Labor in the aviation industry

2022 ◽  
pp. 55-76
Author(s):  
Heather McLaughlin ◽  
Colm Fearon
Keyword(s):  
Author(s):  
I.R. Antypes ◽  
◽  
V.V. Zaitsev ◽  

Currently, the use of composite materials is increasingly used in various areas of the national economy, including the aviation industry. The materials of this article are devoted to the study of the use of composite materials for the manufacture of aircraft landing gear in comparison with the traditionally used brand of steel. As a result of the work carried out, it was found that the slope made of carbon fiber showed a critical stress twice as high as its design made of 30xgsn2a steel. In addition, carbon plastics are superior to high-strength steel in terms of specific strength, stiffness, and tensile strength.


2020 ◽  
Vol 2020 (1) ◽  
pp. 34-52
Author(s):  
Rafał Szymański

AbstractThe article is in line with the contemporary interests of companies from the aviation industry. It describes thermoplastic material and inspection techniques used in leading aviation companies. The subject matter of non-destructive testing currently used in aircraft inspections of composite structures is approximated and each of the methods used is briefly described. The characteristics of carbon preimpregnates in thermoplastic matrix are also presented, as well as types of thermoplastic materials and examples of their application in surface ship construction. The advantages, disadvantages and limitations for these materials are listed. The focus was put on the explanation of the ultrasonic method, which is the most commonly used method during the inspection of composite structures at the production and exploitation stage. Describing the ultrasonic method, the focus was put on echo pulse technique and the use of modern Phased Array heads. Incompatibilities most frequently occurring and detected in composite materials with thermosetting and thermoplastic matrix were listed and described. A thermoplastic flat composite panel made of carbon pre-impregnate in a high-temperature matrix (over 300°C), which was the subject of the study, was described. The results of non-destructive testing (ultrasonic method) of thermoplastic panel were presented and conclusions were drawn.


2017 ◽  
Vol 2017 (1) ◽  
pp. 35-44
Author(s):  
Dawid Zadura

Abstract In the review below the author presents a general overview of the selected contemporary legal issues related to the present growth of the aviation industry and the development of aviation technologies. The review is focused on the questions at the intersection of aviation law and personal data protection law. Massive processing of passenger data (Passenger Name Record, PNR) in IT systems is a daily activity for the contemporary aviation industry. Simultaneously, since the mid- 1990s we can observe the rapid growth of personal data protection law as a very new branch of the law. The importance of this new branch of the law for the aviation industry is however still questionable and unclear. This article includes the summary of the author’s own research conducted between 2011 and 2017, in particular his audits in LOT Polish Airlines (June 2011-April 2013) and Lublin Airport (July - September 2013) and the author’s analyses of public information shared by International Civil Aviation Organization (ICAO), International Air Transport Association (IATA), Association of European Airlines (AEA), Civil Aviation Authority (ULC) and (GIODO). The purpose of the author’s research was to determine the applicability of the implementation of technical and organizational measures established by personal data protection law in aviation industry entities.


GIS Business ◽  
2019 ◽  
Vol 14 (6) ◽  
pp. 206-212
Author(s):  
Dr. D. Shoba ◽  
Dr. G. Suganthi

Employees and employers are facing issues in work life balance. It has become a difficult domain now, because the work needs have increased due to an increase in work pressure and complexities in handling the technology. As there are drastic changes in the rules and regulations in the work scenario of the aviation industry, it makes work life balance of employees difficult and set more hurdles. Hence there are many distractions and imbalances in the life of women employees in the aviation industry working across all levels. This work pressure is creating high level of hurdles in maintaining a harmonious job and family life, especially for female aviation employees. Data is collected from 50 female crew members working at Cochin International Airport. The objective of this study is to analyze the work life balance of working females of Cochin International Airport and its influence on their personal and specialized lives. The result of the study shows that the management should frame certain policies which will help employees to have the balance among their personal and expert lives.


2017 ◽  
Vol 742 ◽  
pp. 395-400 ◽  
Author(s):  
Florian Staab ◽  
Frank Balle ◽  
Johannes Born

Multi-material-design offers high potential for weight saving and optimization of engineering structures but inherits challenges as well, especially robust joining methods and long-term properties of hybrid structures. The application of joining techniques like ultrasonic welding allows a very efficient design of multi-material-components to enable further use of material specific advantages and are superior concerning mechanical properties.The Institute of Materials Science and Engineering of the University of Kaiserslautern (WKK) has a long-time experience on ultrasonic welding of dissimilar materials, for example different kinds of CFRP, light metals, steels or even glasses and ceramics. The mechanical properties are mostly optimized by using ideal process parameters, determined through statistical test planning methods.This gained knowledge is now to be transferred to application in aviation industry in cooperation with CTC GmbH and Airbus Operations GmbH. Therefore aircraft-related materials are joined by ultrasonic welding. The applied process parameters are recorded and analyzed in detail to be interlinked with the resulting mechanical properties of the hybrid joints. Aircraft derived multi-material demonstrators will be designed, manufactured and characterized with respect to their monotonic and fatigue properties as well as their resistance to aging.


Aerospace ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 152
Author(s):  
Micha Zoutendijk ◽  
Mihaela Mitici

The problem of flight delay prediction is approached most often by predicting a delay class or value. However, the aviation industry can benefit greatly from probabilistic delay predictions on an individual flight basis, as these give insight into the uncertainty of the delay predictions. Therefore, in this study, two probabilistic forecasting algorithms, Mixture Density Networks and Random Forest regression, are applied to predict flight delays at a European airport. The algorithms estimate well the distribution of arrival and departure flight delays with a Mean Absolute Error of less than 15 min. To illustrate the utility of the estimated delay distributions, we integrate these probabilistic predictions into a probabilistic flight-to-gate assignment problem. The objective of this problem is to increase the robustness of flight-to-gate assignments. Considering probabilistic delay predictions, our proposed flight-to-gate assignment model reduces the number of conflicted aircraft by up to 74% when compared to a deterministic flight-to-gate assignment model. In general, the results illustrate the utility of considering probabilistic forecasting for robust airport operations’ optimization.


Sign in / Sign up

Export Citation Format

Share Document