Effect of Anisotropic Pores on the Material Properties of Metakaolin Geopolymer Composites Incorporated with Corrugated Fiberboard and Rubber

Grain boundary segregation is the process by which solute elements in a material diffuse to the grain boundaries, become trapped there, and increase their local concentration at the boundary over that in the bulk. As a result of this process this local concentration of the segregant at the grain boundary can be many orders of magnitude greater than the bulk concentration of the segregant. The importance of this problem lies in the fact that grain boundary segregation can affect many material properties such as fracture, corrosion, and grain growth.One of the best ways to study grain boundary segregation is with Auger electron spectroscopy. This spectroscopy is an extremely surface sensitive technique. When it is used to study grain boundary segregation the sample must first be fractured intergranularly in the high vacuum spectrometer. This fracture surface is then the one that is analyzed. The development of scanning Auger spectrometers have allowed researchers to first image the fracture surface that is created and then to perform analyses on individual grain boundaries.

Download Full-text

Relationships Between Grain Boundary Structure and Material Properties

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s1431927600001550 ◽

1980 ◽

Vol 38 ◽

pp. 366-369

Author(s):

Brian Ralph ◽

Barlow Claire ◽

Nicola Ecob

Keyword(s):

Grain Boundary ◽

Material Properties ◽

Main Property ◽

Grain Structure ◽

Boundary Structure ◽

Grain Boundary Structure ◽

Property Changes

This brief review seeks to summarize some of the main property changes which may be induced by altering the grain structure of materials. Where appropriate an interpretation is given of these changes in terms of current theories of grain boundary structure, and some examples from current studies are presented at the end of this paper.

Download Full-text

Review for "Analyzing the changes in the brain material properties after a mild traumatic brain injury—A pilot study"

10.1002/eng2.12332/v2/review2 ◽

2020 ◽

Keyword(s):

Traumatic Brain Injury ◽

Brain Injury ◽

Pilot Study ◽

Mild Traumatic Brain Injury ◽

Material Properties ◽

Brain Material ◽

The Brain

Download Full-text

Cost-Effective UHPC for Accelerated Bridge Construction: Material Properties, Structural Elements, and Structural Applications

Journal of Bridge Engineering ◽

10.1061/(asce)be.1943-5592.0001660 ◽

2021 ◽

Vol 26 (2) ◽

pp. 04020117

Author(s):

Jingquan Wang ◽

Jiaping Liu ◽

Zhen Wang ◽

Tongxu Liu ◽

Jianzhong Liu ◽

...

Keyword(s):

Material Properties ◽

Construction Material ◽

Cost Effective ◽

Accelerated Bridge Construction ◽

Structural Elements ◽

Bridge Construction ◽

Structural Applications

Download Full-text

An evaluation of ECT sample height for small flute board grades and Box Manufacturer’s Certification compliance

TAPPI Journal ◽

10.32964/tj8.6.24 ◽

2009 ◽

Vol 8 (6) ◽

pp. 24-28

Author(s):

CORY JAY WILSON ◽

BENJAMIN FRANK

Keyword(s):

Compressive Strength ◽

Compressive Load ◽

Test Sample ◽

Test Methods ◽

Test Method ◽

Initial Development ◽

Sample Height ◽

Relationship Of ◽

The Relationship ◽

Corrugated Fiberboard

TAPPI test T811 is the specified method to ascertain ECT relative to box manufacturer’s certification compliance of corrugated fiberboard under Rule 41/ Alternate Item 222. T811 test sample heights were derived from typical board constructions at the time of the test method’s initial development. New, smaller flute sizes have since been developed, and the use of lighter weight boards has become more common. The T811 test method includes sample specifications for typical A-flute, B-flute, and C-flute singlewall (and doublewall and triplewall) structures, but not for newer thinner E-flute or F-flute structures. This research explores the relationship of ECT sample height to measured compressive load, in an effort to determine valid E-flute and F-flute ECT sample heights for use with the T811 method. Through this process, it identifies challenges present in our use of current ECT test methods as a measure of intrinsic compressive strength for smaller flute structures. The data does not support the use of TAPPI T 811 for ECT measurement for E and F flute structures, and demonstrates inconsistencies with current height specifi-cations for some lightweight B flute.

Download Full-text