scholarly journals Wall-induced translation of a rotating particle in a shear-thinning fluid

2021 ◽  
Vol 927 ◽  
Author(s):  
Ye Chen ◽  
Ebru Demir ◽  
Wei Gao ◽  
Y.-N. Young ◽  
On Shun Pak

Particle–wall interactions have broad biological and technological applications. In particular, some artificial microswimmers capitalize on their translation–rotation coupling near a wall to generate directed propulsion. Emerging biomedical applications of these microswimmers in complex biological fluids prompt questions on the impact of non-Newtonian rheology on their propulsion. In this work, we report some intriguing effects of shear-thinning rheology, a ubiquitous non-Newtonian behaviour of biological fluids, on the translation–rotation coupling of a particle near a wall. One particularly interesting feature revealed here is that the wall-induced translation by rotation can occur in a direction opposite to what might be intuitively expected for an object rolling on a solid substrate. We elucidate the underlying physical mechanism and discuss its implications on the design of micromachines and bacterial motion near walls in complex fluids.

Soft Matter ◽  
2021 ◽  
Author(s):  
Ke Qin ◽  
Zhiwei Peng ◽  
Ye Chen ◽  
Herve Nganguia ◽  
Lailai Zhu ◽  
...  

Some micro-organisms and artificial micro-swimmers propel at low Reynolds numbers (Re) via the interaction of their flexible appendages with the surrounding fluid. While their locomotion have been extensively studied with...


2017 ◽  
Vol 96 (6) ◽  
Author(s):  
Herve Nganguia ◽  
Kyle Pietrzyk ◽  
On Shun Pak

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 335
Author(s):  
Anna Yagodnitsyna ◽  
Alexander Kovalev ◽  
Artur Bilsky

Immiscible liquid–liquid flows in microchannels are used extensively in various chemical and biological lab-on-a-chip systems when it is very important to predict the expected flow pattern for a variety of fluids and channel geometries. Commonly, biological and other complex liquids express non-Newtonian properties in a dispersed phase. Features and behavior of such systems are not clear to date. In this paper, immiscible liquid–liquid flow in a T-shaped microchannel was studied by means of high-speed visualization, with an aim to reveal the shear-thinning effect on the flow patterns and slug-flow features. Three shear-thinning and three Newtonian fluids were used as dispersed phases, while Newtonian castor oil was a continuous phase. For the first time, the influence of the non-Newtonian dispersed phase on the transition from segmented to continuous flow is shown and quantitatively described. Flow-pattern maps were constructed using nondimensional complex We0.4·Oh0.6 depicting similarity in the continuous-to-segmented flow transition line. Using available experimental data, the proposed nondimensional complex is shown to be effectively applied for flow-pattern map construction when the continuous phase exhibits non-Newtonian properties as well. The models to evaluate an effective dynamic viscosity of a shear-thinning fluid are discussed. The most appropriate model of average-shear-rate estimation based on bulk velocity was chosen and applied to evaluate an effective dynamic viscosity of a shear-thinning fluid. For a slug flow, it was found that in the case of shear-thinning dispersed phase at low flow rates of both phases, a jetting regime of slug formation was established, leading to a dramatic increase in slug length.


2004 ◽  
Vol 59 (2) ◽  
pp. 417-424 ◽  
Author(s):  
Eric Lee ◽  
June-Kuo Ming ◽  
Jyh-Ping Hsu

Author(s):  
Xiao Xiong ◽  
Mohammad Azizur Rahman ◽  
Yan Zhang

A RANS based shear stress transportation (SST) model was employed in this study to validate experimental results from a recent literature, which investigated the fully developed turbulent flow for a non-Newtonian shear thinning fluid, containing drag reduction polymer additives in a horizontal concentric annulus (inner to outer radio θ = 0.4). The polymer concentration varied from 0.07% V/V to 0.12% V/V and three mass flow rates from 3.92 kg/s to 5.95 kg/s were analyzed. The viscous property of the fluid was modeled by the power-law model. Simulation performed with the commercial code of ANSYS-CFX indicated that the SST model with default model constants overestimated the turbulence statistics of shear thinning flow in the near wall region where y+<60. As an effort to improve simulation accuracy, one of the model constants α1 was tuned in this study for the first time. Simulation results obtained from the modified model showed better agreement with experimental data compared to those from the default one. The present study represents a successful benchmark task for simulating turbulent shear thinning flow in concentric annuli with modified turbulence model constants.


Sign in / Sign up

Export Citation Format

Share Document