to be created. In view of the fact that the two chambers of Parliament refused the introduction of the Forests Act Revision Bill, it is not clear if and in what form this will be done. For the period after 2012, the rules will be renegotiated at the international level and it is expected that the carbon stored in harvested wood products will be taken into account. Accordingly, wood removed from the forest would no longer be automatically counted as a CO2 source in the emission balance.

Role of Zno Nanoparticles in Enhancing the Antimicrobial Property of Nitrocellulose Lacquer Wood Finish

2019 ◽  
Vol 12 (1) ◽  
pp. 91-98
Author(s):  
Shikhar Shukla ◽  
Shailendra Kumar ◽  
Ismita Nautiyal ◽  
Kishan Kumar V.S
Keyword(s):  
Antimicrobial Activity ◽  
Zno Nanoparticles ◽  
Antimicrobial Property ◽  
Economic Loss ◽  
Analysis Data ◽  
Wood Products ◽  
Mould Growth ◽  
Neem Oil ◽  
Nano Zno ◽  
Aesthetic Appearance

Background: Mould growth on coated wood products during shipment is the foremost apprehension for most of the wood industries in India. Well finished wood products tend to get deposited by staining moulds superficially in high humidity conditions during shipment. Though wood disfiguring fungi (stain moulds) normally have no significant effect on the mechanical properties of timber, they only affect the aesthetic appearance of the material without destructing the wood cell wall. This causes a huge economic loss to the manufacturer due to disfigurement of the appearance of wood products. Methods: The aim of this work is to test and enhance antimicrobial property of Nitrocellulose lacquer wood finish to prevent mould deposition on coated wood products. The work was carried out to screen and evaluate the antimicrobial activity of commercial Nitrocellulose lacquer. Several patents regarding antimicrobial activity of nano metal oxides have been visited. In order to enhance the mould resistance of this coating, its combinations with neem oil and ZnO nanoparticles were prepared and tested against the growth of staining moulds: Aspergillus niger and Penicillium sp. on the wood substrate of Melia dubia. The study was carried out for 500 hours under favorable conditions (Temperature and Relative Humidity (RH)) for the mould growth. The growth was analysed on the basis of surface area affected by stain moulds on coated wood samples. Results: The growth analysis data inferred that the ZnO nanoparticles had significant effect against the growth of stain moulds. The presence of ZnO nanoparticles increased the mould growth resistance of Nitrocellulose lacquer coating to a great extent compared to the ability of neem oil for the same. This finding demonstrates the potential use of nano ZnO for increasing the effectiveness of NC lacquer against mould growth without hampering its other properties. Conclusion: 1 % nano ZnO concentration in Nitrocellulose lacquer wood coating increased its efficacy against staining mould growth by 95 %.

scholarly journals The Wood Quality of Small-Leaved Lime (Tilia cordata Mill.) Trees in an Urban Area: A Pilot Study

Forests ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 420
Author(s):  
Benas Šilinskas ◽  
Aistė Povilaitienė ◽  
Gintautas Urbaitis ◽  
Marius Aleinikovas ◽  
Iveta Varnagirytė-Kabašinskienė
Keyword(s):  
Urban Area ◽  
Urban Areas ◽  
Wood Quality ◽  
Wood Products ◽  
Urban Trees ◽  
Measuring System ◽  
Forest Site ◽  
Tilia Cordata ◽  
Mean Values ◽  
Wood Development

This study performed a pilot evaluation of the wood quality—defined by a single parameter: dynamic modulus of elasticity (MOEdyn, N mm−2)—of small-leaved lime (Tilia cordata Mill.) trees in urban areas. A search of the literature revealed few studies which examined the specifics of tree wood development in urban areas. Little is known about the potential of wood from urban trees wood of their suitability for the timber industry. In this study, an acoustic velocity measuring system was used for wood quality assessment of small-leaved lime trees. The MOEdyn parameter was evaluated for small-leaved lime trees growing in two urban locations (along the streets, and in an urban park), with an additional sample of forest sites taken as the control. MOEdyn was also assessed for small-leaved lime trees visually assigned to different health classes. The obtained mean values of MOEdyn of 90–120-year old small-leaved lime trees in urban areas ranged between 2492.2 and 2715.8 N mm−2. For younger trees, the values of MOEdyn were lower in the urban areas than in the forest site. Otherwise, the results of the study showed that the small-leaved lime wood samples were of relatively good quality, even if the tree was classified as moderately damaged (which could cause a potential risk to the community). Two alternatives for urban tree management can be envisaged: (1) old trees could be left to grow to maintain the sustainability of an urban area until their natural death, or (2) the wood from selected moderately damaged trees could be used to create wood products, ensuring long-term carbon retention.

scholarly journals Increasing the Strength of the Glue Line in the Production of Thermally Modified Wood Paneling

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 253
Author(s):  
Ruslan Rushanovich Safin ◽  
Aigul Ravilevna Shaikhutdinova ◽  
Ruslan Khasanshin ◽  
Shamil Mukhametzyanov ◽  
Albina Safina
Keyword(s):  
Wood Products ◽  
Ultraviolet Rays ◽  
Surface Activation ◽  
Wood Block ◽  
Two Stage ◽  
Adhesion Properties ◽  
Wood Processing ◽  
Ultraviolet Treatment ◽  
Thermally Modified Wood ◽  
Modified Wood

This work is devoted to the study of the effect of ultraviolet rays for the surface activation of pine wood thermally modified at temperatures of 180−240 °C in order to increase the surface roughness, enhance the wettability of thermal wood and the adhesive strength of the glue in the production of wood block furniture panels. Studies were carried out to measure the contact angle of wettability of thermally modified wood samples of pine, as a result of which it was determined that the ultraviolet treatment process contributes to an increase in the adhesion properties of the surface layer of thermally modified wood by more than 13% due to the reactivity of ultraviolet rays to oxidize and degrade ligno-containing wood products. At the same time, the most active process of surface activation takes place during 60 min of ultraviolet irradiation of wood with a total irradiation of at least 125 W/cm2. It was revealed that the combined effect of two-stage wood processing, including preliminary volumetric thermal modification followed by surface ultraviolet treatment, causes an increase in the moisture resistance of glued wood products by 24%. So, if the strength of the glue seam when gluing natural wood samples after boiling decreased by 46%, then the samples that underwent two-stage processing showed a decrease only by 22%. In connection with the results obtained, an improved technology for the production of furniture boards for the manufacture of moisture-resistant wood products is proposed.

scholarly journals Piezoresistive bond lines for timber construction monitoring—experimental scale-up

2021 ◽  
Author(s):  
Christoph Winkler ◽  
Stefan Haase ◽  
Ulrich Schwarz ◽  
Markus Jahreis
Keyword(s):  
Electrical Contact ◽  
Scale Up ◽  
Strain Analysis ◽  
Conductive Filler ◽  
Bond Line ◽  
Wood Products ◽  
Image Correlation ◽  
Test Sequence ◽  
Strain Sensing ◽  
Electrically Conductive

AbstractSeveral laboratory studies and experiments have demonstrated the usability of polymer films filled with electrically conductive filler as piezoresistive material. Applied to adhesives, the glue lines of wood products can achieve multifunctional—thus bonding and piezoresistive/strain sensing—properties. Based on critical load areas in timber constructions, upscaled test setups for simplified load situations were designed, especially with regard to a stress-free electrical contact. In a second step, another upscaling was done to small glulam beams. Based on an experimental test sequence, the piezoresistive reactions as well as the behaviour until failure were analysed. The results show in all cases that a piezoresistive reaction of the multifunctionally bonded specimens was measurable, giving a difference in the extent of relative change. Additionally, measured phenomena like inverse piezoresistive reactions, electrical resistance drift and the absence of a piezoresistive reaction were discussed, based on additional strain analysis by digital image correlation. A model of macroscopic and microscopic strains influencing the piezoresistive reaction of the electrically conductive bond line in wood was used to explain all experimental results. Finally, a first scale-up of piezoresistive bond lines from laboratory samples to glulam beams was possible and successful.

Sign in / Sign up

Export Citation Format

Share Document