scholarly journals Environmental evaluation of recycling technology and the impact of the transport of Aluminum cables

2019 ◽  
Vol 35 ◽  
pp. 103-111
Author(s):  
Guilhem Grimaud ◽  
Bertrand Laratte ◽  
Nicolas Perry
2015 ◽  
Vol 183 ◽  
pp. 291-307 ◽  
Author(s):  
Niklas von der Assen ◽  
André Sternberg ◽  
Arne Kätelhön ◽  
André Bardow

Potential environmental benefits have been identified for the utilization of carbon dioxide (CO2) as a feedstock for polyurethanes (PUR). CO2 can be utilized in the PUR supply chain in a wide variety of ways ranging from direct CO2 utilization for polyols as a PUR precursor, to indirect CO2 utilization for basic chemicals in the PUR supply chain. In this paper, we present a systematic exploration and environmental evaluation of all direct and indirect CO2 utilization options for flexible and rigid PUR foams. The analysis is based on an LCA-based PUR supply chain optimization model using linear programming to identify PUR production with minimal environmental impacts. The direct utilization of CO2 for polyols allows for large specific impact reductions of up to 4 kg CO2-eq. and 2 kg oil-eq. per kg CO2 utilized, but the amounts of CO2 that can be utilized are limited to 0.30 kg CO2 per kg PUR. The amount of CO2 utilized can be increased to up to 1.7 kg CO2 per kg PUR by indirect CO2 utilization in the PUR supply chain. Indirect CO2 utilization requires hydrogen (H2). The environmental impacts of H2 production strongly affect the impact of indirect CO2 utilization in PUR. To achieve optimal environmental performance under the current fossil-based H2 generation, PUR production can only utilize much less CO2 than theoretically possible. Thus, utilizing as much CO2 in the PUR supply chain as possible is not always environmentally optimal. Clean H2 production is required to exploit the full CO2 utilization potential for environmental impact reduction in PUR production.


2013 ◽  
Vol 850-851 ◽  
pp. 1360-1363 ◽  
Author(s):  
Jing Yi Ma ◽  
Xing Yu Chen ◽  
Wei Su

Garbage incineration is an effective minimization and resource processing methods, but there are no comparative analysises about the environmental impact of incineration processes. To investigate the environmental impacts of three typical MSW incineration processes, we modeled scenarios, calculated energy consumed and six aspects which classified as GWP, ODP, AP, EP, POCP and DUST. The classification results showed the value of the environment impact potential respectively. The impact potential of heat recover-dry absorption processes according to normalized results in descending order is GWP>EP>DUST>AP>POCP>ODP, in contrast the rank of heat recover-wet absorption and semidry processes is GWP>EP>AP>DUST>POCP>ODP, global warming impacts is the most significant penitential factor. The rank of impact potential according to weight factor in descending order is GWP>EP>DUST>AP>ODP>POCP. Dust potential became more significant. The weight factor of Dust is almost twice as much as that of AP. This is because there is a large gap between baseline level and the target level, the solid-waste are the focus of control in these years. In environmental terms, the environmental depletion index of heat recover-dry absorption process is lowest with minimal environmental impact and the heat recover-wet absorption process is the highest with largest environmental impact. The incineration with dry absorption program is the best environment-friendly process in term of environmental impact. Utilization of waste water and reducing total amount of water entering the system can effectively reduce the environmental implication for both HW and HS processes.


1999 ◽  
Vol 40 (2) ◽  
pp. 11-17 ◽  
Author(s):  
A. Tanik ◽  
B. Beler Baykal ◽  
I. E. Gonenc

Water is supplied in the Greater Istanbul Metropolitan Area from the surface water of six main reservoirs. The present land use in the catchment areas of the reservoirs indicates that the area devoted to agricultural activities and to forests and meadows varies between 73 and 97% and that only a minor percentage, 1-26%, is devoted to settlements and industries. In contrast to the land use profile, the current environmental evaluation of the catchment areas reveals that point sources dominate over diffuse sources. However, this trend is expected to be reversed in the near future, making diffuse sources and control of fertilizers and pesticides the most significant issue. Pollutant loads regarding pesticides and fertilizers are calculated from unit loads based on area. These pollutants are observed to have a negative impact on water quality in terms of eutrophication and toxicity. In this paper, the status of fertilizers and pesticides are addressed and some protective measures for reducing the impact of agricultural pollutants in the reservoirs are recommended.


2015 ◽  
Vol 666 ◽  
pp. 89-96 ◽  
Author(s):  
Efrosini Giama ◽  
Agis M. Papadopoulos

Sustainable building management is a complex problem which needs effective, adequate and suitable assessment tools and methods to address issues of incommensurability and complexity, always considering the prevailing environmental policies and legislation. Within the frame of this paper, green certifications building schemes have been described, compared to each other and evaluated, against the background of the standards provided by the International Organization for Standardization. Emphasis have been placed on information referring to construction materials environmental evaluation based on the Life Cycle Analysis methodology and the role of construction materials selection to green building certification schemes. Finally, the impact of green certification schemes on the construction market, mainly as a tool of energy management, has also been examined in relation to the absence of mandatory international standardization in sustainable building management.


2021 ◽  
Vol 11 (1) ◽  
pp. 72-85
Author(s):  
Cristina Rivero-Camacho ◽  
◽  
Antonio Ferreira-Sanchez

Within the commitments of the 2030 Agenda, the socio-economic objectives for a sustainable development of society as a whole, stand out, which propose minimizing the impact produced by all the activities of the Public Administration on the environment. Therefore, the creation and retrofitting of its infrastructures, needed for its operation and the services it provides, has a great impact. The goal of this work focuses on a methodological adaptation for the environmental evaluation of the works promoted by public organizations, quantifying and locating the sources of impact with the purpose of taking the measures to minimize them. For this, the footprint family, ecological, carbon, and water, are proposed as indicators, characterized by the simplicity of their message and the ease of their implementation in the construction sector, by controlling project costs. A case study is presented, the construction of an early childhood education center in the city of Madrid, for which the data needed for the calculation are presented and analyzed. The results reflect interesting information in terms of footprints, on the elements that must be controlled and improved in the project design, such as concrete and steel.


Author(s):  
Али Абуали ◽  
Ali Abuali ◽  
М. Перькова ◽  
M. Perkova ◽  
Мохаммед Хасан Аль-Савафи ◽  
...  

The interaction of architectural, urban planning activities and the natural environment is manifested at all hierarchical levels and its results need to be foreseen. The role of strategic environmental assessment is closely related to the concept of sustainability, since it is a tool that identifies the environmental impact of plans and programs implemented in the territory. The study examines the role of strategic environmental assessment in achieving sustainability of plans and programs at the international level, and concentrates on the problems of strategic environmental planning in Iraq. Strategic environmental assessment is a comprehensive process for assessing the impact of plans and programs on the environment. The previous studies have shown the effectiveness of using methods of strategic environmental assessment in promoting the comprehensive development of the territory; the ability of the public to participate in the assessment of environmental and social aspects of policies, plans, and programs. The purpose of the strategic environmental assessment (SEA) is to eliminate disproportions in the development of territories. A comparison of SEA and environmental impact assessment (EIA) has been carried out. In Iraq, strategic environmental assessment has been found to be a relatively new phenomenon. Its use in strategic planning of the territory will contribute to increasing the sustainability of development in Iraq, its application will be efficient in the country and its regions, and will ensure public participation in this process.


PeerJ ◽  
2020 ◽  
Vol 8 ◽  
pp. e9619
Author(s):  
Ana M. Meza-Salazar ◽  
Giovany Guevara ◽  
Lucimar Gomes-Dias ◽  
Carlos A. Cultid-Medina

Background Mining, agriculture and cattle production are activities that threaten the quality and quantity of water resources in the Colombian Andes. However, many drainage basins in this region have not been subjected to simultaneous evaluation of the impact these activities have on the density, diversity and composition of aquatic macroinvertebrates (AMI). The first two of these ecological variables are expected to decrease drastically from zones with no apparent impact towards areas with anthropogenic activity, which areas with mining will present the most impoverished AMI community. Methods We evaluated the density, diversity and composition dissimilarity of AMI in streams impacted by gold mining, agriculture and cattle production. Two reference streams were also studied. Six benthic samplings were conducted bimonthly (Feb 2014–Feb 2015) using a Surber net. Water samples were taken in order to make environmental evaluation among the aforementioned streams, including hydrological, physicochemical and bacteriological parameters (HPCB). Diversity was evaluated as the effective number of RTUs—recognizable taxonomic units—by comparing the richness, typical diversity, and effective number of the most abundant RTUs. Compositional dissimilarity was examined with nMDS and CCA analysis. Results A total of 7,483 organisms were collected: 14 orders, 42 families and 71 RTUs. Our prediction regarding the density and diversity of AMI (Reference > Cattle production > Agriculture > Mining) was partially fulfilled, since the agriculture-dominated stream presented a more impoverished AMI community than that of the gold mining stream. However, these streams presented lower diversity than the cattle production and reference streams, and the AMI density only differed significantly between one reference stream and the agriculture stream. The AMI composition in the agriculture-dominated stream clearly differed from that of the other streams. Discussion The observation of a more impoverished AMI community in agricultural production areas compared to those with mining or cattle production may reflect the importance of the remaining riparian vegetation, which was scarce at the stream with agricultural activity. Moreover, the low diversity, and mainly the reduced AMI richness, in the agriculture stream coincided with the absence of insect genera are intolerant to deterioration of the biological and physicochemical conditions of the water (e.g. Anacroneuria). Conclusions The results suggest that the local impact of agricultural activities may be of equal or greater magnitude than that of mining in terms of AMI density, diversity and composition, in the Colombian Andean riverscape. Future studies should systematically evaluate, throughout the annual cycle, the relative effects of the productive land use, the remaining native vegetation cover and the consequent changes in the HPCB parameters of the water on AMI communities in Colombian Andean basins.


2021 ◽  
Vol 1209 (1) ◽  
pp. 012080
Author(s):  
R Kovács ◽  
J Mandula

Abstract Roads exposed to continuous and heavy traffic often shown sight of damage which particularly extend to the underlying layers of roads. Due to the advantages of less raw materials and fossil fuel consumption, lower carbon footprint and the capability of pavement performance improvement enormous effect have been done in the western countries over the past decades. Thanks to the efforts of some construction companies in Slovakia our focus in this paper on the innovation technology of cold-in-place recycling is given. The presumption of success of this innovative technology is the introduction and use of the set of a powerful and interconnected machines. This technology allows the repair of deep defects, rutting and fatigue failure, which cannot be done by surface treatment with significant reducing the impact on the environment, material, and economical savings. Moreover, it enables the repair of deep defects, rutting and fatigue failure, which cannot be done by surface treatment. To promote the widespread application of cold-in-place recycling technology in practice and to monitor the progress of developments, this article has examined and discussed the basic aspects of the use of this technology based on laboratory analyzes of recycled material.


Sign in / Sign up

Export Citation Format

Share Document