Cubic Cu2O nanoparticles decorated on TiO2 nanofiber heterostructure as an excellent synergistic photocatalyst for H2 production and sulfamethoxazole degradation

2021 ◽  
pp. 120221
Author(s):  
Karthikeyan Sekar ◽  
Chitiphon Chuaicham ◽  
Balakumar Vellaichamy ◽  
Wei Li ◽  
Wei Zhuang ◽  
...  
Keyword(s):  
H2 Production ◽  
Tio2 Nanofiber ◽  
Cu2o Nanoparticles

PERLAKUAN ETHYL METHANE SULFONATE (EMS) PADA ENTEROBACTER AEROGENES AY-2 DARI LIMBAH METAN FERMENTASI UNTUK PENINGKATAN PRODUKSI GAS HIDROGEN

2018 ◽  
Vol 5 (1) ◽  
Author(s):  
Mahyudin Abdul Rachman
Keyword(s):  
Metabolic Pathway ◽  
Acid Production ◽  
Double Mutant ◽  
Enterobacter Aerogenes ◽  
H2 Production ◽  
Hydrogen Gas ◽  
Survival Ratio ◽  
Ethyl Methane Sulfonate ◽  
Methane Sulfonate ◽  
Ethyl Methane

Enterobacter aerogenes AY-2 mutant is known for hydrogen gas producer which ws obtained from the sludge of methane fermentation and the yield is 1.5 fold higher than wildtype. Hydrogen gas production can be gain via NADH oxidation in anaerobic metabolic pathway by blocking organic acid production. Metabolic pathway can be changed by mutagenesis. Enterobacter aerogenes AY-2 mutated with ethyl methane sulfonate in logarithmic phase with consentration 10, 11, 12, 13, 14 and 15 μl/ml cell suspention during 120 minute. Mutation that result lowest survival ratio (0,01%) was 14 μl EMS/ml cell suspention is repeated with variation incubation time, 30, 60, 90 and 120 minute. 166 double mutant colony has been collected and choosen randomly. The choosen 43 colony was fermented in glycerol complex medium for determining ten double mutant with the highest H2 production. Double mutant AD-H43 is a highest H2 producer that increase 20% H2 production from AY-2 and has a decrease lactid acid production, 31% less from AY-2. Increasing H2 production in double mutant AD-H43 is caused by lactate dehydrogenase deffi cient.Keywords: Enterobacter aerogenes AY-2, ethyl methane sulfonate (EMS), H2 and methane sludge

Facile Synthesis of Cu2O nanoparticle-loaded Carbon Nanotubes Composite Catalysts for Reduction of 4-Nitrophenol

2020 ◽  
Vol 16 (4) ◽  
pp. 617-624 ◽  
Author(s):  
Yao Feng ◽  
Ran Wang ◽  
Juanjuan Yin ◽  
Fangke Zhan ◽  
Kaiyue Chen ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Mechanical Stability ◽  
Catalytic Reduction ◽  
High Surface ◽  
High Surface Area ◽  
Reduction Reaction ◽  
Cycle Performance ◽  
Simple Method ◽  
Composite Catalysts ◽  
Cu2o Nanoparticles

Background: 4-nitrophenol (4-NP) is one of the pollutants in sewage and harmful to human health and the environment. Cu is a non-noble metal with catalytic reduction effect on nitro compounds, and.has the advantages of simple preparation, abundant reserves, and low price. Carbon nanotubes (CNT) are widely used for substrate due to their excellent mechanical stability and high surface area. In this study, a simple method to prepare CNT-Cu2O by controlling different reaction time was reported. The prepared nanocomposites were used to catalyze 4-NP. Methods: CNTs and CuCl2 solution were put into a beaker, and then ascorbic acid and NaOH were added while continuously stirring. The reaction was carried out for a sufficiently long period of time at 60°C. The prepared samples were dried in a vacuum at 50°C for 48 h after washing with ethyl alcohol and deionized water. Results: Nanostructures of these composites were characterized by scanning electron microscope and transmission electron microscopy techniques, and the results at a magnification of 200 nanometers showed that Cu2O was distributed on the surface of the CNTs. In addition, X-ray diffraction was performed to further confirm the formation of Cu2O nanoparticles. The results of ultraviolet spectrophotometry showed that the catalytic effect of the compound on 4-NP was obvious. Conclusions: CNTs acted as a huge template for loading Cu2O nanoparticles, which could improve the stability and cycle performance of Cu2O. The formation of nanoparticles was greatly affected by temperature and the appropriate concentration, showing great reducibility for the 4-NP reduction reaction.

Metabolically versatile Rhodobacter sphaeroides as a robust biocatalyst for H2 production from lignocellulose-derived mix substrates

Fuel ◽  
2021 ◽  
Vol 302 ◽  
pp. 121108
Author(s):  
Jun Hu ◽  
Wenwen Wei ◽  
Qing Li ◽  
Wen Cao ◽  
Anlong Zhang ◽  
...  
Keyword(s):  
Rhodobacter Sphaeroides ◽  
H2 Production

Carbon–titanium dioxide (C/TiO2) nanofiber composites for chemical oxidation of emerging organic contaminants in reactive filtration applications

2021 ◽  
Vol 8 (3) ◽  
pp. 711-722
Author(s):  
Katherine E. Greenstein ◽  
Matthew R. Nagorzanski ◽  
Bailey Kelsay ◽  
Edgard M. Verdugo ◽  
Nosang V. Myung ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Water Treatment ◽  
Organic Contaminants ◽  
Membrane Filtration ◽  
Titanium Dioxide Nanoparticles ◽  
Chemical Oxidation ◽  
Tio2 Nanofiber ◽  
System P ◽  
Filtration System ◽  
Emerging Organic Contaminants

Electrospun carbon nanofibers with integrated titanium dioxide nanoparticles are used for water treatment in a photoactive membrane filtration system.

Decoration of multi-walled carbon nanotubes with CuO/Cu2O nanoparticles for selective sensing of H2S gas

2021 ◽  
pp. 130176
Author(s):  
Jae Hoon Bang ◽  
Ali Mirzaei ◽  
Myung Sik Choi ◽  
Seungmin Han ◽  
Ha Young Lee ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Multi Walled Carbon Nanotubes ◽  
Cu2o Nanoparticles ◽  
Walled Carbon Nanotubes

‘’Photo-electrochemical Water Splitting through Graphene-based ZnS Composites for H2 Production

2021 ◽  
pp. 115223
Author(s):  
Ahmed Hassan ◽  
Rabia Liaquat ◽  
Naseem Iqbal ◽  
Ghulam Ali ◽  
Xue Fan ◽  
...  
Keyword(s):  
Water Splitting ◽  
H2 Production ◽  
Electrochemical Water Splitting

scholarly journals Catalytic Conversion of n-C7 Asphaltenes and Resins II into Hydrogen Using CeO2-Based Nanocatalysts

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1301
Author(s):  
Oscar E. Medina ◽  
Jaime Gallego ◽  
Sócrates Acevedo ◽  
Masoud Riazi ◽  
Raúl Ocampo-Pérez ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Low Temperatures ◽  
Gaseous Mixture ◽  
H2 Production ◽  
The Other ◽  
Hydrogen Release ◽  
Catalytic Gasification ◽  
Three Samples ◽  
Main Decomposition ◽  
Catalytic Capacity

This study focuses on evaluating the volumetric hydrogen content in the gaseous mixture released from the steam catalytic gasification of n-C7 asphaltenes and resins II at low temperatures (<230 °C). For this purpose, four nanocatalysts were selected: CeO2, CeO2 functionalized with Ni-Pd, Fe-Pd, and Co-Pd. The catalytic capacity was measured by non-isothermal (from 100 to 600 °C) and isothermal (220 °C) thermogravimetric analyses. The samples show the main decomposition peak between 200 and 230 °C for bi-elemental nanocatalysts and 300 °C for the CeO2 support, leading to reductions up to 50% in comparison with the samples in the absence of nanoparticles. At 220 °C, the conversion of both fractions increases in the order CeO2 < Fe-Pd < Co-Pd < Ni-Pd. Hydrogen release was quantified for the isothermal tests. The hydrogen production agrees with each material’s catalytic activity for decomposing both fractions at the evaluated conditions. CeNi1Pd1 showed the highest performance among the other three samples and led to the highest hydrogen production in the effluent gas with values of ~44 vol%. When the samples were heated at higher temperatures (i.e., 230 °C), H2 production increased up to 55 vol% during catalyzed n-C7 asphaltene and resin conversion, indicating an increase of up to 70% in comparison with the non-catalyzed systems at the same temperature conditions.

Bifunctional single-atomic Mn sites for energy-efficient hydrogen production

Nanoscale ◽  
2021 ◽  
Author(s):  
Xianyun Peng ◽  
Junrong Hou ◽  
Yuying Mi ◽  
Jiaqiang Sun ◽  
Gaocan Qi ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Energy Saving ◽  
Hydrogen Evolution Reaction ◽  
Energy Efficient ◽  
Low Cost ◽  
Clean Energy ◽  
H2 Production ◽  
Energy Technology ◽  
Highly Active ◽  
Clean Energy Technology

Electrocatalytic hydrogen evolution reaction (HER) for H2 production is essential for future renewable and clean energy technology. Screening energy-saving, low-cost, and highly active catalysts efficiently, however, is still a grand...

Sign in / Sign up

Export Citation Format

Share Document