Metal ion templated chemosensor for metal ions based on fluorescence quenching

2002 ◽  
Vol 85 (1-2) ◽  
pp. 86-89 ◽  
Author(s):  
Orhan Güney ◽  
Yaşar Yılmaz ◽  
Önder Pekcan
Keyword(s):  
Fluorescence Quenching ◽  
Metal Ions ◽  
Metal Ion

scholarly journals The nature of the slow metal ion-dependent conformational transition in bovine prothrombin

1979 ◽  
Vol 183 (3) ◽  
pp. 513-517 ◽  
Author(s):  
H C Marsh ◽  
M E Scott ◽  
R G Hiskey ◽  
K A Koehler
Keyword(s):  
Fluorescence Quenching ◽  
Metal Ions ◽  
Kinetic Parameters ◽  
Equilibrium Constant ◽  
Rate Constants ◽  
Metal Ion ◽  
Conformational Transition ◽  
The Other ◽  
Proline Residue ◽  
Structural Isomerization

Kinetic parameters characterizing the slow structural isomerization observed via metal ion-dependent intrinsic fluorescence quenching of bovine prothrombin Fragment 1 have been determined. From forward and reverse rate constants, an equilibrium constant of approx. 0.25 is calculated. This result is consistent with the hypothesis that there exists, in the absence of metal ions, an equilibrium between two forms of bovine Fragment 1, one of which can interact rapidly with Ca2+ and subsequently with phospholipid. The other form of Fragment 1 cannot interact with Ca2+ in a manner that yields a phospholipid-binding form of the protein. Interconversion of these two forms of Fragment 1 occurs and may involve the isomerization of a proline residue.

A novel label-free strategy for pathogenic DNA detection based on metal ion binding-induced fluorescence quenching of graphitic carbon nitride nanosheets

The Analyst ◽  
2017 ◽  
Vol 142 (14) ◽  
pp. 2617-2623 ◽  
Author(s):  
Yan Xiao ◽  
Yuhao Sheng ◽  
Jie Zhou ◽  
Miaomiao Chen ◽  
Wei Wen ◽  
...  
Keyword(s):  
Fluorescence Quenching ◽  
Metal Ions ◽  
Metal Ion ◽  
Carbon Nitride ◽  
Dna Detection ◽  
Ion Binding ◽  
Label Free ◽  
Metal Ion Binding ◽  
Fluorescence Sensing ◽  
Carbon Nitride Nanosheets

A novel label-free fluorescence sensing strategy based on g-C3N4 nanosheets and metal ions is designed for pathogenic DNA detection.

Use of agro-waste (Musa paradisiaca peels) as a sustainable biosorbent for toxic metal ions removal from contaminated water

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Equilibrium Concentration ◽  
Ion Concentration ◽  
Contaminated Water ◽  
Musa Paradisiaca ◽  
Percentage Removal ◽  
Adsorbent Dose

A study of removal of heavy metal ions from heavy metal contaminated water using agro-waste was carried out with Musa paradisiaca peels as test adsorbent. The study was carried by adding known quantities of lead (II) ions and cadmium (II) ions each and respectively into specific volume of water and adding specific dose of the test adsorbent into the heavy metal ion solution, and the mixture was agitated for a specific period of time and then the concentration of the metal ion remaining in the solution was determined with Perkin Elmer Atomic absorption spectrophotometer model 2380. The effect of contact time, initial adsorbate concentration, adsorbent dose, pH and temperature were considered. From the effect of contact time results equilibrium concentration was established at 60minutes. The percentage removal of these metal ions studied, were all above 90%. Adsorption and percentage removal of Pb2+ and Cd2+ from their aqueous solutions were affected by change in initial metal ion concentration, adsorbent dose pH and temperature. Adsorption isotherm studies confirmed the adsorption of the metal ions on the test adsorbent with good mathematical fits into Langmuir and Freundlich adsorption isotherms. Regression correlation (R2) values of the isotherm plots are all positive (>0.9), which suggests too, that the adsorption fitted into the isotherms considered.

The Binding and Viscometric Studies of Ni+2, Co+2 and Mn+2 Ions with Protein by Spectrometric and pH Metric Techniques

2019 ◽  
Vol 9 (2) ◽  
pp. 151-162
Author(s):  
Shveta Acharya ◽  
Arun Kumar Sharma
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Protein Molecule ◽  
Vital Role ◽  
Sufficient Evidence ◽  
Structural Requirement ◽  
Nickel Ions ◽  
Cobalt Ions ◽  
Lower Temperature ◽  
Specific Oxidation

Background: The metal ions play a vital role in a large number of widely differing biological processes. Some of these processes are quite specific in their metal ion requirements. In that only certain metal ions, in specific oxidation states, can full fill the necessary catalytic or structural requirement, while other processes are much less specific. Objective: In this paper we report the binding of Mn (II), Ni (II) and Co (II) with albumin are reported employing spectrophotometric and pH metric method. In order to distinguish between ionic and colloidal linking, the binding of metal by using pH metric and viscometric methods and the result are discussed in terms of electrovalent and coordinate bonding. Methods: The binding of Ni+2, Co+2 and Mn+2 ions have been studied with egg protein at different pH values and temperatures by the spectrometric technique. Results: The binding data were found to be pH and temperature dependent. The intrinsic association constants (k) and the number of binding sites (n) were calculated from Scatchard plots and found to be at the maximum at lower pH and at lower temperatures. Therefore, a lower temperature and lower pH offered more sites in the protein molecule for interaction with these metal ions. Statistical effects seem to be more significant at lower Ni+2, Co+2 and Mn+2 ions concentrations, while at higher concentrations electrostatic effects and heterogeneity of sites are more significant. Conclusion: The pH metric as well as viscometric data provided sufficient evidence about the linking of cobalt, nickel and manganese ions with the nitrogen groups of albumin. From the nature and height of curves in the three cases it may be concluded that nickel ions bound strongly while the cobalt ions bound weakly.

Efficient Preconcentration of Cu2+, Zn2+ and Fe3+ with an Agarose-Schiff Base Sorbent

2007 ◽  
Vol 72 (7) ◽  
pp. 908-916 ◽  
Author(s):  
Payman Hashemi ◽  
Hatam Hassanvand ◽  
Hossain Naeimi
Keyword(s):  
Schiff Base ◽  
Metal Ions ◽  
Metal Ion ◽  
Good Accuracy ◽  
Kinetic Studies ◽  
Sample Volume ◽  
Effects Of Ph ◽  
Glass Column ◽  
High Concentrations ◽  
Ph Range

Sorption and preconcentration of Cu2+, Zn2+ and Fe3+ on a salen-type Schiff base, 2,2'- [ethane-1,2-diylbis(nitrilomethylidyne)]bis(2-methylphenol), chemically immobilized on a highly crosslinked agarose support, were studied. Kinetic studies showed higher sorption rates of Cu2+ and Fe3+ in comparison with Zn2+. Half-times (t1/2) of 31, 106 and 58 s were obtained for sorption of Cu2+, Zn2+ and Fe3+ by the sorbent, respectively. Effects of pH, eluent concentration and volume, ionic strength, buffer concentration, sample volume and interferences on the recovery of the metal ions were investigated. A 5-ml portion of 0.4 M HCl solution was sufficient for quantitative elution of the metal ions from 0.5 ml of the sorbent packed in a 6.5 mm i.d. glass column. Quantitative recoveries were obtained in a pH range 5.5-6.5 for all the analytes. The volumes to be concentrated exceeding 500 ml, ionic strengths as high as 0.5 mol l-1, and acetate buffer concentrations up to 0.3 mol l-1 for Zn2+ and 0.4 mol l-1 for Cu2+ and Fe3+ did not have any significant effect on the recoveries. The system tolerated relatively high concentrations of diverse ions. Preconcentration factors up to 100 and detection limits of 0.31, 0.16 and 1.73 μg l-1 were obtained for Cu2+, Zn2+ and Fe3+, respectively, for their determination by a flame AAS instrument. The method was successfully applied to the metal ion determinations in several river water samples with good accuracy.

scholarly journals Detection of metal ions in biological systems: A review

2020 ◽  
Vol 39 (1) ◽  
pp. 231-246 ◽  
Author(s):  
Xian Zheng ◽  
Wenyu Cheng ◽  
Chendong Ji ◽  
Jin Zhang ◽  
Meizhen Yin
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Metabolic Regulation ◽  
Organic Dyes ◽  
Biological Systems ◽  
High Sensitivity ◽  
Transportation Energy ◽  
Material Transportation ◽  
High Fluorescence ◽  
Metal Ion Detection

Abstract Metal ions are widely present in biological systems and participate in many critical biochemical processes such as material transportation, energy conversion, information transmission and metabolic regulation, making them indispensable substance in our body. They can cause health problems when deficiency or excess occurs. To understand various metabolic processes and facilitate diseases diagnosis, it is very important to measure the content and monitor the distribution of metal ions in individual cells, tissues and whole organisms. Among the various methods for metal ion detection, fluorescent sensors with organic dyes have attracted tremendous attention due to many advantages such as high fluorescence quantum yield, facile modification approaches and biocompatibility in addition to operation ease, high sensitivity, fast detection speed, and real-time detection. This review summarizes the recent progress on the detection and imaging of the metal ions in biological systems including Na+, K+, Ca2+, Mg2+, Fe2+/Fe3+, Zn2+, and Cu2+ provides an opinion on remaining challenges to be addressed in this field.

Solution-based chemical pre-alkaliation of metal-ion battery cathode materials for increased capacity

2021 ◽  
Author(s):  
Roman Kapaev ◽  
Keith Stevenson
Keyword(s):  
Metal Ions ◽  
Cathode Materials ◽  
Metal Ion

For metal-ion batteries, the limited amount of metal ions that can be reversibly extracted from a cathode is a major problem, which leads to decreased capacity (mA h g−1) and...

scholarly journals Ag-Functionalized Si Nanowire Arrays Aligned Vertically for SERS Detection of Captured Heavy Metal Ions by BSA

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 685
Author(s):  
Ai-Huei Chiou ◽  
Jun-Luo Wei ◽  
Ssu-Han Chen
Keyword(s):  
Heavy Metal ◽  
Raman Scattering ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Great Promise ◽  
Ag Nps ◽  
Water Contact ◽  
Oh Groups ◽  
Si Nanowire

A novel surface-enhanced Raman scattering (SERS)-based probe to capture heavy metal ion (Zn2+) by bovine serum albumin (BSA) using Si-nanowire (SiNW) arrays with silver nanoparticles (AgNPs) was developed. A layer with AgNPs was deposited on the SiNW surface by RF magnetron sputtering for enhancement of SERS signals. Using a high-resolution transmission electron microscope (HRTEM), the observation reveals that the AgNP layer with depths of 30–75 nm was successfully deposited on SiNW arrays. The Ag peaks in EDS and XRD spectra of SiNW arrays confirmed the presence of Ag particles on SiNW arrays. The WCA observations showed a high affinity of the Ag–SiNW arrays immobilized with BSA (water contact angle (WCA) = 87.1°) and ZnSO4 (WCA = 8.8°). The results of FTIR analysis illustrate that the conjugate bonds exist between zinc sulfate (ZnSO4) and –OH groups/–NH groups of BSA. The resulting SiNWs/Ag NPs composite interfaces showed large Raman scattering enhancement for the capture of heavy metal ions by BSA with a detection of 0.1 μM. BSA and ZnSO4 conjugations, illustrating specific SERS spectra with high sensitivity, which suggests great promise in developing label-free biosensors.

scholarly journals A multicolor and ratiometric fluorescent sensing platform for metal ions based on arene–metal-ion contact

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Anna Kanegae ◽  
Yusuke Takata ◽  
Ippei Takashima ◽  
Shohei Uchinomiya ◽  
Ryosuke Kawagoe ◽  
...  
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Near Infrared ◽  
Molecular Design ◽  
Theoretical Calculations ◽  
Probe Design ◽  
One Pot ◽  
Fluorescent Sensing ◽  
Sensing Platform ◽  
Ratiometric Detection

AbstractDespite continuous and active development of fluorescent metal-ion probes, their molecular design for ratiometric detection is restricted by the limited choice of available sensing mechanisms. Here we present a multicolor and ratiometric fluorescent sensing platform for metal ions based on the interaction between the metal ion and the aromatic ring of a fluorophore (arene–metal-ion, AM, coordination). Our molecular design provided the probes possessing a 1,9-bis(2′-pyridyl)-2,5,8-triazanonane as a flexible metal ion binding unit attached to a tricyclic fluorophore. This architecture allows to sense various metal ions, such as Zn(II), Cu(II), Cd(II), Ag(I), and Hg(II) with emission red-shifts. We showed that this probe design is applicable to a series of tricyclic fluorophores, which allow ratiometric detection of the metal ions from the blue to the near-infrared wavelengths. X-ray crystallography and theoretical calculations indicate that the coordinated metal ion has van der Waals contact with the fluorophore, perturbing the dye’s electronic structure and ring conformation to induce the emission red-shift. A set of the probes was useful for the differential sensing of eight metal ions in a one-pot single titration via principal component analysis. We also demonstrate that a xanthene fluorophore is applicable to the ratiometric imaging of metal ions under live-cell conditions.

Sign in / Sign up

Export Citation Format

Share Document