Saturation magnetization as a function of temperature in Zn doped YIG nanoparticles

2021 ◽  
pp. 115054
Author(s):  
W.J. Sousa ◽  
Y. Guerra ◽  
R. Peña-Garcia ◽  
E. Padrón-Hernández
Keyword(s):  
Saturation Magnetization

FERROPERM

Alloy Digest ◽  
1993 ◽  
Vol 42 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Saturation Magnetization ◽  
Pure Iron ◽  
Magnetic Alloy ◽  
High Saturation Magnetization ◽  
High Temperature Annealing ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy

Abstract Ferroperm is a soft magnetic alloy that contains 1% aluminum. This addition of aluminum combined with high-temperature annealing increases permeability and reduces coercivity without decreasing the high-saturation magnetization of pure iron. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming. Filing Code: FE-99. Producer or source: NKK Corporation.

The Influence of Isothermal Annealing and Structural Defects on Properties of Amorphous Fe78Si11B11 with High Magnetization Saturation

2017 ◽  
Vol 68 (3) ◽  
pp. 478-482 ◽  
Author(s):  
Katarzyna Bloch
Keyword(s):  
Numerical Analysis ◽  
Thermal Treatment ◽  
Saturation Magnetization ◽  
Isothermal Annealing ◽  
Diffusion Processes ◽  
Structural Defects ◽  
High Saturation Magnetization ◽  
Magnetization Curves ◽  
Magnetization Saturation ◽  
Very High

This paper presents the results of numerical analysis of the primary magnetization curves, which were obtained under the assumptions of the theory of approach to ferromagnetic saturation described in by H. Kronm�ller. Test samples of the Fe78Si11B11 alloy were tape-shaped materials, which were subjected to isothermal annealing, not causing their crystallization. The investigated ribbons (tapes) were characterized by a very high saturation magnetization value of approximately 2T, which the thermal treatment has increased by about 10%. It was found that reason for the change of saturation magnetization of the investigated samples was the local rearrangement of atoms due to diffusion processes leading to the release of free volumes to the surface and combining of them into larger unstable defects called pseudodislocational dipoles.

The Influence of the Soaking Process on Magnetization Saturation and Coercivity Field of the Classic Amorphous Alloy Fe61Co10Y8Nb1B20.

2018 ◽  
Vol 69 (10) ◽  
pp. 2819-2822
Author(s):  
Marcin Nabialek
Keyword(s):  
Magnetic Field ◽  
Saturation Magnetization ◽  
Coercive Field ◽  
Thermal Treatments ◽  
Solid Samples ◽  
Magnetization Saturation ◽  
Transmission Geometry ◽  
Negative Effect ◽  
Coercivity Field ◽  
The Magnetic Field

This study presents the results of Mossbauer research and magnetic properties. The tests were carried out for amorphous Fe61Co10Y8Nb1B20 alloys produced in the form of strips with a thickness of approximately 35 mm. Mossbauer spectra were measured in transmission geometry for solid samples. Measurements were taken for samples in solidified state and after two heating processes. The first process was carried out at 700K and 60 minutes, the second at 720K and 210 minutes. For the samples prepared in this way, magnetization tests were performed as a function of the magnetic field strength. The values of saturation magnetization and the value of the coercive field were determined from these matrices. It was found that the performed thermal treatments had a negative effect on the value of saturation magnetization and change in the value of the coercive field.

Structural, Morphological and Magnetic Characterization of Sm-substituted Ni-Zn Ferrite

2020 ◽  
Vol 10 (2) ◽  
pp. 152-156 ◽  
Author(s):  
Muhammad Hanif bin Zahari ◽  
Beh Hoe Guan ◽  
Lee Kean Chuan ◽  
Afiq Azri bin Zainudin
Keyword(s):  
Magnetic Properties ◽  
Rare Earth ◽  
Saturation Magnetization ◽  
Sol Gel ◽  
Magnetic Behavior ◽  
Rare Earth Ions ◽  
Ion Concentration ◽  
Zn Ferrite ◽  
Auto Combustion ◽  
Combustion Technique

Background: Rare earth materials are known for its salient electrical insulation properties with high values of electrical resistivity. It is expected that the substitution of rare earth ions into spinel ferrites could significantly alter its magnetic properties. In this work, the effect of the addition of Samarium ions on the structural, morphological and magnetic properties of Ni0.5Zn0.5SmxFe2-xO4 (x=0.00, 0.02, 0.04, 0.06, 0.08, 0.10) synthesized using sol-gel auto combustion technique was investigated. Methods: A series of Samarium-substituted Ni-Zn ferrite nanoparticles (Ni0.5Zn0.5SmxFe2-xO4 where x=0.00, 0.02, 0.04, 0.06, 0.08, 0.10) were synthesized by sol-gel auto-combustion technique. Structural, morphological and magnetic properties of the samples were examined through X-Ray Diffraction (XRD), Field-Emission Scanning Electron Microscope (FESEM) and Vibrating Sample Magnetometer (VSM) measurements. Results: XRD patterns revealed single-phased samples with spinel cubic structure up to x= 0.04. The average crystallite size of the samples varied in the range of 41.8 – 85.6 nm. The prepared samples exhibited agglomerated particles with larger grain size observed in Sm-substituted Ni-Zn ferrite as compared to the unsubstituted sample. The prepared samples exhibited typical soft magnetic behavior as evidenced by the small coercivity field. The magnetic saturation, Ms values decreased as the Sm3+ concentration increases. Conclusion: The substituted Ni-Zn ferrites form agglomerated particles inching towards more uniform microstructure with each increase in Sm3+ substitution. The saturation magnetization of substituted samples decreases with the increase of samarium ion concentration. The decrease in saturation magnetization can be explained based on weak super exchange interaction between A and B sites. The difference in magnetic properties between the samples despite the slight difference in Sm3+ concentrations suggests that the properties of the NiZnFe2O4 can be ‘tuned’, depending on the present need, through the substitution of Fe3+ with rare earth ions.

The Structure and Magnetic Properties of NiZn-Ferrite Films Deposited by Magnetron Sputtering at Room Temperature

2013 ◽  
Vol 690-693 ◽  
pp. 1702-1706 ◽  
Author(s):  
Shuang Jun Nie ◽  
Hao Geng ◽  
Jun Bao Wang ◽  
Lai Sen Wang ◽  
Zhen Wei Wang ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Magnetron Sputtering ◽  
Saturation Magnetization ◽  
Room Temperature ◽  
Oxygen Flow ◽  
Flow Ratio ◽  
Study Results ◽  
Ferrite Thin Films ◽  
Ferrite Films

NiZn-ferrite thin films were deposited onto silicon and glass substrates by radio frequency magnetron sputtering at room temperature. The effects of the relative oxygen flow ratio on the structure and magnetic properties of the thin films were investigated. The study results reveal that the films deposited under higher relative oxygen flow ratio show a better crystallinity. Static magnetic measurement results indicated that the saturation magnetization of the films was greatly affected by the crystallinity, grain dimension, and cation distribution in the NiZn-ferrite films. The NiZn-ferrite thin films with a maximum saturation magnetization of 151 emucm-3, which is about 40% of the bulk NiZn ferrite, was obtained under relative oxygen flow ratio of 60%.

scholarly journals An advancement in the synthesis of unique soft magnetic CoCuFeNiZn high entropy alloy thin films

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Chokkakula L. P. Pavithra ◽  
Reddy Kunda Siri Kiran Janardhana ◽  
Kolan Madhav Reddy ◽  
Chandrasekhar Murapaka ◽  
Joydip Joardar ◽  
...  
Keyword(s):  
Thin Films ◽  
Saturation Magnetization ◽  
Functional Materials ◽  
Single Step ◽  
High Entropy Alloy ◽  
High Saturation Magnetization ◽  
Soft Magnetic ◽  
High Entropy ◽  
High Saturation ◽  
Electrochemical Approach

AbstractDiscovery of advanced soft-magnetic high entropy alloy (HEA) thin films are highly pursued to obtain unidentified functional materials. The figure of merit in current nanocrystalline HEA thin films relies in integration of a simple single-step electrochemical approach with a complex HEA system containing multiple elements with dissimilar crystal structures and large variation of melting points. A new family of Cobalt–Copper–Iron–Nickel–Zinc (Co–Cu–Fe–Ni–Zn) HEA thin films are prepared through pulse electrodeposition in aqueous medium, hosts nanocrystalline features in the range of ~ 5–20 nm having FCC and BCC dual phases. The fabricated Co–Cu–Fe–Ni–Zn HEA thin films exhibited high saturation magnetization value of ~ 82 emu/g, relatively low coercivity value of 19.5 Oe and remanent magnetization of 1.17%. Irrespective of the alloying of diamagnetic Zn and Cu with ferromagnetic Fe, Co, Ni elements, the HEA thin film has resulted in relatively high saturation magnetization which can provide useful insights for its potential unexplored applications.

Preparation and physical characterization of cobalt iron oxide magnetic nanoparticles loaded polyvinyl alcohol

2021 ◽  
pp. 089270572098557
Author(s):  
M Abu-Abdeen ◽  
O Saber ◽  
E Mousa
Keyword(s):  
Iron Oxide ◽  
Magnetic Nanoparticles ◽  
Polyvinyl Alcohol ◽  
Saturation Magnetization ◽  
Polymer Films ◽  
Magnetic Hysteresis ◽  
Thermal Method ◽  
Cobalt Iron Oxide ◽  
Cobalt Iron ◽  
Iron Oxide Magnetic Nanoparticles

A solvent thermal method which depends on a thermal process under critical temperature and pressure was used to prepare cobalt iron oxide magnetic nanoparticles with a molar ratio 2. The prepared particles were in the form of nanoparticles with diameter ranging from 5 to 10 nm and with amorphous structure. Magnetic hysteresis behavior with saturation magnetization 36.31 emu/g and coercivity 4 Oe were observed for the nanoparticles. Polyvinyl alcohol was loaded with different concentrations of cobalt iron oxide nanoparticles using casting technique. Hysteresis loops for the polymer films were observed and both the saturation magnetization and coercivity were increased from 0.36 to 16.03 emu/g and 115 to 293 Oe for samples containing 5 and 20 wt% of nanoparticles, respectively. The elastic modulus of films was increased from 2.7 to 4.9 GPa for unloaded and loaded samples with 20 wt%, respectively. The storage modulus of the polymer films was found to obey the percolation behavior.

scholarly journals Specific Absorption Rate Dependency on the Co2+ Distribution and Magnetic Properties in CoxMn1-xFe2O4 Nanoparticles

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1231
Author(s):  
Venkatesha Narayanaswamy ◽  
Imaddin A. Al-Omari ◽  
Aleksandr S. Kamzin ◽  
Bashar Issa ◽  
Huseyin O. Tekin ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Field Strength ◽  
Saturation Magnetization ◽  
Absorption Rate ◽  
Specific Absorption Rate ◽  
Ferrite Nanoparticles ◽  
Cofe2o4 Nanoparticles ◽  
Specific Absorption ◽  
Octahedral Sites ◽  
Mixed Ferrite

Mixed ferrite nanoparticles with compositions CoxMn1-xFe2O4 (x = 0, 0.2, 0.4, 0.6, 0.8, and 1.0) were synthesized by a simple chemical co-precipitation method. The structure and morphology of the nanoparticles were obtained by X-ray diffraction (XRD), transmission electron microscope (TEM), Raman spectroscopy, and Mössbauer spectroscopy. The average crystallite sizes decreased with increasing x, starting with 34.9 ± 0.6 nm for MnFe2O4 (x = 0) and ending with 15.0 ± 0.3 nm for CoFe2O4 (x = 1.0). TEM images show an edge morphology with the majority of the particles having cubic geometry and wide size distributions. The mixed ferrite and CoFe2O4 nanoparticles have an inverse spinel structure indicated by the splitting of A1g peak at around 620 cm−1 in Raman spectra. The intensity ratios of the A1g(1) and A1g(2) peaks indicate significant redistribution of Co2+ and Fe3+ cations among tetrahedral and octahedral sites in the mixed ferrite nanoparticles. Magnetic hysterics loops show that all the particles possess significant remnant magnetization and coercivity at room temperature. The mass-normalized saturation magnetization is highest for the composition with x = 0.8 (67.63 emu/g), while CoFe2O4 has a value of 65.19 emu/g. The nanoparticles were PEG (poly ethylene glycol) coated and examined for the magneto thermic heating ability using alternating magnetic field. Heating profiles with frequencies of 333.45, 349.20, 390.15, 491.10, 634.45, and 765.95 kHz and 200, 250, 300, and 350 G field amplitudes were obtained. The composition with x = 0.2 (Co0.2Mn0.8Fe2O4) with saturation magnetization 57.41 emu/g shows the highest specific absorption rate (SAR) value of 190.61 W/g for 10 mg/mL water dispersions at a frequency of 765.95 kHz and 350 G field strength. The SAR values for the mixed ferrite and CoFe2O4 nanoparticles increase with increasing concentration of particle dispersions, whereas for MnFe2O4, nanoparticles decrease with increasing the concentration of particle dispersions. SARs obtained for Co0.2Mn0.8Fe2O4 and CoFe2O4 nanoparticles fixed in agar ferrogel dispersions at frequency of 765.95 kHz and 350 G field strength are 140.35 and 67.60 W/g, respectively. This study shows the importance of optimizing the occupancy of Co2+ among tetrahedral and octahedral sites of the spinel system, concentration of the magnetic nanoparticle dispersions, and viscosity of the surrounding medium on the magnetic properties and heating efficiencies.

Sign in / Sign up

Export Citation Format

Share Document