Excellent thermal stability and mechanical properties of bulk nanostructured FeCoNiCu high entropy alloy

2022 ◽  
pp. 142670
Author(s):  
Yitan Zhang ◽  
Maowen Liu ◽  
Jingyong Sun ◽  
Guodong Li ◽  
Ruixiao Zheng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
High Entropy Alloy ◽  
Excellent Thermal Stability ◽  
High Entropy

scholarly journals Thermal Stability of MoNbTaVW High Entropy Alloy Thin Films

Coatings ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 941
Author(s):  
Ao Xia ◽  
Robert Franz
Keyword(s):  
Thin Films ◽  
Mechanical Properties ◽  
Thermal Stability ◽  
Solid Solution ◽  
Electrical Conductivity ◽  
High Entropy Alloy ◽  
Solid Solution Phase ◽  
Body Centered Cubic ◽  
High Entropy ◽  
Thermal Stability Of

Refractory high entropy alloys are an interesting material class because of their high thermal stability, decent electrical conductivity, and promising mechanical properties at elevated temperature. In the present work, we report on the thermal stability of body-centered cubic MoNbTaVW solid solution thin films that were synthesized by cathodic arc deposition. After vacuum annealing up to 1600 °C, the morphology, chemical composition, crystal structure, and electrical conductivity, as well as the mechanical properties, were analyzed. The observed body-centered cubic MoNbTaVW solid solution phase is stable up to 1500 °C. The evolution of electrical and mechanical properties due to the annealing treatment is discussed based on the observed structural changes of the synthesized thin films.

scholarly journals Nanoporous Quasi-High-Entropy Alloy Microspheres

Metals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 345 ◽  
Author(s):  
Lianzan Yang ◽  
Yongyan Li ◽  
Zhifeng Wang ◽  
Weimin Zhao ◽  
Chunling Qin
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Specific Surface Area ◽  
High Entropy Alloy ◽  
Face Centered Cubic ◽  
High Entropy ◽  
Hierarchical Porous

High-entropy alloys (HEAs) present excellent mechanical properties. However, the exploitation of chemical properties of HEAs is far less than that of mechanical properties, which is mainly limited by the low specific surface area of HEAs synthesized by traditional methods. Thus, it is vital to develop new routes to fabricate HEAs with novel three-dimensional structures and a high specific surface area. Herein, we develop a facile approach to fabricate nanoporous noble metal quasi-HEA microspheres by melt-spinning and dealloying. The as-obtained nanoporous Cu30Au23Pt22Pd25 quasi-HEA microspheres present a hierarchical porous structure with a high specific surface area of 69.5 m2/g and a multiphase approximatively componential solid solution characteristic with a broad single-group face-centered cubic XRD pattern, which is different from the traditional single-phase or two-phase solid solution HEAs. To differentiate, these are named quasi-HEAs. The synthetic strategy proposed in this paper opens the door for the synthesis of porous quasi-HEAs related materials, and is expected to promote further applications of quasi-HEAs in various chemical fields.

scholarly journals Tribological and Mechanical Properties of Multicomponent CrVTiNbZr(N) Coatings

Coatings ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 41
Author(s):  
Yin-Yu Chang ◽  
Cheng-Hsi Chung
Keyword(s):  
Mechanical Properties ◽  
Nitrogen Content ◽  
Adhesion Strength ◽  
Mechanical Performance ◽  
Bulk Material ◽  
High Entropy Alloy ◽  
Composition Gradient ◽  
Multilayered Structures ◽  
High Entropy ◽  
Alloy Target

Multi-element material coating systems have received much attention for improving the mechanical performance in industry. However, they are still focused on ternary systems and seldom beyond quaternary ones. High entropy alloy (HEA) bulk material and thin films are systems that are each comprised of at least five principal metal elements in equally matched proportions, and some of them are found possessing much higher strength than traditional alloys. In this study, CrVTiNbZr high entropy alloy and nitrogen contained CrVTiNbZr(N) nitride coatings were synthesized using high ionization cathodic-arc deposition. A chromium-vanadium alloy target, a titanium-niobium alloy target and a pure zirconium target were used for the deposition. By controlling the nitrogen content and cathode current, the CrNbTiVZr(N) coating with gradient or multilayered composition control possessed different microstructures and mechanical properties. The effect of the nitrogen content on the chemical composition, microstructure and mechanical properties of the CrVTiNbZr(N) coatings was investigated. Compact columnar microstructure was obtained for the synthesized CrVTiNbZr(N) coatings. The CrVTiNbZrN coating (HEAN-N165), which was deposited with nitrogen flow rate of 165 standard cubic centimeters per minute (sccm), exhibited slightly blurred columnar and multilayered structures containing CrVN, TiNbN and ZrN. The design of multilayered CrVTiNbZrN coatings showed good adhesion strength. Improvement of adhesion strength was obtained with composition-gradient interlayers. The CrVTiNbZrN coating with nitrogen content higher than 50 at.% possessed the highest hardness (25.2 GPa) and the resistance to plastic deformation H3/E*2 (0.2 GPa) value, and therefore the lowest wear rate was obtained because of high abrasion wear resistance.

Mechanical properties and microstructure of the Al0.3CoCrFeNiTi0.3 high entropy alloy under dynamic compression

2021 ◽  
Vol 812 ◽  
pp. 141147
Author(s):  
Xianzhe Zhong ◽  
Qingming Zhang ◽  
Jing Xie ◽  
Mingze Wu ◽  
Fuqing Jiang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Dynamic Compression ◽  
High Entropy Alloy ◽  
High Entropy
Sign in / Sign up

Export Citation Format

Share Document