The presence of traces of iron and copper ions during γ-irradiation does not result in clear mutational hot spots in the lacI gene

1999 ◽  
Vol 429 (1) ◽  
pp. 27-35 ◽  
Author(s):  
Carola A Wijker ◽  
M Vincent ◽  
M Lafleur
Keyword(s):  
Hot Spots ◽  
Copper Ions ◽  
Γ Irradiation ◽  
Laci Gene

Efficient monitoring of dosimetric behaviour for copper nanoparticles through studying its optical properties

2019 ◽  
Vol 107 (6) ◽  
pp. 523-529 ◽  
Author(s):  
Mohamad Bekhit ◽  
Asmaa Sobhy ◽  
Zakaria I. Ali ◽  
Sameh M. Gafar
Keyword(s):  
Copper Nanoparticles ◽  
Metal Ion ◽  
Copper Ions ◽  
Dose Range ◽  
Ion Concentration ◽  
Nanocomposite Films ◽  
Poly Vinyl Alcohol ◽  
High Dose ◽  
Γ Irradiation ◽  
Γ Radiation

Abstract A novel high-dose dosimeter based on γ radiation reduction of copper ions and formation of copper metal inside polymer matrix were investigated. γ radiation induced synthesis of copper nanoparticles (CuNPs) in poly vinyl alcohol films were studied by UV-Visible Spectrophotometer, X-ray diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR). The optical absorption spectra showed that the Cu/PVA nanocomposite films have surface plasmon resonance (SPR) of copper nanoparticles which depending on irradiation doses. Upon γ irradiation these films turns its color from faint blue to deep reddish brown depending on metal ion concentration. The XRD pattern and FTIR spectrum confirm the formation of the CuNPs. The response of Cu/PVA nanocomposite dosimeters depends on both the irradiation doses and concentration of copper precursor. The dose range for these films was from 50 to 650 kGy, revealing its important applications for high dose dosimetry. Cu/PVA nanocomposites films exhibit good post-irradiation stability in dark and light.

Synthesis of nanocrystalline Cu2 – xSe at room temperature by γ-irradiation

2000 ◽  
Vol 78 (9) ◽  
pp. 1143-1146
Author(s):  
Zhengping Qiao ◽  
Yi Xie ◽  
Jianguang Xu ◽  
Xianming Liu ◽  
Yingjie Zhu ◽  
...  
Keyword(s):  
Key Words ◽  
Room Temperature ◽  
Ph Value ◽  
Copper Ions ◽  
Copper Selenide ◽  
Γ Irradiation ◽  
Nonstoichiometric Compound ◽  
Sodium Selenosulfate

Ten nm nonstoichiometric compound Cu2 – xSe was firstly synthesized at room temperature by γ-irradiation, using sodium selenosulfate as the selenium source. The influence of the coordination of copper ions and the pH value of the solutions on the formation of Cu2 – xSe has been studied. The Cu2 – xSe was prepared here for x = 0.13.Key words: copper selenide, nanocrystalline, γ-irradiation.

A high-performance oil-free backing pump for electron microscopes

1978 ◽  
Vol 36 (1) ◽  
pp. 110-111
Author(s):  
G.K.W. Balkau ◽  
E. Bez ◽  
J.L. Farrant
Keyword(s):  
Molecular Weight ◽  
Electron Microscope ◽  
Hot Spots ◽  
High Performance ◽  
Carbonaceous Material ◽  
Contamination Rate ◽  
Low Molecular Weight ◽  
Principal Source ◽  
Rotary Pumps ◽  
Electron Microscopes

The earliest account of the contamination of electron microscope specimens by the deposition of carbonaceous material during electron irradiation was published in 1947 by Watson who was then working in Canada. It was soon established that this carbonaceous material is formed from organic vapours, and it is now recognized that the principal source is the oil-sealed rotary pumps which provide the backing vacuum. It has been shown that the organic vapours consist of low molecular weight fragments of oil molecules which have been degraded at hot spots produced by friction between the vanes and the surfaces on which they slide. As satisfactory oil-free pumps are unavailable, it is standard electron microscope practice to reduce the partial pressure of organic vapours in the microscope in the vicinity of the specimen by using liquid-nitrogen cooled anti-contamination devices. Traps of this type are sufficient to reduce the contamination rate to about 0.1 Å per min, which is tolerable for many investigations.

World Bank pinpoints disaster hot spots

Nature ◽  
2005 ◽  
Author(s):  
Deirdre Lockwood
Keyword(s):  
World Bank ◽  
Hot Spots

Modification of optical properties of PC-PBT/Cr2O3 and PC-PBT/CdS nanocomposites by gamma irradiation

2020 ◽  
Vol 92 (2) ◽  
pp. 20402
Author(s):  
Kaoutar Benthami ◽  
Mai ME. Barakat ◽  
Samir A. Nouh
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Band Gap ◽  
Color Difference ◽  
Band Gap Energy ◽  
Polybutylene Terephthalate ◽  
Γ Irradiation ◽  
Gap Energy ◽  
Vis Spectroscopy ◽  
Oxygen Atoms

Nanocomposite (NCP) films of polycarbonate-polybutylene terephthalate (PC-PBT) blend as a host material to Cr2O3 and CdS nanoparticles (NPs) were fabricated by both thermolysis and casting techniques. Samples from the PC-PBT/Cr2O3 and PC-PBT/CdS NCPs were irradiated using different doses (20–110 kGy) of γ radiation. The induced modifications in the optical properties of the γ irradiated NCPs have been studied as a function of γ dose using UV Vis spectroscopy and CIE color difference method. Optical dielectric loss and Tauc's model were used to estimate the optical band gaps of the NCP films and to identify the types of electronic transition. The value of optical band gap energy of PC-PBT/Cr2O3 NCP was reduced from 3.23 to 3.06 upon γ irradiation up to 110 kGy, while it decreased from 4.26 to 4.14 eV for PC-PBT/CdS NCP, indicating the growth of disordered phase in both NCPs. This was accompanied by a rise in the refractive index for both the PC-PBT/Cr2O3 and PC-PBT/CdS NCP films, leading to an enhancement in their isotropic nature. The Cr2O3 NPs were found to be more effective in changing the band gap energy and refractive index due to the presence of excess oxygen atoms that help with the oxygen atoms of the carbonyl group in increasing the chance of covalent bonds formation between the NPs and the PC-PBT blend. Moreover, the color intensity, ΔE has been computed; results show that both the two synthesized NCPs have a response to color alteration by γ irradiation, but the PC-PBT/Cr2O3 has a more response since the values of ΔE achieved a significant color difference >5 which is an acceptable match in commercial reproduction on printing presses. According to the resulting enhancement in the optical characteristics of the developed NCPs, they can be a suitable candidate as activate materials in optoelectronic devices, or shielding sheets for solar cells.

The Effect of Copper Ions on Clot Lysis Time in the Fibrinolytic Assay of Streptokinase

1965 ◽  
Vol 13 (02) ◽  
pp. 477-483
Author(s):  
Alwin B. Bogert
Keyword(s):  
Copper Ions ◽  
Borate Buffer ◽  
Fibrinolytic System ◽  
Clot Lysis ◽  
Distilled Water ◽  
Naturally Occurring ◽  
Lysis Time ◽  
Low Levels ◽  
Effect Of Copper ◽  
Clot Lysis Time

SummaryExperiments were conducted to determine why different lots of Borate Buffer reagent affect the clot lysis times obtained in the fibrinolytic assay of Streptokinase. Minerals naturally occurring in distilled water were screened individually to determine their influence on lysis. Copper was found to have a very pronounced effect in this regard on the fibrinolytic system in that low levels reduce the lysis time and high levels increase it.

The role of copper ions in hydrogen peroxide bleaching: Their origin, removal, and effect on pulp quality

TAPPI Journal ◽  
2012 ◽  
Vol 11 (7) ◽  
pp. 37-46 ◽  
Author(s):  
PEDRO E.G. LOUREIRO ◽  
SANDRINE DUARTE ◽  
DMITRY V. EVTUGUIN ◽  
M. GRAÇA V.S. CARVALHO
Keyword(s):  
Hydrogen Peroxide ◽  
Copper Ions ◽  
Peroxide Bleaching ◽  
Metals Removal ◽  
Peroxide Decomposition ◽  
Equipment Corrosion ◽  
And Performance ◽  
And Control ◽  
Main Effects

This study puts particular emphasis on the role of copper ions in the performance of hydrogen peroxide bleaching (P-stage). Owing to their variable levels across the bleaching line due to washing filtrates, bleaching reagents, and equipment corrosion, these ions can play a major role in hydrogen peroxide decomposition and be detrimental to polysaccharide integrity. In this study, a Cu-contaminated D0(EOP)D1 prebleached pulp was subjected to an acidic washing (A-stage) or chelation (Q-stage) before the alkaline P-stage. The objective was to understand the isolated and combined role of copper ions in peroxide bleaching performance. By applying an experimental design, it was possible to identify the main effects of the pretreatment variables on the extent of metals removal and performance of the P-stage. The acid treatment was unsuccessful in terms of complete copper removal, magnesium preservation, and control of hydrogen peroxide consumption in the following P-stage. Increasing reaction temperature and time of the acidic A-stage improved the brightness stability of the D0(EOP)D1AP bleached pulp. The optimum conditions for chelation pretreatment to maximize the brightness gains obtained in the subsequent P-stage with the lowest peroxide consumption were 0.4% diethylenetriaminepentaacetic acid (DTPA), 80ºC, and 4.5 pH.

Sign in / Sign up

Export Citation Format

Share Document