Homogeneous and Heterogeneous Reactions Effects in Flow with Joule Heating and Viscous Dissipation

2016 ◽  
Vol 33 (1) ◽  
pp. 77-86 ◽  
Author(s):  
T. Hayat ◽  
Z. Hussain ◽  
M. Farooq ◽  
A. Alsaedi
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Viscous Dissipation ◽  
Joule Heating ◽  
Heterogeneous Reaction ◽  
Nonlinear Partial Differential Equations ◽  
Heterogeneous Reactions ◽  
Temperature Fields ◽  
Reaction Parameter ◽  
Homogeneous And Heterogeneous Reactions

AbstractThis work examines the magnetohydrodynamic (MHD) flow of second grade fluid due to a stretching cylinder with viscous dissipation. Advance heat transfer technique namely the Newtonian heating is employed to explore the characteristics of heat transfer phenomenon in the presence of Joule heating. Mass transfer is discussed with the combination of both homogeneous and heterogeneous reactions. Diffusion coefficients of species A and B are considered of the same size. Heat production due to chemical reaction is assumed negligible. Appropriate transformations are employed to convert the nonlinear partial differential equations to the nonlinear ordinary differential equations. Convergent solutions of momentum, energy and concentration equations are developed. Characteristics of different involved parameters on the velocity and temperature fields are shown graphically. Numerical values of skin friction coefficient and Nusselt number are computed and analyzed. Higher values of homogeneous reaction parameter results in the reduction of concentration profile while opposite behavior is observed for heterogeneous reaction parameter.

Heat transfer over an unsteady stretching surface with prescribed heat flux

2008 ◽  
Vol 86 (6) ◽  
pp. 853-855 ◽  
Author(s):  
A Ishak ◽  
R Nazar ◽  
I Pop
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Differential Equations ◽  
Nonlinear Partial Differential Equations ◽  
Method Comparison ◽  
Temperature Fields ◽  
Stretching Surface ◽  
Keller Box Method ◽  
Unsteady Stretching Surface ◽  
Layer Flow

The unsteady laminar boundary-layer flow over a continuously stretching surface in a viscous and incompressible quiescent fluid is studied. The unsteadiness in the flow and temperature fields is caused by the time dependence of the stretching velocity and the surface heat flux. The nonlinear partial differential equations of continuity, momentum, and energy, with three independent variables, are reduced to nonlinear ordinary differential equations, before they are solved numerically by the Keller-box method. Comparison with available data from the open literature as well as the exact solution for the steady-state case of the present problem is made, and found to be in good agreement. Effects of the unsteadiness parameter and Prandtl number on the flow and heat transfer characteristics are thoroughly examined.PACS No.: 47.15.Cb

Hall effect on MHD flow and heat transfer of nanofluids over a stretching wedge in the presence of velocity slip and Joule heating

Open Physics ◽  
2013 ◽  
Vol 11 (12) ◽  
Author(s):  
Xiaohong Su ◽  
Liancun Zheng
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Hall Effect ◽  
Joule Heating ◽  
Volume Fraction ◽  
Wedge Angle ◽  
Mhd Flow ◽  
Velocity Slip ◽  
Temperature Fields ◽  
Flow And Heat Transfer

AbstractThis paper deals with the boundary layer flow and heat transfer of nanofluids over a stretching wedge with velocity-slip boundary conditions. In this analysis, Hall effect and Joule heating are taken into consideration. Four different types of water-base nanofluids containing copper (Cu), silver (Ag), alumina (Al2O3), and titania (TiO2) nanoparticles are analyzed. The partial differential equations governing the flow and temperature fields are converted into a system of nonlinear ordinary differential equations using a similarity transformation. The resulting similarity equations are then solved by using the shooting technique along with the fourth order Runge-Kutta method. The effects of types of nanoparticles, the volume fraction of nanoparticles, the magnetic parameter, the Hall parameter, the wedge angle parameter, and the velocityslip parameter on the velocity and temperature fields are discussed and presented graphically, respectively.

Finite element analysis of magnetohydrodynamic flow over flat surface moving in parallel free stream with viscous dissipation and Joule heating

2018 ◽  
Vol 35 (4) ◽  
pp. 1675-1693 ◽  
Author(s):  
Santosh Chaudhary ◽  
Mohan Kumar Choudhary
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Finite Element Method ◽  
Finite Element ◽  
Differential Equations ◽  
Viscous Dissipation ◽  
Joule Heating ◽  
Flat Surface ◽  
Content Type ◽  
Flow And Heat Transfer

PurposeThe purpose of this paper is to investigate two-dimensional viscous incompressible magnetohydrodynamic boundary layer flow and heat transfer of an electrically conducting fluid over a continuous moving flat surface considering the viscous dissipation and Joule heating.Design/methodology/approachSuitable similarity variables are introduced to reduce the governing nonlinear boundary layer partial differential equations to ordinary differential equations. A numerical solution of the resulting two-point boundary value problem is carried out by using the finite element method with the help of Gauss elimination technique.FindingsA comparison of obtained results is made with the previous work under the limiting cases. Behavior of flow and thermal fields against various governing parameters like mass transfer parameter, moving flat surface parameter, magnetic parameter, Prandtl number and Eckert number are analyzed and demonstrated graphically. Moreover, shear stress and heat flux at the moving surface for various values of the physical parameters are presented numerically in tabular form and discussed in detail.Originality/valueThe work is relatively original, as very little work has been reported on magnetohydrodynamic flow and heat transfer over a continuous moving flat surface. Viscous dissipation and Joule heating are neglected in most of the previous studies. The numerical method applied to solve governing equations is finite element method which is new and efficient.

scholarly journals Influence of Joule Heating and Non-Linear Radiation on MHD 3D Dissipating Flow of Casson Nanofluid past a Non-Linear Stretching Sheet

2019 ◽  
Vol 8 (1) ◽  
pp. 661-672
Author(s):  
Pandikunta Sreenivasulu ◽  
Tamalapakula Poornima ◽  
Nandanoor Bhaskar Reddy
Keyword(s):  
Differential Equations ◽  
Viscous Dissipation ◽  
Joule Heating ◽  
Stretching Sheet ◽  
Nonlinear Partial Differential Equations ◽  
Three Dimensional ◽  
Skin Friction Coefficient ◽  
Casson Nanofluid ◽  
Similarity Transformations ◽  
Non Linear

Abstract Present analysis is to study the combined effects of viscous dissipation and Joule heating on MHD three-dimensional laminar flow of a viscous incompressible non-linear radiating Casson nanofluid past a nonlinear stretching porous sheet. Present model describes that flow generated by bi-directional non-linear stretching sheet with thermophoresis and Brownian motion effects. The governing nonlinear partial differential equations are transformed into a system of nonlinear coupled ordinary differential equations by similarity transformations and then solved by employing shooting method. The effects of the flow parameters on the velocity, temperature and concentration as well as the skin friction coefficient, Nusselt number and Sherwood number near the wall are computed for various values of the fluid properties. This study reveals that the temperature of Casson nanofluid increases with combination of viscous dissipation and Joule heating. Increasing thermophoresis parameter increases the species concentration of the nanoflow. The comparison of present results have been made with the published work and the results are found to be very good agreement.

scholarly journals Physical Aspects of Homogeneous-Heterogeneous Reactions on MHD Williamson Fluid Flow across a Nonlinear Stretching Curved Surface Together with Convective Boundary Conditions

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Kamran Ahmed ◽  
Tanvir Akbar ◽  
Taseer Muhammad
Keyword(s):  
Differential Equations ◽  
Boundary Conditions ◽  
Heterogeneous Reaction ◽  
Nonlinear Partial Differential Equations ◽  
Heterogeneous Reactions ◽  
Curved Surface ◽  
Convective Boundary Conditions ◽  
Convective Boundary ◽  
Williamson Fluid ◽  
Nonlinear Stretching

This article is concerned with the fluid mechanics of MHD steady 2D flow of Williamson fluid over a nonlinear stretching curved surface in conjunction with homogeneous-heterogeneous reactions with convective boundary conditions. An effective similarity transformation is considered that switches the nonlinear partial differential equations riveted to ordinary differential equations. The governing nonlinear coupled differential equations are solved by using MATLAB bvp4c code. The physical features of nondimensional Williamson fluid parameter λ , power-law stretching index m , curvature parameter K , Schmidt number Sc , magnetic field parameter M , Prandtl number Pr , homogeneous reaction strength k 1 , heterogeneous reaction strength k 2 , and Biot number γ are presented through the graphs. The tabulated form of results is obtained for the skin friction coefficient. It is noted that both the homogeneous and heterogeneous reaction strengths reduced the concentration profile.

Bioconvection of a Radiating Hybrid Nanofluid Past a Thin Needle in the Presence of Heterogeneous-Homogeneous Chemical Reaction

2021 ◽  
Author(s):  
V Puneeth ◽  
S. Manjunatha ◽  
O.D Makinde ◽  
B.J Gireesha
Keyword(s):  
Differential Equations ◽  
Volume Fraction ◽  
Heterogeneous Reaction ◽  
Hybrid Nanofluid ◽  
Homogeneous Reaction ◽  
Reaction Parameter ◽  
Bulk Fluid ◽  
Electrically Conducting ◽  
Footwear Industry ◽  
Ultraviolet Illumination

Abstract : The photo catalytic nature of TiO_2 finds applications in medicinal field to kill cancer cells, bacteria and viruses under mild ultraviolet illumination and the antibacterial characteristic of Ag makes the composition Ag-TiO_2 applicable for various purposes. It can also be used in other engineering appliances and industries such as humidity sensor, coolants and in footwear industry. Hence, this study deals with the analysis of the effects of Magnetic field, thermal radiation and quartic autocatalysis of heterogeneous-homogeneous reaction in an electrically conducting Ag-TiO_2-H_2 O hybrid nanofluid. Furthermore, the gyrotactic microorganisms are used as active mixers to prevent agglomeration and sedimentation of TiO_2 that occurs due to its hydrophobic nature. The Mathematical model takes the form of partial differential equations with viscosity and thermal conductivity being the functions of volume fraction. These equations are converted to ordinary differential equations by using similarity transformation and are solved by RKF-45 method with the aid of shooting method. It is observed that the increase in the size of the needle enhances the overall performance of the hybrid nanofluid. Furthermore, the temperature of the hybrid nanofluid increases with the increase in volume fraction. It is observed that the friction produced by the Lorentz force increases the temperature of the nanofluid. It is further observed that the heterogeneous reaction parameter has more significant effect on the concentration of bulk fluid than the homogeneous reaction parameter.

scholarly journals Analysis of Heat Transfer in Berman Flow of Nanofluids with Navier Slip, Viscous Dissipation, and Convective Cooling

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
O. D. Makinde ◽  
S. Khamis ◽  
M. S. Tshehla ◽  
O. Franks
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Viscous Dissipation ◽  
Perturbation Methods ◽  
Regular Perturbation ◽  
Convective Cooling ◽  
Navier Slip ◽  
Nusselt Numbers ◽  
Similarity Transformations ◽  
Friction Pressure Drop

Heat transfer characteristics of a Berman flow of water based nanofluids containing copper (Cu) and alumina (Al2O3) as nanoparticles in a porous channel with Navier slip, viscous dissipation, and convective cooling are investigated. It is assumed that the exchange of heat with the ambient surrounding takes place at the channel walls following Newton’s law of cooling. The governing partial differential equations and boundary conditions are converted into a set of nonlinear ordinary differential equations using appropriate similarity transformations. These equations are solved analytically by regular perturbation methods with series improvement technique and numerically using an efficient Runge-Kutta Fehlberg integration technique coupled with shooting scheme. The effects of the governing parameters on the dimensionless velocity, temperature, skin friction, pressure drop, and Nusselt numbers are presented graphically and discussed quantitatively.

Heat transfer of three-dimensional micropolar fluid on a Riga plate

2020 ◽  
Vol 98 (1) ◽  
pp. 32-38 ◽  
Author(s):  
S. Nadeem ◽  
M.Y. Malik ◽  
Nadeem Abbas
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Differential Equations ◽  
Surface Temperature ◽  
Ordinary Differential Equations ◽  
Nonlinear Partial Differential Equations ◽  
Three Dimensional ◽  
Nonlinear Ordinary Differential Equations ◽  
Exponential Order ◽  
Riga Plate

In this article, we deal with prescribed exponential surface temperature and prescribed exponential heat flux due to micropolar fluids flow on a Riga plate. The flow is induced through an exponentially stretching surface within the time-dependent thermal conductivity. Analysis is performed inside the heat transfer. In our study, two cases are discussed here, namely prescribed exponential order surface temperature (PEST) and prescribed exponential order heat flux (PEHF). The governing systems of the nonlinear partial differential equations are converted into nonlinear ordinary differential equations using appropriate similarity transformations and boundary layer approach. The reduced systems of nonlinear ordinary differential equations are solved numerically with the help of bvp4c. The significant results are shown in tables and graphs. The variation due to modified Hartman number M is observed in θ (PEST) and [Formula: see text] (PEHF). θ and [Formula: see text] are also reduced for higher values of the radiation parameter Tr. Obtained results are compared with results from the literature.

scholarly journals MHD stagnation-point flow and heat transfer past a stretching/shrinking sheet in a hybrid nanofluid with induced magnetic field

2019 ◽  
Vol 30 (3) ◽  
pp. 1345-1364 ◽  
Author(s):  
Mohamad Mustaqim Junoh ◽  
Fadzilah Md Ali ◽  
Norihan Md Arifin ◽  
Norfifah Bachok ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Nonlinear Partial Differential Equations ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Induced Magnetic Field ◽  
Content Type

Purpose The purpose of this paper is to investigate the steady magnetohydrodynamics (MHD) boundary layer stagnation-point flow of an incompressible, viscous and electrically conducting fluid past a stretching/shrinking sheet with the effect of induced magnetic field. Design/methodology/approach The governing nonlinear partial differential equations are transformed into a system of nonlinear ordinary differential equations via the similarity transformations before they are solved numerically using the “bvp4c” function in MATLAB. Findings It is found that there exist non-unique solutions, namely, dual solutions for a certain range of the stretching/shrinking parameters. The results from the stability analysis showed that the first solution (upper branch) is stable and valid physically, while the second solution (lower branch) is unstable. Practical implications This problem is important in the heat transfer field such as electronic cooling, engine cooling, generator cooling, welding, nuclear system cooling, lubrication, thermal storage, solar heating, cooling and heating in buildings, biomedical, drug reduction, heat pipe, space aircrafts and ships with better efficiency than that of nanofluids applicability. The results obtained are very useful for researchers to determine which solution is physically stable, whereby, mathematically more than one solution exist. Originality/value The present results are new and original for the problem of MHD stagnation-point flow over a stretching/shrinking sheet in a hybrid nanofluid, with the effect of induced magnetic field.

Influence of nonlinear thermal radiation and viscous dissipation on three-dimensional flow of Jeffrey nano fluid over a stretching sheet in the presence of Joule heating

2017 ◽  
Vol 6 (3) ◽  
Author(s):  
K. Ganesh Kumar ◽  
N.G. Rudraswamy ◽  
B.J. Gireesha ◽  
M.R. Krishnamurthy
Keyword(s):  
Differential Equations ◽  
Thermal Radiation ◽  
Ordinary Differential Equations ◽  
Viscous Dissipation ◽  
Joule Heating ◽  
Stretching Sheet ◽  
Three Dimensional ◽  
Nonlinear Thermal Radiation ◽  
Nonlinear Ordinary Differential Equations ◽  
Three Dimensional Flow

AbstractPresent exploration discusses the combined effect of viscous dissipation and Joule heating on three dimensional flow and heat transfer of a Jeffrey nanofluid in the presence of nonlinear thermal radiation. Here the flow is generated over bidirectional stretching sheet in the presence of applied magnetic field by accounting thermophoresis and Brownian motion of nanoparticles. Suitable similarity transformations are employed to reduce the governing partial differential equations into coupled nonlinear ordinary differential equations. These nonlinear ordinary differential equations are solved numerically by using the Runge–Kutta–Fehlberg fourth–fifth order method with shooting technique. Graphically results are presented and discussed for various parameters. Validation of the current method is proved by comparing our results with the existing results under limiting situations. It can be concluded that combined effect of Joule and viscous heating increases the temperature profile and thermal boundary layer thickness.

Sign in / Sign up

Export Citation Format

Share Document