Response of Beans to Fertilizer and Seed Treatment in Central Province, Zambia

1990 ◽  
Vol 26 (4) ◽  
pp. 381-385
Author(s):  
M. Bezuneh ◽  
F. J. Olsen

SUMMARYOn-farm research was conducted in Zambia between 1984 and 1987 to examine the performance of an imported bean variety and identify management practices that could result in higher and more stable yields and to examine their economic feasibility for risk averse smallholder farmers. Results showed that the Brazilian bean variety Carioca was superior to the local variety tested in terms of yield, net economic returns and reliability of performance, especially when used in combination with fertilizer and insecticide.

1990 ◽  
Vol 26 (4) ◽  
pp. 381-385 ◽  
Author(s):  
M. Bezuneh ◽  
F. J. Olsen

SUMMARYOn-farm research was conducted in Zambia between 1984 and 1987 to examine the performance of an imported bean variety and identify management practices that could result in higher and more stable yields and to examine their economic feasibility for risk averse smallholder farmers. Results showed that the Brazilian bean variety Carioca was superior to the local variety tested in terms of yield, net economic returns and reliability of performance, especially when used in combination with fertilizer and insecticide.


2011 ◽  
Vol 39 (02) ◽  
pp. 95-100
Author(s):  
J. C. van Veersen ◽  
O. Sampimon ◽  
R. G. Olde Riekerink ◽  
T. J. G. Lam

SummaryIn this article an on-farm monitoring approach on udder health is presented. Monitoring of udder health consists of regular collection and analysis of data and of the regular evaluation of management practices. The ultimate goal is to manage critical control points in udder health management, such as hygiene, body condition, teat ends and treatments, in such a way that results (udder health parameters) are always optimal. Mastitis, however, is a multifactorial disease, and in real life it is not possible to fully prevent all mastitis problems. Therefore udder health data are also monitored with the goal to pick up deviations before they lead to (clinical) problems. By quantifying udder health data and management, a farm is approached as a business, with much attention for efficiency, thought over processes, clear agreements and goals, and including evaluation of processes and results. The whole approach starts with setting SMART (Specific, Measurable, Acceptable, Realistic, Time-bound) goals, followed by an action plan to realize these goals.


Author(s):  
Jim Fawcett ◽  
Zack Koopman ◽  
Lance Miller ◽  
Wayne Roush ◽  
Josh Sievers

2016 ◽  
Vol 3 (3) ◽  
Author(s):  
DHANANJAI SINGH ◽  
A.K. PATEL ◽  
S.K. SINGH ◽  
M.S. BAGHEL

Krishi Vigyan Kendra laid down Front Line Demonstration in the year 2010-11 and 2011-12 introducing new, high yielding and scented variety “Pusa Sugandha-3” and applying scientific practices in their cultivation. The FLDs were carried out in village “Dainiha” of Sidhi district in supervision of KVK scientist. The productivity and economic returns of paddy in improved technologies were calculated and compared with the corresponding farmer's practices (local check). Improved practices recorded higher yield as compared to farmer's practices. The improved technology recorded higher yield of 30.83 q/ha and 32.65 q/ha in the year 2010-11 and 2011-12, respectively than 22.13 and 24.21 q/ha. The average yield increase was observed 37.15 per cent. In spite of increase in yield of paddy, technology gap, extension gap and technology index existed. The improved technology gave higher gross return (37020 and 39180 Rs./ha), net return (16820 and 18920 Rs./ha) with higher benefit cost ratio (1.83 and 1.93) as compared to farmer's practices. The variation in per cent increase in the yield was found due to the poor management practices, lack of knowledge and poor socio economic condition. Under sustainable agricultural practices, with this study it is concluded that the FLDs programmes were effective in changing attitude, skill and knowledge of improved package and practices of HYV of paddy adoption.


2021 ◽  
Vol 13 (3) ◽  
pp. 1158
Author(s):  
Cecilia M. Onyango ◽  
Justine M. Nyaga ◽  
Johanna Wetterlind ◽  
Mats Söderström ◽  
Kristin Piikki

Opportunities exist for adoption of precision agriculture technologies in all parts of the world. The form of precision agriculture may vary from region to region depending on technologies available, knowledge levels and mindsets. The current review examined research articles in the English language on precision agriculture practices for increased productivity among smallholder farmers in Sub-Saharan Africa. A total of 7715 articles were retrieved and after screening 128 were reviewed. The results indicate that a number of precision agriculture technologies have been tested under SSA conditions and show promising results. The most promising precision agriculture technologies identified were the use of soil and plant sensors for nutrient and water management, as well as use of satellite imagery, GIS and crop-soil simulation models for site-specific management. These technologies have been shown to be crucial in attainment of appropriate management strategies in terms of efficiency and effectiveness of resource use in SSA. These technologies are important in supporting sustainable agricultural development. Most of these technologies are, however, at the experimental stage, with only South Africa having applied them mainly in large-scale commercial farms. It is concluded that increased precision in input and management practices among SSA smallholder farmers can significantly improve productivity even without extra use of inputs.


2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Wilton Mbinda ◽  
Agnes Kavoo ◽  
Fredah Maina ◽  
Margaret Odeph ◽  
Cecilia Mweu ◽  
...  

Abstract Background Finger millet blast disease, caused by Pyricularia oryzae, is a serious constrain of finger millet production which is threatening global food security especially to the resource poor smallholder farmers in arid and semi-arid regions. The disease adversely affects finger millet production and consumption due to its wide distribution and destruction in all finger millet growing areas of southern Asia and eastern Africa. Here, we present a study that investigated the occurrence, impact, risk factors and farmers’ knowledge and perceptions of finger millet blast in Kenya. Methods We surveyed blast disease occurrence and interviewed farmers in Bungoma and Kisii Counties of Kenya during March–April 2019. Data were analysed using SPSS statistical program. Descriptive analysis was done by calculating means, percentages, frequencies, and standard errors. Comparative statistics, chi-square and t-tests, were used to evaluate differences existing among the farm characteristics and socio-demographics and the knowledge and perceptions of blast disease and its management practices. Results Our results show that blast disease is prevalent in all surveyed areas and adversely affects the productivity of the crop leading to poor yields. The disease occurrence varied from 92 to 98%, and was significantly higher in the major finger millet growing areas compared to the minor ones. Blast occurrence was associated with rainfall, altitude, planting density, intercropping and other farming practices. In all the surveyed regions, farmers had little knowledge about blast disease identification, its detection and spread. Further, the farmers’ awareness of blast disease control was inconsistent with established practices. Conclusions Our results show mitigation of finger millet blast disease should aim at improving farmers’ adoption of best practices through development of acceptable blast-resistant finger millet varieties, use of sustainable disease management practices, fostering linkages and creating new partnerships in the production-supply chain and maintaining a functional seed system. Findings from this study provide essential insights for effective decision making and management of the disease. This is fundamental to sustainable and secure food and income for finger millet growing farmers in Kenya.


Author(s):  
Caroline Dubbert ◽  
Awudu Abdulai

Abstract Many studies show that participation in contract farming has positive impacts on farm productivity and incomes. Most of the literature, however, does not take into account that contracts vary in their specifications, making empirical evidence scarce on the diverse impacts of different types of contracts. In this study, we investigate the driving forces of participation in marketing and production contracts, relative to spot markets. We also study the extent to which different contract types add additional benefits to smallholder farmers, using recent survey data of 389 cashew farmers in Ghana. To account for selection bias arising from observed and unobserved factors, we apply a multinomial endogenous switching regression method and implement a counterfactual analysis. The empirical results demonstrate that farmers who participate in production contracts obtain significantly higher cashew yields, cashew net revenues, and are more food secure compared to spot market farmers. We also find substantial heterogeneity in the impact of marketing and production contracts across scale of operation. Small sized farms that participate in production contracts tend to benefit the most. Marketing contracts, however, do not appear to benefit cashew farmers.


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Ramhari Poudyal ◽  
Pavel Loskot ◽  
Ranjan Parajuli

AbstractThis study investigates the techno-economic feasibility of installing a 3-kilowatt-peak (kWp) photovoltaic (PV) system in Kathmandu, Nepal. The study also analyses the importance of scaling up the share of solar energy to contribute to the country's overall energy generation mix. The technical viability of the designed PV system is assessed using PVsyst and Meteonorm simulation software. The performance indicators adopted in our study are the electric energy output, performance ratio, and the economic returns including the levelised cost and the net present value of energy production. The key parameters used in simulations are site-specific meteorological data, solar irradiance, PV capacity factor, and the price of electricity. The achieved PV system efficiency and the performance ratio are 17% and 84%, respectively. The demand–supply gap has been estimated assuming the load profile of a typical household in Kathmandu under the enhanced use of electric appliances. Our results show that the 3-kWp PV system can generate 100% of electricity consumed by a typical residential household in Kathmandu. The calculated levelised cost of energy for the PV system considered is 0.06 $/kWh, and the corresponding rate of investment is 87%. The payback period is estimated to be 8.6 years. The installation of the designed solar PV system could save 10.33 tons of CO2 emission over its lifetime. Overall, the PV systems with 3 kWp capacity appear to be a viable solution to secure a sufficient amount of electricity for most households in Kathmandu city.


Agriculture ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 298
Author(s):  
Fekremariam Asargew Mihretie ◽  
Atsushi Tsunekawa ◽  
Nigussie Haregeweyn ◽  
Enyew Adgo ◽  
Mitsuru Tsubo ◽  
...  

Teff is an important crop for smallholder farmers in Ethiopia. Improved crop management practices are needed to increase teff productivity and decrease production costs. Here, we used a split–split plot design to evaluate the impacts of different tillage, sowing, and soil compaction practices, and their combinations, on agronomic performance, weed population, lodging, and cost in teff production at the Aba Gerima watershed in northwestern Ethiopia in 2018–2020. Reduced tillage (RT) improved soil moisture, resulting in increased agronomic performance and decreased production costs compared with conventional tillage (CT); however, the weed population was substantially larger with RT than with CT. Row planting (RP) reduced seed cost and lodging but increased sowing and weeding costs compared with broadcast planting (BP). Plant population and leaf area index were substantially greater with BP than with RP during early-stage growth, but this reversed during late-stage growth. Despite labor costs being significantly greater with (WC) compaction than without (NC), little to no differences were observed in the weed population or in agronomic performance. Partial cost–benefit analysis revealed that RT–RP–WC followed by RT–RP–NC was the most economical treatment combination, suggesting that RT–RP–NC could be a labor-effective means of increasing teff production by smallholder farms in Ethiopia.


Sign in / Sign up

Export Citation Format

Share Document