Numerical Simulation of Particle-Gas Flow Through a Fixed Pipe, Using One-Way and Two-Way Coupling Methods

2016 ◽  
Vol 33 (2) ◽  
pp. 205-212 ◽  
Author(s):  
Z. Namazian ◽  
A. F. Najafi ◽  
S. M. Mousavian
Keyword(s):  
Numerical Simulation ◽  
Gas Flow ◽  
Volume Fraction ◽  
Fluid Velocity ◽  
Particle Volume Fraction ◽  
Stokes Number ◽  
Continuous Phase ◽  
Turbulent Pipe Flow ◽  
Particle Volume ◽  
Two Phase

AbstractA numerical simulation of the particle-gas flow in a vertical turbulent pipe flow was conducted. The main objective of the present article is to investigate the effects of dispersed phase (particles) on continuous phase (gas). In so doing, two general forms of Eulerian-Lagrangian approaches namely, one-way (when the fluid flow is not affected by the presence of the particles) and two-way (when the particles exert a feedback force on the fluid) couplings were used to describe the equations of motion of the two-phase flow. Gas-phase velocities which are within the order of magnitude as that of particles, volume fraction, and particle Stokes number were calculated and the results were subsequently compared with the available experimental data. The simulated results show that when the particles are added, the fluid velocity is attenuated. With an increase in particle volume fraction, particle mass loading and Stokes number, velocity attenuation also increases. Moreover, the results indicate that an increase in particle Stokes number reduces the special limited particle volume fraction, according to which one-way coupling method yields plausible results. The results have also indicated that the significance of particle fluid interaction is not merely a function of volume fraction and particle Stokes number.

Development and Validation of Two-Way Fluid-Particle Coupling in Turbulent Flows for a CFD Code

2013 ◽  
Author(s):  
Jianjun Xiao ◽  
Anatoly Svishchev ◽  
Thomas Jordan
Keyword(s):  
Experimental Data ◽  
Turbulent Flows ◽  
Gas Flow ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Continuous Phase ◽  
Particle Dispersion ◽  
Solid Particles ◽  
Particle Volume ◽  
Discrete Phase

A Lagrangian approach was used in CFD code GASFLOW to describe particle dispersion in turbulent flows. One-way coupling between fluid and particle is often used due to its simplicity of implementation. However, in case of higher particle volume fraction or mass loading in the continuous phase, one-way coupling is not sufficient to simulate the interaction between fluid and particles. For instance, the liquid droplets released by a spray nozzle in the nuclear power plant will lead to a strong gas entrainment, and consequently impact the gas flow field. When the volume fraction of the discrete phase is not negligible compared to the continuous phase, the interaction between the continuous fluid and dispersed phase becomes significant. Two-way momentum coupling between fluid and solid particles was developed in CFD code GASFLOW. The dynamics of the discrete particles was solved by an implicit algorithm to ensure the numerical stability. The contribution of all particles to a fluid cell was treated as the source term to the continuous phase which was solved with Arbitrary-Lagrangian-Eulerian (ALE) methodology. In order to verify and validate the code, the calculation results were then compared to theoretical results, predictions of other CFD codes and experimental data. Predictions compared favorably with the experimental data. It indicates that the effect of two-way coupling is significant when the volume fraction of discrete phase is not negligible. Two-way coupling of mass, energy and turbulence will be implemented in the future development of the GASFLOW code.

scholarly journals Investigation of Micro- and Nanosized Particle Erosion in a 90° Pipe Bend Using a Two-Phase Discrete Phase Model

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
M. R. Safaei ◽  
O. Mahian ◽  
F. Garoosi ◽  
K. Hooman ◽  
A. Karimipour ◽  
...  
Keyword(s):  
Particle Size ◽  
Volume Fraction ◽  
Fluid Velocity ◽  
Particle Volume Fraction ◽  
Particle Diameter ◽  
Maximum Pressure ◽  
Discrete Phase Model ◽  
Particle Volume ◽  
Threshold Velocity ◽  
Two Phase

This paper addresses erosion prediction in 3-D, 90° elbow for two-phase (solid and liquid) turbulent flow with low volume fraction of copper. For a range of particle sizes from 10 nm to 100 microns and particle volume fractions from 0.00 to 0.04, the simulations were performed for the velocity range of 5–20 m/s. The 3-D governing differential equations were discretized using finite volume method. The influences of size and concentration of micro- and nanoparticles, shear forces, and turbulence on erosion behavior of fluid flow were studied. The model predictions are compared with the earlier studies and a good agreement is found. The results indicate that the erosion rate is directly dependent on particles’ size and volume fraction as well as flow velocity. It has been observed that the maximum pressure has direct relationship with the particle volume fraction and velocity but has a reverse relationship with the particle diameter. It also has been noted that there is a threshold velocity as well as a threshold particle size, beyond which significant erosion effects kick in. The average friction factor is independent of the particle size and volume fraction at a given fluid velocity but increases with the increase of inlet velocities.

scholarly journals Flow topologies in bubble-induced turbulence: a direct numerical simulation analysis

2018 ◽  
Vol 857 ◽  
pp. 270-290 ◽  
Author(s):  
Josef Hasslberger ◽  
Markus Klein ◽  
Nilanjan Chakraborty
Keyword(s):  
Numerical Simulation ◽  
Direct Numerical Simulation ◽  
Turbulent Flows ◽  
Volume Fraction ◽  
Fluid Velocity ◽  
Small Scale ◽  
Flow Topology ◽  
Two Phase ◽  
Local Flow ◽  
Interface Curvature

This paper presents a detailed investigation of flow topologies in bubble-induced two-phase turbulence. Two freely moving and deforming air bubbles that have been suspended in liquid water under counterflow conditions have been considered for this analysis. The direct numerical simulation data considered here are based on the one-fluid formulation of the two-phase flow governing equations. To study the development of coherent structures, a local flow topology analysis is performed. Using the invariants of the velocity gradient tensor, all possible small-scale flow structures can be categorized into two nodal and two focal topologies for incompressible turbulent flows. The volume fraction of focal topologies in the gaseous phase is consistently higher than in the surrounding liquid phase. This observation has been argued to be linked to a strong vorticity production at the regions of simultaneous high fluid velocity and high interface curvature. Depending on the regime (steady/laminar or unsteady/turbulent), additional effects related to the density and viscosity jump at the interface influence the behaviour. The analysis also points to a specific term of the vorticity transport equation as being responsible for the induction of vortical motion at the interface. Besides the known mechanisms, this term, related to surface tension and gradients of interface curvature, represents another potential source of turbulence production that lends itself to further investigation.

scholarly journals Flow analysis of particulate suspension on an asymmetric peristaltic motion in a curved configuration with heat and mass transfer

2018 ◽  
Vol 19 (4) ◽  
pp. 401 ◽  
Author(s):  
Ahmed Zeeshan ◽  
Nouman Ijaz ◽  
Muhammad Mubashir Bhatti
Keyword(s):  
Volume Fraction ◽  
Biological Fluids ◽  
Particle Volume Fraction ◽  
Flow Analysis ◽  
Volumetric Flow Rate ◽  
Fluid Phase ◽  
Peristaltic Motion ◽  
Particle Volume ◽  
Two Phase ◽  
Peristaltic Pumping

This article addresses the influence of particulate-fluid suspension on asymmetric peristaltic motion through a curved configuration with mass and heat transfer. A motivation for the current study is that such kind of theory is helpful to examine the two-phase peristaltic motion between small muscles during the propagation of different biological fluids. Moreover, it is also essential in multiple applications of pumping fluid-solid mixtures by peristalsis, i.e., Chyme in small intestine and suspension of blood in arteriole. Long wavelength, as well as small Reynolds number, have been utilized to render the governing equations for particle and fluid phase. Exact solutions are presented for velocity (uf,p), temperature (θf,p) and concentration distributions (φf,p). All the parameters such as Prandtl number (Pr), particle volume fraction (C), suspension parameter (M1), curvature parameter (k), volumetric flow rate (Q), Schmidt number (Sc), phase difference (φ), Eckert number (Ec), and Soret number (Sr) discussed graphically for peristaltic pumping (Δp), pressure gradient (dp/dx), velocity (uf,p), temperature (θf,p) and concentration distributions (φf,p). The streamlines are also plotted with the aid of contour.

Vortex Simulation for Behavior of Solid Particles Falling in Air

2011 ◽  
Author(s):  
Hisanori Yagami ◽  
Tomomi Uchiyama
Keyword(s):  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Air Flow ◽  
Three Dimensional ◽  
Particle Diameter ◽  
Vortex Method ◽  
Solid Particles ◽  
Particle Volume ◽  
Two Phase ◽  
Spherical Region

The behavior of small solid particles falling in an unbounded air is simulated. The particles, initially arranged within a spherical region in a quiescent air, are made to fall, and their fall induces the air flow around them, resulting in the gas-particle two-phase flow. The particle diameter and density are 1 mm and 7.7 kg/m3 respectively. A three-dimensional vortex method proposed by one of the authors is applied. The simulation demonstrates that the particles are accelerated by the induced downward air flow just after the commencement of their fall. It also highlights that the particles are whirled up by a vortex ring produced around the downward air flow after the acceleration. The effect of the particle volume fraction at the commencement of the fall is also explored.

The 3-D Finite Element Analysis on Elastic-Plastic Micromechanical Response of the Particle Volume Fraction

2019 ◽  
Vol 962 ◽  
pp. 210-217
Author(s):  
Yong Ming Guo ◽  
Nozomi Fukae
Keyword(s):  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Three Dimensional ◽  
Particle Volume ◽  
Two Phase ◽  
Element Analysis ◽  
Elastic Plastic ◽  
Microstructural Parameters ◽  
Commercial Software Package ◽  
Properties Of Materials

It is well known that the properties of materials are a function of their microstructural parameters. The FEM is a good selection for studies of three-dimensional microstructure-property relationships. In this research, the elastic-plastic micromechanical response of the particle volume fraction of two-phase materials have been calculated using a commercial software package of the FEM, some new knowledges on the microstructure-property relationships have obtained.

scholarly journals Rheology of mobile sediment beds in laminar shear flow: effects of creep and polydispersity

2021 ◽  
Vol 932 ◽  
Author(s):  
Christoph Rettinger ◽  
Sebastian Eibl ◽  
Ulrich Rüde ◽  
Bernhard Vowinckel
Keyword(s):  
Friction Coefficient ◽  
Shear Flow ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Rheological Behaviour ◽  
Spherical Particles ◽  
Particle Volume ◽  
Two Phase ◽  
Transport Modelling ◽  
Static State

Classical scaling relationships for rheological quantities such as the $\mu (J)$ -rheology have become increasingly popular for closures of two-phase flow modelling. However, these frameworks have been derived for monodisperse particles. We aim to extend these considerations to sediment transport modelling by using a more realistic sediment composition. We investigate the rheological behaviour of sheared sediment beds composed of polydisperse spherical particles in a laminar Couette-type shear flow. The sediment beds consist of particles with a diameter size ratio of up to 10, which corresponds to grains ranging from fine to coarse sand. The data was generated using fully coupled, grain resolved direct numerical simulations using a combined lattice Boltzmann–discrete element method. These highly resolved data yield detailed depth-resolved profiles of the relevant physical quantities that determine the rheology, i.e. the local shear rate of the fluid, particle volume fraction, total shear and granular pressure. A comparison against experimental data shows excellent agreement for the monodisperse case. We improve upon the parameterization of the $\mu (J)$ -rheology by expressing its empirically derived parameters as a function of the maximum particle volume fraction. Furthermore, we extend these considerations by exploring the creeping regime for viscous numbers much lower than used by previous studies to calibrate these correlations. Considering the low viscous numbers of our data, we found that the friction coefficient governing the quasi-static state in the creeping regime tends to a finite value for vanishing shear, which decreases the critical friction coefficient by a factor of three for all cases investigated.

Research of Distribution and Dynamic Characteristic of Particle Group in the Structural Flow Passage

2012 ◽  
Vol 499 ◽  
pp. 271-276 ◽  
Author(s):  
Shi Ming Ji ◽  
J.Q. Zhong ◽  
Da Peng Tan ◽  
Y.W. Chi
Keyword(s):  
Dynamic Characteristic ◽  
Volume Fraction ◽  
Particle Volume Fraction ◽  
Turbulent Energy ◽  
Turbulence Energy ◽  
Particle Volume ◽  
Two Phase ◽  
Flow Passage ◽  
Structural Surface ◽  
Particle Group

Because of the liquid phase’s driving action, particles would be collided the surface and impacted with each other in the flow passage, the surface will be machined though the continuous action of impact force and friction force. The finishing results of structural surface is related to the collision frequency and the pressure, abrasion situation in different area of the structural surface can be analyzed obviously by investigating dynamic characteristic and distribution of particle group. Based on coupled wave theory of liquid-solid two phases flow, using mixture model which belongs to Euler-Euler multiphase flow model and realizable turbulence model, turbulence effects of liquid-solid two-phase flow in the wall is numerical simulated and some parameters such as turbulent velocity and turbulent energy are calculated with different particles concentration in the flow passage which has V-shaped texture and semicircular cross-section. The simulation results show that the disorder degree of turbulence can be improved by assembling V-shaped constrained component, because V-shaped passage is benefit of eddy current’s generation. As the concentration of particles being enhanced, the velocity of particle would be increased in a certain range, turbulence energy reduces gradually, fluctuation margin of particle volume fraction is smaller and smaller, and curves of every kind of parameters change as continuous oscillation, area of surface corresponded with crest of the curve. The concentration of particles should be selected properly and different particles distribution and finishing performance would be obtained with different particles concentration.

scholarly journals Hydrodynamics Interactions of Metachronal Waves on Particulate-Liquid Motion through a Ciliated Annulus: Application of Bio-Engineering in Blood Clotting and Endoscopy

Symmetry ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 532 ◽  
Author(s):  
Muhammad Mubashir Bhatti ◽  
Asmaa F. Elelamy ◽  
Sadiq M. Sait ◽  
Rahmat Ellahi
Keyword(s):  
Newtonian Fluid ◽  
Volume Fraction ◽  
Fluid Model ◽  
Flow Behavior ◽  
Blood Clot ◽  
Fluid Velocity ◽  
Particle Volume Fraction ◽  
Particle Volume ◽  
Entire Cross Section ◽  
Bio Engineering

This study deals with the mass transport phenomena on the particle-fluid motion through an annulus. The non-Newtonian fluid propagates through a ciliated annulus in the presence of two phenomenon, namely (i) endoscopy, and (ii) blood clot. The outer tube is ciliated. To examine the flow behavior we consider the bi-viscosity fluid model. The mathematical modeling has been formulated for small Reynolds number to examine the inertia free flow. The purpose of this assumption is that wavelength-to-diameter is maximal, and the pressure could be considerably uniform throughout the entire cross-section. The resulting equations are analytically solved, and exact solutions are given for particle- and fluid-phase profiles. Computational software Mathematica has been used to evaluate both the closed-form and numerical results. The graphical behavior across each parameter has been discussed in detail and presented with graphs. The trapping mechanism is also shown across each parameter. It is noticed clearly that particle volume fraction and the blood clot reveal converse behavior on fluid velocity; however, the velocity of the fluid reduced significantly when the fluid behaves as a Newtonian fluid. Schmidt and Soret numbers enhance the concentration mechanism. Furthermore, more pressure is required to pass the fluid when the blood clot appears.

Sign in / Sign up

Export Citation Format

Share Document