Phenotypic plasticity of pigmentation and morphometric traits inPnigalio soemius(Hymenoptera: Eulophidae)

2007 ◽  
Vol 97 (1) ◽  
pp. 101-109 ◽  
Author(s):  
U. Bernardo ◽  
P.A. Pedata ◽  
G. Viggiani
Keyword(s):  
Morphological Traits ◽  
Phenotypic Variability ◽  
Economic Importance ◽  
Effect Of Temperature ◽  
Morphometric Traits ◽  
Influence Of Temperature ◽  
Natural Hosts ◽  
Different Temperatures ◽  
Influence Of Temperature On ◽  
Range Of Variation

AbstractSpecies of the genusPnigalioSchrank are ectoparasitoids on several pest insects. Most species are polyphagous parasitoids of lepidopteran and dipteran leafminers. Despite their potential economic importance, information on intraspecific phenotypic variability is insufficient.Pnigalio soemius(Walker) was reared at five different temperatures (10, 15, 20, 25, 30°C) on mature larvae of one of its natural hosts,Cosmopterix pulchrimellaChambers (Lepidoptera: Cosmopterigidae), to investigate the influence of temperature on size, colour and other morphological traits, and to measure the range of variation of several characters. Thermal developmental reaction norms, which represent the effect of temperature during growth and development on the value of some adult traits, were produced. The results confirmed the influence of temperature on numerous characters and that these characters had a larger range of variation than realized previously in the construction of taxonomic keys to species. In particular, the number and position of the costulae on the propodeum and colour of the gaster were affected by rearing temperature.

The effect of temperature on high-resolution TEM image contrast

1995 ◽  
Vol 53 ◽  
pp. 640-641
Author(s):  
T. Geipel ◽  
W. Mader ◽  
P. Pirouz
Keyword(s):  
Form Factor ◽  
Inelastic Scattering ◽  
Accurate Method ◽  
Waller Factor ◽  
Effect Of Temperature ◽  
Specimen Thickness ◽  
Influence Of Temperature ◽  
Debye Waller Factor ◽  
Influence Of Temperature On ◽  
Atomic Form Factor

Temperature affects both elastic and inelastic scattering of electrons in a crystal. The Debye-Waller factor, B, describes the influence of temperature on the elastic scattering of electrons, whereas the imaginary part of the (complex) atomic form factor, fc = fr + ifi, describes the influence of temperature on the inelastic scattering of electrons (i.e. absorption). In HRTEM simulations, two possible ways to include absorption are: (i) an approximate method in which absorption is described by a phenomenological constant, μ, i.e. fi; - μfr, with the real part of the atomic form factor, fr, obtained from Hartree-Fock calculations, (ii) a more accurate method in which the absorptive components, fi of the atomic form factor are explicitly calculated. In this contribution, the inclusion of both the Debye-Waller factor and absorption on HRTEM images of a (Oll)-oriented GaAs crystal are presented (using the EMS software.Fig. 1 shows the the amplitudes and phases of the dominant 111 beams as a function of the specimen thickness, t, for the cases when μ = 0 (i.e. no absorption, solid line) and μ = 0.1 (with absorption, dashed line).

Research on dynamic characteristics of gear system considering the influence of temperature on material performance

2021 ◽  
pp. 107754632110026
Author(s):  
Zhou Sun ◽  
Siyu Chen ◽  
Xuan Tao ◽  
Zehua Hu
Keyword(s):  
Elastic Modulus ◽  
Dynamic Characteristics ◽  
Poisson’S Ratio ◽  
Gear System ◽  
Poisson's Ratio ◽  
Effect Of Temperature ◽  
Time Varying ◽  
Influence Of Temperature ◽  
Meshing Stiffness ◽  
Influence Of Temperature On

Under high-speed and heavy-load conditions, the influence of temperature on the gear system is extremely important. Basically, the current work on the effect of temperature mostly considers the flash temperature or the overall temperature field to cause expansion at the meshing point and then affects nonlinear factors such as time-varying meshing stiffness, which lead to the deterioration of the dynamic transmission. This work considers the effect of temperature on the material’s elastic modulus and Poisson’s ratio and relates the temperature to the time-varying meshing stiffness. The effects of temperature on the elastic modulus and Poisson’s ratio are expressed as functions and brought into the improved energy method stiffness calculation formula. Then, the dynamic characteristics of the gear system are analyzed. With the bifurcation diagram, phase, Poincaré, and fast Fourier transform plots of the gear system, the influence of temperature on the nonlinear dynamics of the gear system is discussed. The numerical analysis results show that as the temperature increases, the dynamic response of the system in the middle-speed region gradually changes from periodic motion to chaos.

Flow Behaviors of High Acyl Gellan Aqueous Solutions as Affected by Temperature, and Calcium and Gellan Concentrations

2008 ◽  
Vol 4 (5) ◽  
Author(s):  
Yiqun Huang ◽  
Pawan Singh Takhar ◽  
Juming Tang ◽  
Barry G Swanson
Keyword(s):  
Shear Rate ◽  
Aqueous Solutions ◽  
Apparent Viscosity ◽  
Flow Resistance ◽  
Effect Of Temperature ◽  
Temperature Changes ◽  
Influence Of Temperature ◽  
Rheological Behaviors ◽  
Low Concentrations ◽  
Influence Of Temperature On

Rheological behaviors of high acyl (HA) gellan are not well understood partially because of its relatively late commercialization compared to low acyl gellan. The objective of this study was to investigate the effect of temperature (5-30 °C), calcium (0, 1 and 10 mM) and gellan concentrations (0.0044-0.1000% w/v) on the flow behaviors of high acyl gellan aqueous solutions using rheological tests. Gellan solutions with 0 or 1 mM added Ca++ exhibited shear thinning behavior at gellan concentrations above 0.0125%. The influence of temperature on apparent viscosity (shear rate, 100 s-1) of gellan solutions can be described with an Arrhenius relationship. The apparent viscosity of gellan solution at low concentrations was more sensitive to temperature changes. The addition of Ca++ led to a decrease in flow resistance for a dilute gellan solution (<0.0125%), but an increased resistance for a relatively concentrated gellan solution (>0.0125%).

Thermal influence on the embryonic development and hatching rate of the flameback pygmy angelfish Centropyge aurantonotus eggs

Zygote ◽  
2019 ◽  
Vol 28 (1) ◽  
pp. 80-82
Author(s):  
Raoani Cruz Mendonça ◽  
Sarah Pittigliani Ikebata ◽  
Sérgio Leandro Araújo-Silva ◽  
João Vitor Azevedo Manhães ◽  
Mônica Yumi Tsuzuki
Keyword(s):  
Embryonic Development ◽  
Incubation Temperature ◽  
Abiotic Factors ◽  
Environmental Parameters ◽  
Hatching Rate ◽  
Influence Of Temperature ◽  
Different Temperatures ◽  
Influence Of Temperature On ◽  
Thermal Influence ◽  
Hatching Rates

SummaryThe flameback pygmy angelfish Centropyge aurantonotus, highly appreciated and valued by the aquarium market, is heavily harvested and traded. Temperature is one of the abiotic factors that has the most influence on fish development, especially in the early stages of life. For captive production, it is essential to know the appropriate environmental parameters for each species. In this sense, this study aimed to evaluate the influence of temperature on the embryonic development and hatching rates of C. aurantonotus incubated at six different temperatures (20, 22, 24, 26, 28, 30°C). Embryonic development events were very similar in terms of morphological and chronological characteristics compared with other species of the genus Centropyge. Incubation time was inversely proportional to temperature. The treatment at 22°C required twice the time of that required by 30°C treatment for hatching to occur. The best incubation temperature range was 24–28°C. Values below 22°C and at 30°C showed lower hatching rates compared with other treatments. Based on these results, the recommended temperature at which to incubate C. aurantonotus eggs is between 24–28°C.

Temperature induced phase transition in fluorescence active zein nanoparticles

2021 ◽  
Vol 99 (1) ◽  
pp. 18-23
Author(s):  
Charlie Joe Croxford ◽  
Rajpreet Kaur ◽  
Kultar Singh ◽  
Mandeep Singh Bakshi
Keyword(s):  
Phase Transition ◽  
Temperature Variation ◽  
Room Temperature ◽  
Colloidal Stability ◽  
Precipitation Method ◽  
Effect Of Temperature ◽  
Influence Of Temperature ◽  
Influence Of Temperature On ◽  
Potential Use ◽  
Controlled Precipitation

Stable colloidal zein nanoparticles (NPs) were synthesized by using controlled precipitation method. They were made fluorescence active by incorporating a small amount of fluorescence quinolinium surfactant. The incorporation of fluorescence surfactant provided both the colloidal stability and the fluorescence ability to determine the phase transition in zein NPs under the effect of temperature variation. Maintaining colloidal stability under the effect of temperature variation is an essential aspect of zein NPs applicability as a source of vegetarian protein supplement in different food suspensions. Different techniques such as fluorescence, DLS size, zeta potential, and FTIR measurements were applied to determine the influence of temperature on the colloidal stability of zein NPs. Zein NPs undergo phase transition well above room temperature while maintaining their size in nanometer range, and the phase transition temperature decreased with the amount of zein used in the synthesis of zein NPs. The results highlighted the potential use of zein NPs as a vegetarian supplement protein in different food products.

Influence of Temperature on Field-Induced Reorientation Strain in Magnetic Shape Memory Alloy

2008 ◽  
Vol 575-578 ◽  
pp. 848-853
Author(s):  
Yu Ping Zhu ◽  
Guan Suo Dui
Keyword(s):  
Shape Memory ◽  
Magnetic Shape Memory ◽  
Magnetic Shape Memory Alloys ◽  
Influence Of Temperature ◽  
Single Crystal Specimen ◽  
Magnetic Shape Memory Alloy ◽  
Different Temperatures ◽  
Influence Of Temperature On ◽  
Special Concern ◽  
Theoretical Results

A constitutive model for magnetic shape memory alloys is developed through a combined consideration of micromechanical and thermodynamic theories. Of special concern is the influence of different temperatures on field-induced reorientation strain for a NiMnGa single-crystal specimen. The theoretical results are found to be in general agreement with experimental data. It is shown that the method is accurate and simple.

Effect of Temperature on the Predator, (Reuter) (Hemiptera: Anthocordiae) Feeding on Cryptolestes pusillus (Schon.) (Coleoptera: Cucujidae)

1970 ◽  
Vol 15 ◽  
pp. 41-46 ◽  
Author(s):  
MM Rahman ◽  
W Islam ◽  
KN Ahmed
Keyword(s):  
Life History ◽  
Insect Pest ◽  
Developmental Time ◽  
Effect Of Temperature ◽  
Hatching Rate ◽  
Immature Stages ◽  
Egg Hatching ◽  
Influence Of Temperature ◽  
Influence Of Temperature On ◽  
Cryptolestes Pusillus

Xylocoris flavipes (Reuter) is one of the dominant predators of many stored product insect pest including Cryptolestes pusillus. The influence of temperature on predator development, survival and some selected life history parameters was determined. Eggs laid/female (27.27±2.52) and egg hatching rate (%) (88.25±2.19) were highest at 30°C and lowest at 20°C (5.43±1.19 and 30.79±4.63%) respectively but no eggs laid at 15°C. Mortality among immature stages (%) was highest (51.71±1.48) at 35°C and lowest (24.25c±1.14) at 25°C. Developmental times decreasing with the increasing of temperature. Maximum numbers of progeny/female/day (3.55±0.76) were produced at 25°C and minimum (0.83±0.04) were at 20°C.The sex ratios (% female) of X. flavipes were 47.04, 56.68, 51.66 and 50.07 for 20, 25, 30 and 35°C respectively. Survivorship of ovipositing females was highest at 25°C but lowest at 35°C respectively. Key words: Xylocoris flavipes, Cryptolestes pusillus, life history, temperature, developmental time   doi: 10.3329/jbs.v15i0.2201 J. bio-sci. 15: 41-46, 2007

scholarly journals XXXVI. On the influence of temperature on the refraction of light

1858 ◽  
Vol 148 ◽  
pp. 887-894 ◽  
Keyword(s):  
Field Of View ◽  
Refractive Indices ◽  
Narrow Slit ◽  
Joint Research ◽  
Influence Of Temperature ◽  
Fine Wire ◽  
Different Temperatures ◽  
Influence Of Temperature On ◽  
The Many ◽  
Cobalt Blue

Fraunhofer, in his original measurements of the fixed lines of the spectrum, noted the thermometer, and those who since his time have occupied themselves with the determi­nation of refractive indices, must have frequently noticed that changes of temperature affect the amount of refraction; yet of the many observations now on record, few have affixed to them the temperature at which they were made. Baden Powell has drawn out some refractive indices of the same substance taken at different temperatures, but remarks that the whole subject, both as to the facts of the case and as to their bear­ing on the theoretical formulæ, remains to be investigated. Among his beautiful researches on light, M. Jamin has recently published one or two experiments on refrac­tion, heat, and density; but, with this exception, he has left untouched the great question of the influence of temperature. Some years ago Baden Powell kindly lent his instrument to one of us for the pur­pose of investigating this question. It is described and figured in the Report of the British Association for 1839. It consists essentially of a small telescope moving on a circle graduated so finely, that by means of a vernier and magnifying glass it may be read to 10"; to ensure accuracy, there is a vernier at each end of the moveable arm: in front of the telescope are appliances for fixing any solid prism, or a hollow prism capable of containing liquids, in such a position that there may be seen through it a ray of light proceeding from a distant slit. The telescope may be moved till a fine wire fastened in the field of view is brought to coincide with any of Fraunhofer’s lines the prismatic spectrum thus obtained, and the angle indicated by the position of the telescope on the graduated circle may he read off. In our recent joint research, as we desired measure the positions of the extreme lines A and H, it was necessary to work with the full light of the sun; its mirrored image, therefore, was kept behind the narrow slit by a heliostat, and the eye was protected from the glare of the yellow ray by means of a cobalt-blue glass.

Effect of Temperature on Crater Formation and Ejecta Composition in Aluminum Alloy Targets

2012 ◽  
Vol 706-709 ◽  
pp. 768-773
Author(s):  
Masahiro Nishida ◽  
Koichi Hayashi ◽  
Junichi Nakagawa ◽  
Yoshitaka Ito
Keyword(s):  
Aluminum Alloy ◽  
High Temperature ◽  
Low Temperature ◽  
Room Temperature ◽  
Effect Of Temperature ◽  
Crater Formation ◽  
Influence Of Temperature ◽  
Gas Gun ◽  
Influence Of Temperature On ◽  
Increasing Temperature

The influence of temperature on crater formation and ejecta composition in thick aluminum alloy targets were investigated for impact velocities ranging from approximately 1.5 to 3.5 km/s using a two-stage light-gas gun. The diameter and depth of the crater increased with increasing temperature. The ejecta size at low temperature was slightly smaller than that at high temperature and room temperature. Temperature did not affect the size ratio of ejecta. The scatter diameter of the ejecta at high temperature was slightly smaller than those at low and room temperatures.

scholarly journals IV. On the influence of temperature on the heat of dissolution of salts in water

1885 ◽  
Vol 38 (235-238) ◽  
pp. 401-414
Keyword(s):  
Sodium Sulphate ◽  
Influence Of Temperature ◽  
Salt Melts ◽  
Different Temperatures ◽  
Anhydrous Compound ◽  
Influence Of Temperature On ◽  
Heat Of Dissolution ◽  
Vexed Question

The experiments described in this paper were undertaken in the hope of obtaining some light upon the vexed question of the condition in which a solid exists when dissolved in a liquid, and were directed more especially towards the investigation of the well-known remarkable phenomena exhibited by sodium sulphate. Crystallised sodium sulphate melts at about 34°, and at this temperature the salt begins to show signs of dissociation by depositing the anhydrous compound. According to Wiedemann, indeed, indications of change are observable at a few degrees lower. He finds by observation of the volume of the crystallised salt at different temperatures, that whereas slight expansion occurs from 17° to about 30°, contraction then sets in, at first slowly, then, at 33° to 34°, very rapidly, till the salt melts. The melted salt expands regularly in proportion as the temperature is raised to near 100°. Nicol has made experiments upon the expansion of solutions of the same salt, and with similar results.

Sign in / Sign up

Export Citation Format

Share Document