Termite species and functional groups in maize intercrop systems in Machakos County, Kenya

2021 ◽  
pp. 105881
Author(s):  
Nahashon Chege Kanyi ◽  
Hannah Karuri ◽  
Johnson O. Nyasani ◽  
Benson Mwangi
2015 ◽  
Vol 8 (2) ◽  
pp. 105-116 ◽  
Author(s):  
Luciane Kern Junqueira ◽  
Edmilson Ricardo Gonçalves ◽  
Lucas Manuel Cabral Teixeira

Termites are key components of soil fauna, playing an essential role in organic matter decomposition and nutrient cycling. However, they can cause significant economic losses in commercial plantations, such as sugar cane. Therefore, the correct identification of termite species is critical for pest control. Here, we evaluated the species richness, abundance and functional groups of termites in sugarcane plantations in 53 cities throughout the state of São Paulo, southeastern Brazil. We also analyzed the influence of macroclimatic variables on termite species distribution and functional groups. We found 22 taxa of two families, of which the most frequent species were Termitidae (96.51%). Within this family, Apicotermitinae had the highest frequency of occurrence (37.12%), followed by Termitinae (30.57%), Syntermitinae (27.95%), and Nasutitermitinae (0.8 %). The other family, Rhinotermitidae, had the lowest frequency (3.5%), being represented only by Heterotermes sulcatus Mathews. We classified Neocapritermes opacus Hagen (29.26%), Apicotermitinae sp.2 (24.89%), Cornitermes cumulans Kollar (13.10%), and Apicotermitinae sp.1 (6.99%) as common taxa. The remaining 18 species were classified as rare. The most common functional group was humus-feeders (37%), followed by wood-feeders (34%), grass-litter feeders (25%), and intermediate feeders (4%). Climate influenced the distribution of common species, humus-feeders and grass-litter feeders. Regarding the pest status of termites in sugar cane plantations, we suggest that the exasperated use of pesticide in the last decades has reduced the abundance of species considered pests (e.g. Heterotermes) and reinforce the importance of ecological approaches for determining the best pest control methods.Comunidades de Cupins em Cultivos de Cana-de-Açúcar no Estado de São Paulo: Uma Abordagem EcológicaResumo. Os cupins são importantes componentes da fauna de solo, atuando na decomposição da matéria orgânica e ciclagem de nutrientes. Porém, em cultivos de cana-de-açúcar, podem provocar perdas econômicas significativas. A correta identificação das espécies de cupins é um ponto crítico para o controle daquelas que adquiriram e/ou que podem atingir o status de praga. Este trabalho objetivou identificar a riqueza, a abundância e os grupos funcionais destes insetos em canaviais de 53 municípios do estado de São Paulo. Paralelamente, avaliou se as variáveis macroclimáticas influenciam a distribuição das comunidades de cupins e dos grupos funcionais. A riqueza obtida foi de 22 táxons. Da família Termitidae (96,51%), a maior frequência de ocorrência foi da subfamília Apicotermitinae (37,12%), seguindo-se Termitinae (30,57%), Syntermitinae (27,95%) e Nasutitermitinae (0,8%). A família Rhinotermitidae (3,5%) esteve representada apenas por Heterotermes sulcatus Mathews. Quatro táxons foram considerados comuns em canaviais, Neocapritermes opacus Hagen (29,26%), Apicotermitinae sp.2 (24,89%), Cornitermes cumulans Kollar (13,10%) e Apicotermitinae sp.1 (6,99%) e os 18 restantes foram classificados como raros. O grupo funcional mais frequente foi o dos humívoros (37%), seguido por xilófagos (34%), comedores de serrapilheira (25%) e intermediários (4%). O clima influenciou a distribuição das espécies comuns, bem como dos grupos funcionais dos humívoros e dos comedores de serrapilheira. Sugere-se que o uso intensivo de pesticidas nas últimas décadas reduziu a abundância de espécies até então consideradas praga em cana-de-açúcar (ex. Heterotermes), o que reforça a importância dos estudos ecológicos para a definição de métodos de controle mais adequados.


1971 ◽  
Author(s):  
Warren G. Bennis ◽  
Michael Beer ◽  
Gerald R. Pieters ◽  
Alan T. Hundert ◽  
Samuel H. Marcus ◽  
...  

2016 ◽  
Vol 19 (2) ◽  
pp. 93-100
Author(s):  
Lalita El Milla

Scaffolds is three dimensional structure that serves as a framework for bone growth. Natural materials are often used in synthesis of bone tissue engineering scaffolds with respect to compliance with the content of the human body. Among the materials used to make scafffold was hydroxyapatite, alginate and chitosan. Hydroxyapatite powder obtained by mixing phosphoric acid and calcium hydroxide, alginate powders extracted from brown algae and chitosan powder acetylated from crab. The purpose of this study was to examine the functional groups of hydroxyapatite, alginate and chitosan. The method used in this study was laboratory experimental using Fourier Transform Infrared (FTIR) spectroscopy for hydroxyapatite, alginate and chitosan powders. The results indicated the presence of functional groups PO43-, O-H and CO32- in hydroxyapatite. In alginate there were O-H, C=O, COOH and C-O-C functional groups, whereas in chitosan there were O-H, N-H, C=O, C-N, and C-O-C. It was concluded that the third material containing functional groups as found in humans that correspond to the scaffolds material in bone tissue engineering.


1996 ◽  
Vol 451 ◽  
Author(s):  
T. Shimizu ◽  
M. Murahara

ABSTRACTA Fluorocarbon resin surface was selectively modified by irradiation with a ArF laser beam through a thin layer of NaAlO2, B(OH)3, or H2O solution to give a hydrophilic property. As a result, with low fluence, the surface was most effectively modified with the NaAlO2 solution among the three solutions. However, the contact angle in this case changed by 10 degrees as the fluence changed only 1mJ/cm2. When modifying a large area of the surface, high resolution displacement could not be achieved because the laser beam was not uniform in displacing functional groups. Thus, the laser fluence was successfully made uniform by homogenizing the laser beam; the functional groups were replaced on the fluorocarbon resin surface with high resolution, which was successfully modified to be hydrophilic by distributing the laser fluence uniformly.


2019 ◽  
Author(s):  
Marharyta V. Laktsevich-Iskryk ◽  
Nastassia A. Varabyeva ◽  
Volha V. Kazlova ◽  
Vladimir N. Zhabinskii ◽  
Vladimir A. Khripach ◽  
...  

In this article, we report a photocatalytic protocol for the isomerization of 1,2-disubstituted cyclopropanols to linear ketones. The reaction proceeds <i>via</i> radical intermediates and tolerates various functional groups.


2019 ◽  
Author(s):  
Marharyta V. Laktsevich-Iskryk ◽  
Nastassia A. Varabyeva ◽  
Volha V. Kazlova ◽  
Vladimir N. Zhabinskii ◽  
Vladimir A. Khripach ◽  
...  

In this article, we report a photocatalytic protocol for the isomerization of 1,2-disubstituted cyclopropanols to linear ketones. The reaction proceeds <i>via</i> radical intermediates and tolerates various functional groups.


2020 ◽  
Author(s):  
Lei Liu ◽  
Wes Lee ◽  
Cassandra R. Youshaw ◽  
Mingbin Yuan ◽  
Michael B. Geherty ◽  
...  

The first iron-catalyzed three-component cross-coupling of unactivated olefins with alkyl halides and Grignard reagents is reported. The reaction operates under fast turnover frequency and tolerates a diverse range of sp2-hybridized nucleophiles, alkyl halides, and unactivated olefins bearing diverse functional groups to yield the desired 1,2-alkylarylated products with high regiocontrol. Further, we demonstrate that this protocol is amenable for the synthesis of new (hetero)carbocycles including tetrahydrofurans and pyrrolidines via a three-component radical cascade cyclization/arylation that forges three new C-C bonds.


2020 ◽  
Author(s):  
Zarko Boskovic ◽  
Manvendra Singh ◽  
Zachary Pearson ◽  
Nathan Garza

A collection of small molecules has been synthesized by composing photo-cycloaddition, C-H functionalization, and N-capping strategies. Multidimensional biological fingerprints of molecules comprising this collection have been recorded as changes in cell and organelle morphology. This untargeted, phenotypic approach allowed for a broad assessment of biological activity to be determined. Reproducibility and the magnitude of measured fingerprints revealed activity of several treatments. Reactive functional groups, such as imines, dominated the observed activity. Two non-reactive candidate compounds with distinct bioactivity fingerprints were identified, as well.


2020 ◽  
Author(s):  
Alexis Wolfel ◽  
Cecilia Inés Alvarez Igarzabal ◽  
Marcelo Ricardo Romero

<p>Design of materials with novel sensitivities and smart behaviour is important for the development of smart systems with automated responsiveness. We have recently reported the synthesis of hydrogels, cross-linked by <i>N,N'</i>-diallyltartardiamide (DAT). The covalent DAT-crosslinking points have vicinal diols which can be easily cleaved with periodate, generating valuable a-oxo-aldehyde functional groups, useful for further chemical modification. Based on those findings, we envisioned that a self-healable hydrogel could be obtained by incorporation of primary amino functional groups, from <a>2-aminoethyl methacrylate </a>hydrochloride (AEMA), coexisting with DAT into the same network. The a-oxo-aldehyde groups generated after the reaction with periodate would arise in the immediate environment of amine groups to form imine cross-links. For this purpose, DAT-crosslinked hydrogels were synthesized and carefully characterized. The cleavage of DAT-crosslinks with periodate promoted changes in the mechanical and swelling properties of the materials. As expected, a self-healing behavior was observed, based on the spontaneous formation of imine covalent bonds. In addition, we surprisingly found a combination of fast vicinal diols cleavage and a low speed self-crosslinking reaction by imine formation. Consequently, it was found a time-window in which a periodate-treated polymer was obtained in a transient liquid state, which can be exploited to choose the final shape of the material, before automated gelling. The singular properties attained on these hydrogels could be useful for developing sensors, actuators, among other smart systems.</p>


Sign in / Sign up

Export Citation Format

Share Document