scholarly journals Application of wheat bran based biomaterials and nano-catalyst in textile wastewater

Author(s):  
Woo Jin Chung ◽  
Jaehong Shim ◽  
Balasubramani Ravindran
2019 ◽  
Vol 18 (2) ◽  
pp. 152-157
Author(s):  
Zeng Xianlu ◽  
Han Fei ◽  
Zhong Yanmei

In order to harvest selenium-enriched fruiting body and spores of Ganoderma lingzhi and spent medium, G. lingzhi was cultivated in kudzu vine as substrate and the bio-transformation of selenite was evaluated. The growth medium consisted of Kudzu vine supplemented with 20% wheat bran or sawdust or none. The growth medium was supplemented with 0, 10, 20, 30, and 50 mg/kg of sodium selenite. We found a significant difference in spawn run speed, fruiting body and spore yields when Kudzu vine was supplemented with wheat bran or sawdust. However, when whole-kudzu vine was used alone as substrate, it resulted in a significantly lower spawn run speed, fruiting body, and spore yields compared with kudzu vine + sawdust substrate and kudzu vine + wheat bran substrate. The selenium content in fruiting body and spores increased with increasing sodium selenite supplementation and approximately equaled half of the selenium in the substrate. No selenite was detected in both the fruiting body and spores. However, in the spent medium when sodium selenite was supplemented at 10, 20, 30, 50 mg/kg, the residual selenite concentration decreased to 0.45, 0.72, 1.29, and 1.95 mg/kg, respectively, suggesting a higher selenite transformation (92.27–93.57%). In conclusion, if Ganoderma fruiting body and spores were to be harvested for human consumption, approximately 50 mg/kg selenite should be added to the growth substrate. On the other hand, if the spent medium was to be used as an organic selenium source, the optimal sodium selenite supplementation level would be 10 mg/kg.


2013 ◽  
Vol 8 (3-4) ◽  
pp. 469-478 ◽  
Author(s):  
Sandip S. Magdum ◽  
Gauri P. Minde ◽  
Upendra S. Adhyapak ◽  
V. Kalyanraman

The aim of this work was to optimize the biodegradation of polyvinyl alcohol (PVA) containing actual textile wastewater for a sustainable treatment solution. The isolated microbial consortia of effective PVA degrader namely Candida Sp. and Pseudomonas Sp., which were responsible for symbiotic degradation of chemical oxidation demand (COD) and PVA from desizing wastewater. In the process optimization, the maximum aeration was essential to achieve a high degradation rate, where as stirring enhances further degradation and foam control. Batch experiments concluded with the need of 16 lpm/l and 150 rpm of air and stirring speed respectively for high rate of COD and PVA degradation. Optimized process leads to 2 days of hydraulic retention time (HRT) with 85–90% PVA degradation. Continuous study also confirmed above treatment process optimization with 85.02% of COD and 90.3% of PVA degradation of effluent with 2 days HRT. This study gives environment friendly and cost effective solution for PVA containing textile wastewater treatment.


1999 ◽  
Vol 40 (8) ◽  
pp. 229-236 ◽  
Author(s):  
F. Fdz-Polanco ◽  
M. D. Hidalgo ◽  
M. Fdz-Polanco ◽  
P. A. García Encina

In the last decade Polyethylene Terephthalate (PET) production is growing. The wastewater of the “Catalana de Polimers” factory in Barcelona (Spain) has two main streams of similar flow rate, esterification (COD=30,000 mg/l) and textile (COD=4000 mg/l). In order to assess the anaerobic treatment viability, discontinuous and continuous experiments were carried out. Discontinuous biodegradability tests indicated that anaerobic biodegradability was 90 and 75% for esterification and textile wastewater. The textile stream revealed some tendency to foam formation and inhibitory effects. Nutrients, micronutrients and alkali limitations and dosage were determined. A continuous lab-scale UASB reactor was able to treat a mixture of 50% (v) esterification/textile wastewater with stable behaviour at organic loading rate larger than 12 g COD/l.d (0.3 g COD/g VSS.d) with COD removal efficiency greater than 90%. The start-up period was very short and the recuperation after overloading accidents was quite fast, in spite of the wash-out of solids. From the laboratory information an industrial treatment plant was designed and built, during the start-up period COD removal efficiencies larger than 90% and organic loading rate of 0.6 kg COD/kg VSS.d (5 kg COD/m3.d) have been reached.


1999 ◽  
Vol 40 (4-5) ◽  
pp. 99-105 ◽  
Author(s):  
A. Lopez ◽  
G. Ricco ◽  
R. Ciannarella ◽  
A. Rozzi ◽  
A. C. Di Pinto ◽  
...  

Among the activities appointed by the EC research-project “Integrated water recycling and emission abatement in the textile industry” (Contract: ENV4-CT95-0064), the effectiveness of ozone for improving the biotreatability of recalcitrant effluents as well as for removing from them toxic and/or inhibitory pollutants has been evaluated at lab-scale. Real membrane concentrates (pH=7.9; TOC=190 ppm; CDO=595 ppm; BOD5=0 ppm; Conductivity=5,000 μS/cm; Microtox-EC20=34%) produced at Bulgarograsso (Italy) Wastewater Treatment Plant by nanofiltering biologically treated secondary textile effluents, have been treated with ozonated air (O3conc.=12 ppm) over 120 min. The results have indicated that during ozonation, BOD5 increases from 0 to 75 ppm, whereas COD and TOC both decrease by about 50% and 30 % respectively. As for potentially toxic and/or inhibitory pollutants such as dyes, nonionic surfactants and halogenated organics, all measured as sum parameters, removals higher than 90% were achieved as confirmed by the complete disappearance of acute toxicity in the treated streams. The only ozonation byproducts searched for and found were aldehydes whose total amount continuously increased in the first hour from 1.2 up to 11.8 ppm. Among them, formaldehyde, acetaldehyde, glyoxal, propionaldehyde, and butyraldehyde were identified by HPLC.


Sign in / Sign up

Export Citation Format

Share Document