A two stage batch adsorber design for methylene blue removal to minimize contact time

2006 ◽  
Vol 80 (4) ◽  
pp. 372-379 ◽  
Author(s):  
Mahmut Özacar ◽  
İ. Ayhan Şengil
Keyword(s):  
Methylene Blue ◽  
Contact Time ◽  
Two Stage ◽  
Methylene Blue Removal ◽  
Batch Adsorber Design

scholarly journals Two-Stage Adsorber Design for Methylene Blue Removal by Coconut Shell Activated Carbon

2021 ◽  
Vol 17 (6) ◽  
pp. 768-775
Author(s):  
Fadina Amran ◽  
Nur Fatiah Zainuddin ◽  
Muhammad Abbas Ahmad Zaini
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Contact Time ◽  
Coconut Shell ◽  
Two Stage ◽  
Methylene Blue Removal ◽  
Pseudo Second Order ◽  
Coconut Shell Activated Carbon ◽  
Langmuir Constants ◽  
Insight Into

The present work was aimed at evaluating the performance of two-stage adsorber for methylene blue removal by coconut shell activated carbon in minimizing the adsorbent mass and contact time. The Langmuir constants were used to evaluate the optimum mass, while the pseudo-second-order constants for contact time. Results show that the adsorbent mass can only be minimized by 0.01 % due to the high adsorbent affinity towards methylene blue, while the contact time has been optimized to 12.2 min at the studied conditions. The effect of adsorbent affinity in two-stage adsorber was analyzed to shed some light about its importance in the design of two-stage adsorber. The performance evaluation was also discussed to bring insight into wastewater treatment applications.

scholarly journals Response Surface Methodology Optimization of Methylene Blue Removal by Activated Carbon Derived from Foxtail Palm Tree Empty Fruit Bunch

2021 ◽  
Vol 4 (1) ◽  
pp. 25-30
Author(s):  
Farah Amni Daud ◽  
Norhisyam Ismail ◽  
Rozidaini Mohd Ghazi
Keyword(s):  
Methylene Blue ◽  
Response Surface Methodology ◽  
Activated Carbon ◽  
Response Surface ◽  
Contact Time ◽  
Palm Tree ◽  
Empty Fruit Bunch ◽  
Operating Variables ◽  
Methylene Blue Removal ◽  
Good Potential

The release of dyes in form of wastewater causes serious environmental problems such as retards photosynthesis, inhibit growth of aquatic biota by blocking out sunlight and utilizing dissolved oxygen. In this study, activated carbon derived from foxtail palm (Wodyetia bifurcata) empty fruit bunch (EFB) was used as an adsorbent to remove methylene blue in aqueous solution. The preparation process of activated carbon consisted of H2SO4 impregnation followed by carbonization at 300ºC for 24 hours. The optimization adsorption process was carried out using Response Surface Methodology (RSM) via Box-Behnken design. Three important operating variables namely dye concentration, contact time and adsorbent dosage were studied. The optimum conditions obtained were 100 ppm of methylene blue, 13 h of contact time and 2 g of activated carbon with the highest percentage of methylene blue removal of 99.9%. Based on the study, activated carbon derived from foxtail palm EFB showed good potential as an adsorbing agent.

scholarly journals Effect of Aeration Treatment on Methylene Blue Removal Using TiO2-Zeolite

2019 ◽  
Vol 2 ◽  
pp. 219-224
Author(s):  
Nanda Alzeta Pratama ◽  
Pedy Artsanti
Keyword(s):  
Methylene Blue ◽  
Fourier Transform ◽  
Contact Time ◽  
Fourier Transform Infrared ◽  
Absolute Ethanol ◽  
X Ray Diffraction ◽  
X Ray ◽  
Methylene Blue Removal ◽  
Ft Ir

Effect of aeration treatment on Methylene Blue (MB) removal using TiO2-Zeolite has been investigated. The TiO2-Zeolite was prepared by mixing activated zeolite and TiO2 in absolute ethanol. This composite was characterized using Fourier Transform Infrared (FT-IR) and X-Ray Diffraction (XRD). The MB removal was monitored spectrophotometrically. The effect of contact time, composite mass, and aeration treatment on MB removal was observed. Characterization results showed that there was interaction between TiO2 and SiO/AlO of zeolite. The observation of aeration treatment using oxygen exhibited significant improving on MB removal.

Removal of Methylene Blue and Orange-G from Waste Water Using Magnetic Biochar

2015 ◽  
Vol 14 (04) ◽  
pp. 1550009 ◽  
Author(s):  
N. M. Mubarak ◽  
Y. T. Fo ◽  
Hikmat Said Al-Salim ◽  
J. N. Sahu ◽  
E. C. Abdullah ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Contact Time ◽  
Agitation Speed ◽  
Adsorption Kinetic ◽  
Maximum Adsorption Capacity ◽  
Optimum Conditions ◽  
Magnetic Biochar ◽  
Design Expert ◽  
Orange G ◽  
Pseudo Second Order

The study on the removal of methylene blue (MB) and orange-G dyes using magnetic biochar derived from the empty fruit bunch (EFB) was carried out. Process parameters such as pH, adsorbent dosage, agitation speed and contact time were optimized using Design-Expert Software v.6.0.8. The statistical analysis reveals that the optimum conditions for the maximum adsorption of MB are at pH 2 and pH 10, dosage 1.0 g, and agitation speed and contact time of 125 rpm and 120 min respectively. While for orange-G, at pH 2, dosage 1.0 g, and agitation speed and contact time of 125 rpm and 120 min respectively. The maximum adsorption capacity of 31.25 mg/g and 32.36 mg/g for MB and orange-G respectively. The adsorption kinetic for both dyes obeyed pseudo-second order.

scholarly journals Application of modified green algae Nannochloropsis sp. as adsorbent in the simultaneous adsorption of Methylene Blue and Cu(II) cations in solution

2021 ◽  
Vol 31 (1) ◽  
Author(s):  
Buhani ◽  
Tri Agus Wijayanti ◽  
Suharso ◽  
Sumadi ◽  
Muslim Ansori
Keyword(s):  
Heavy Metals ◽  
Methylene Blue ◽  
Green Algae ◽  
Contact Time ◽  
Organic Dyes ◽  
Silica Matrix ◽  
Particle Coating ◽  
Adsorption Data ◽  
Magnetite Particles ◽  
Simultaneous Sorption

AbstractBiomass of algae is a very potent adsorbent for absorbing aqueous waste containing heavy metals and organic dyes. This study purposes to confirm the ability of adsorbents from green algae Nannochloropsis sp. modified with silica (ASN) and followed by coating magnetite particles (ASN-MPs) to absorb simultaneously the mixture of Methylene Blue (ME) and Cu(II) cations in aqueous solution. Simultaneous sorption of ME and Cu(II) cations to ASN and ASN-MPs was carried out by the batch method with the interaction pH condition 7, contact time 90 min, and initial concentrations of ME and Cu(II) cations (0.1–1.0 mM). Based on adsorption data, Cu(II) cations have a greater adsorption rate and capacity (qm) compared to ME at the same contact time and initial concentration. The adsorption capacity (qm) values of the bi-component ME and Cu(II) cation mixture in ASN and ASN-MPs were 1.39 × 10− 1 and 5.32 × 10− 1 mmol g− 1, respectively, with the binary Langmuir adsorption isotherm constant for Cu(II) cations greater than ME. Modified adsorbent from algae Nannochloropsis sp. with silica matrix and magnetite particle coating is an adsorbent that has a high effectiveness in the collective sorption of ME and Cu(II) cations. Therefore, these adsorbents can be used for the adsorption of cation mixtures of heavy metals and organic dyes that are cationic in solution.

Enhanced methylene blue removal efficiency of SnO2 thin film using sono-photocatalytic processes

2021 ◽  
Vol 117 ◽  
pp. 111116
Author(s):  
Mohamed Amine Bezzerrouk ◽  
Mohamed Bousmaha ◽  
Madani Hassan ◽  
Ahmed Akriche ◽  
Bachir Kharroubi ◽  
...  
Keyword(s):  
Thin Film ◽  
Methylene Blue ◽  
Removal Efficiency ◽  
Sno2 Thin Film ◽  
Methylene Blue Removal ◽  
Photocatalytic Processes
Sign in / Sign up

Export Citation Format

Share Document