Damage accumulation in woven-fabric CFRP laminates under tensile loading: 2. Modelling the effect of damage on macro-mechanical properties

1999 ◽  
Vol 59 (1) ◽  
pp. 137-145 ◽  
Author(s):  
F. Gao ◽  
L. Boniface ◽  
S.L. Ogin ◽  
P.A. Smith ◽  
R.P. Greaves
Keyword(s):  
Mechanical Properties ◽  
Damage Accumulation ◽  
Tensile Loading ◽  
Woven Fabric ◽  
Cfrp Laminates

Damage accumulation in woven-fabric CFRP laminates under tensile loading: Part 1. Observations of damage accumulation

1999 ◽  
Vol 59 (1) ◽  
pp. 123-136 ◽  
Author(s):  
F. Gao ◽  
L. Boniface ◽  
S.L. Ogin ◽  
P.A. Smith ◽  
R.P. Greaves
Keyword(s):  
Damage Accumulation ◽  
Tensile Loading ◽  
Woven Fabric ◽  
Cfrp Laminates

scholarly journals Validation of Design of Regular Carbon Fabric Composite Plate with Woven Fabric using Tensile Loading

2021 ◽  
Vol 13 (4) ◽  
Author(s):  
Sushma D. Thorat ◽  
V. S. Mahajan
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Tensile Force ◽  
Tensile Loading ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Light Weight ◽  
Carbon Fabric ◽  
Fabric Composite ◽  
Carbon Fabrics

In many recent years the use of composite materials increases in many fields, for example agricultural uses, where these materials are characterized by good mechanical properties, tenacity and light weight. Among many other materials for the reinforcement of composites, technical fabrics are increasingly being used for the same purpose, especially from carbon fiber, which have good mechanical properties. During tensile stress these fabrics are elongated in the direction of tensile force, and at the same time they contract crosswise in relation to the action of the tensile force. In this Project the tensile properties of regular carbon fabrics and woven fabrics made from carbon fiber yarns were investigated. Static structural analysis of Regular carbon fabrics and woven fabrics base carbon fiber specimen will be done using ACP tool in ANSYS 19 software.

Environmental Effects on the Static and Fatigue Behaviours of Hemp Fibre under Tensile Loading

2015 ◽  
Vol 798 ◽  
pp. 410-418
Author(s):  
Anh Dung Ngo ◽  
Thu Nga Ho ◽  
Khalid Sefrioui Manar
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Failure Modes ◽  
Harmful Effect ◽  
Tensile Loading ◽  
Ambient Air ◽  
Absorption Mechanism ◽  
Hemp Fibre ◽  
Temperature And Humidity ◽  
Static Tensile

Environmental and loading mode effects on the tensile properties of Hemp fibre were investigated. At first, absorption of moisture into the fibre from ambient air and absorption of water into the fibre in immersion were studied. Then static and cyclic loadings tensile tests were conducted in various temperature and humidity conditions. It was found that, in ambient air (0% < RH < 80%) the moisture content of the studied fibre decreased with the increase of temperature conformed to the GAB model suggesting a multilayer absorption mechanism. On the contrary, for the fibre immersed in water, the moisture content increased with the increase of temperature. The activation of temperature on the diffusion of the water into the fibre by micro-pores and lumens jointly with the lack of possibility for the imprisoned water to evaporate might be the cause of this effect. Experimental results suggested that temperature and humidity could individually reduce the mechanical properties of Hemp fibre. Their interaction caused even a more harmful effect. Semi empirical and neural networks were used to predict the hygro-thermal effects on the mechanical properties under static tensile loading. Broken surfaces of the specimens were also examined showing different failure modes for static and cyclic tensile loadings. Finally, the value of the cellulose micro-fibrils angle (MFA) estimated using the static tensile stress-strain curve was 8.4o±1.9o.

scholarly journals Structure optimization of woven fabric composites for improvement of mechanical properties using a micromechanics model of woven fabric composites and a genetic algorithm

2021 ◽  
Vol 30 ◽  
pp. 263498332110061
Author(s):  
Gunyong Hwang ◽  
Dong Hyun Kim ◽  
Myungsoo Kim
Keyword(s):  
Mechanical Properties ◽  
Genetic Algorithm ◽  
Elastic Modulus ◽  
Fiber Composite ◽  
Woven Fabric ◽  
Cross Sectional ◽  
Micromechanics Model ◽  
Woven Fabric Composites ◽  
Fabric Composites ◽  
Out Of Plane

This research aims to optimize the mechanical properties of woven fabric composites, especially the elastic modulus. A micromechanics model of woven fabric composites was used to obtain the mechanical properties of the fiber composite, and a genetic algorithm (GA) was employed for the optimization tool. The structure of the fabric fiber was expressed using the width, thickness, and wave pattern of the fiber strands in the woven fabric composites. In the GA, the chromosome string consisted of the thickness and width of the fill and warp strands, and the objective function was determined to maximize the elastic modulus of the composite. Numerical analysis showed that the longitudinal mechanical properties of the strands contributed significantly to the overall elastic modulus of the composites because the longitudinal property was notably larger than the transverse property. Therefore, to improve the in-plane elastic modulus, the resulting geometry of the composites possessed large volumes of related strands with large cross-sectional areas and small strand waviness. However, the numerical results of the out-of-plane elastic modulus generated large strand waviness, which contributed to the fiber alignment in the out-of-plane direction. The findings of this research are expected to be an excellent resource for the structural design of woven fabric composites.

scholarly journals Experimental Study of Aged and Seriously Damaged RC Beams Strengthened Using CFRP Composites

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Ning Zhuang ◽  
Honghan Dong ◽  
Da Chen ◽  
Yeming Ma
Keyword(s):  
Mechanical Properties ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Rc Beams ◽  
Yield Load ◽  
Cfrp Laminates ◽  
Load Growth ◽  
Reinforced Polymer ◽  
Bonding Length ◽  
Damaged Beams

This paper presents results from experiments on aged and seriously damaged reinforced concrete (RC) beams strengthened with different arrangements of external carbon fiber-reinforced polymer (CFRP) laminates and end anchorages. Seven RC beams from an old bridge, measuring 250 × 200 × 2300 mm, were tested. All specimens were loaded to yield load to evaluate initial mechanical properties. Then, these seriously damaged specimens were repaired using different CFRP-reinforcing schemes and reloaded to failure. The yield load growth due to CFRP reinforcement ranged from 5% to 36%. Different parameters including CFRP dimension and position, bonding length, and end anchorage were investigated and facilitated conclusions on beam ductility, load-midspan deflection response, and failure mode. This research contributes to knowledge about the CFRP repair of aged and seriously damaged beams to ensure better performance in overloaded conditions.

scholarly journals Influence of preliminary thermal aging on the residual interlayer strength and staging of damage accumulation in structural carbon plastic

2021 ◽  
pp. 41-51
Author(s):  
D. S Lobanov ◽  
E. M Lunegova ◽  
A. I Mugatarov
Keyword(s):  
Mechanical Properties ◽  
Acoustic Emission ◽  
Damage Accumulation ◽  
Elevated Temperatures ◽  
Energy Parameter ◽  
Carbon Plastic ◽  
Diagnostic Systems ◽  
Static Tests ◽  
Interlayer Shear ◽  
Short Beam

Aging of composites is a pervasive problem that leads to mechanical properties degradation, reduced design life of a structure and premature accidental failure. The work is devoted to an experimental study of the preliminary temperature aging effect on the residual mechanical properties of structural CFRP. The joint use of test systems and systems for registration and analysis of acoustic emission signals was applied. The Short Beam Shear Test of CFRP specimens were carried out using the short beam method. The tests were carried out on universal electromechanical systems Instron 5882 and Instron 5965 in accordance with the recommendations of ASTM D2344. In the process of loading the samples were continuously recorded by using the acoustic emission signals system AMSY-6. A piezoelectric sensor with a frequency range of 300-800 kHz was used. The test and diagnostic systems were synchronized during the tests. In the course of the work the values of the interlayer shear strength were determined for the samples of CFRP. Typical types of the sample destruction are illustrated. When analyzing the change in the mechanical properties of the carbon fiber reinforced plastic from a temperature increase the critical values of temperatures were established in which a sharp decline in the strength and elastic characteristics of materials occurs due to an active destruction of the binder. The graphs of the energy parameter dependence and frequency characteristics of acoustic emission signals on time have been constructed and analyzed. The estimate of the processes of damage accumulation in composites is carried out. The change of the damage accumulation mechanisms was illustrated. The obtained results illustrate the effect of elevated temperatures and the duration of their impact on the mechanical behavior of structural CFRP specimens during the static tests for the interlayer shear.

scholarly journals CARBON FIBRE ALIGNMENT FOR REINFORCED COMPOSITES USING EMBROIDERY TECHNOLOGY

2021 ◽  
Vol 2021 ◽  
pp. 102-108
Author(s):  
J. Domenech-Pastor ◽  
P. Diaz-Garcia ◽  
D. Garcia
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Carbon Fibre ◽  
Carbon Fibers ◽  
Vertical Direction ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Reinforced Composites ◽  
Good Opportunity ◽  
Fibre Reinforced Composites

Composites are materials formed by the combination of two or more components that acquire better properties than the ones obtained by each component on its own. Composites have been widely used in the industry due to its light weight and good mechanical properties. To improve these properties several layers of reinforced material (e.g., carbon fibre) are overlapped which produce an increase in the fibre consumption. In this sense Tailored Fibre Placement (TFP) embroidery can offer good opportunity to reduce the consumption of reinforced fibre while improving the mechanical properties due to the alignment of the fibres in the effort direction. This study analyzes the performance of carbon fibre reinforced composites with Polyester resin made with TFP embroidery technology against flexural strength efforts and without using plain woven fabrics to demonstrate that the use of reinforcement fabrics in composites can be optimized by a curved alignment of the fibers. Two different structures were embroidered with TFP technology, one simulating a woven fabric with straight unidirectional alignment of fibres in horizontal and vertical direction, and a second structure made with curvilinear alignment of carbon fibers. After the study of the flexural mechanical properties an improvement of 18% was obtained in maximum flexural strength.

Sign in / Sign up

Export Citation Format

Share Document