Structural evolution and significance of a mélange in a collision belt: the Lichi Mélange and the Taiwan arc–continent collision

2001 ◽  
Vol 138 (6) ◽  
pp. 633-651 ◽  
Author(s):  
C. P. CHANG ◽  
J. ANGELIER ◽  
C. Y. HUANG ◽  
C. S. LIU
Keyword(s):  
Plate Boundary ◽  
Structural Evolution ◽  
Philippine Sea Plate ◽  
Eurasian Plate ◽  
Seismic Profiles ◽  
Forearc Basin ◽  
Weak Zone ◽  
Manila Trench ◽  
Mountain Belts ◽  
Coastal Range

The analysis of ‘mélanges’ of various types (sedimentary, diapiric, tectonic and polygenetic) is generally difficult and depends on a variety of criteria. However, understanding the nature and origin of mélanges is crucial to deciphering the evolution of some mountain belts. The Lichi Mélange of the Taiwan Coastal Range is juxtaposed against remnant forearc basin sequences by thrust faults and is composed of exotic ophiolite and sedimentary blocks, with sizes ranging from metres to kilometres, and coherent turbidite beds, all embedded in a sheared scaly argillaceous matrix. The Lichi Mélange has been interpreted either as a subduction complex, or as an olistostrome. By separating four main deformation levels based on the degree of disruption within the Lichi Mélange and adjacent sedimentary rocks, we have made new detailed geological maps and structural profiles in two key areas of the Lichi Mélange. We paid particular attention to the original stratigraphic relationships between the mélange and the adjacent flysch formation. Our field results compared with submarine seismic profiles suggest that the present-day structure of the Lichi Mélange results mainly from the shearing of lower forearc basin sequences, rather than from a subduction complex or a mere olistostrome. In Late Miocene time, because lithospheric subduction turned into arc–continent collision in the southern Taiwan area, the site of the proto-Manila trench changed from an active plate boundary into a deformation zone with several thrusts. A new plate suture zone between the Eurasian plate (eastern Central Range) and the Philippine Sea plate (Coastal Range) was therefore formed along the Longitudinal Valley. The Longitudinal Valley originated as a submarine arc–prism boundary, an innate weak zone within the overriding plate, and has become a prominent tectonic feature of the arc–continent collision. This inference is supported by observations on the Lichi Mélange in the Coastal Range and the Huatung Ridge off southeastern Taiwan.

The significance and tectonic evolution of Huatung basin

2020 ◽  
Author(s):  
Minghui Zhao ◽  
Jean-Claude Sibuet ◽  
Jonny Wu ◽  
Longtao Sun ◽  
Jiazheng Zhang
Keyword(s):  
Seismic Refraction ◽  
Plate Boundary ◽  
Philippine Sea Plate ◽  
Plate Boundaries ◽  
Manila Trench ◽  
Shear Plate ◽  
Second Fracture ◽  
Tectonically Active ◽  
Seismic Refraction Survey ◽  
Early Cenozoic

<p>The Huatung basin (HB), located between the Philippine Sea plate (PSP) and the South China Sea (SCS), has likely existed near tectonically-active plate boundaries since the early Cenozoic. It may record SCS evolution from the SCS rifting phase to today, and is a key region to understand the broad geodynamic interactions between the SCS and PSP. A left-lateral shear plate boundary between the SCS and PSP followed the Gagua ridge and was active before 56 Ma. A slight compressive component along the Gagua ridge might have occurred from 40 to 30 Ma, giving rise to the topographic uplift of Gagua ridge and adjacent ridges with possibly some underthrusting of the PSP below the HB. A significant compressive episode also occurred along a second fracture zone around 23 Ma ago. The Manila trench inception occurred along the PSP-SCS plate boundary before the end of SCS spreading, involving the subduction of the younger SCS beneath the older HB. Later the intra-oceanic Luzon arc formed and collided in a sub-parallel fashion with the Eurasian continent around 5-6 Ma ago to form Taiwan. The PSP/EU motion was oblique with respect to this plate boundary during SCS opening. However, we have no direct evidence of the HB age (early Cenozoic or early Cretaceous) and if the PSP underthrusted below the HB. We propose to carry a deep seismic refraction survey and dredge sampling of basement units to clarify this problem. This work is supported by the Chinese National Natural Science Foundation (contracts 91958212, 41730532, 41576070 and 41676043).</p>

scholarly journals Large-scale slope failure and active erosion occurring in the southwest Ryukyu fore-arc area

2001 ◽  
Vol 1 (4) ◽  
pp. 203-211 ◽  
Author(s):  
T. Matsumoto ◽  
M. Kimura ◽  
M. Nakamura ◽  
T. Ono
Keyword(s):  
Large Scale ◽  
Slope Failure ◽  
Gravitational Instability ◽  
Plate Boundary ◽  
Philippine Sea Plate ◽  
Eurasian Plate ◽  
Philippine Sea ◽  
Topographic Features ◽  
Ishigaki Island ◽  
Tensional Stress

Abstract. The southwestern Ryukyu area east of Taiwan Island is an arcuate boundary between Philippine Sea Plate and Eurasian Plate. The topographic features in the area are characterised by (1) a large-scale amphitheatre off Ishigaki Island, just on the estimated epicentre of the tsunamigenic earthquake in 1771, (2) lots of deep sea canyons located north of the amphitheatre, (3) 15–20 km wide fore-arc basin, (4) 15–20 km wide flat plane in the axial area of the trench, (5) E-W trending half grabens located on the fore-arc area, etc., which were revealed by several recent topographic survey expeditions. The diving survey by SHINKAI6500 in the fore-arc area on a spur located 120 km south of Ishigaki Island was carried out in 1992. The site is characterised dominantly by rough topography consisting of a series of steep slopes and escarpments. A part of the surface is eroded due to the weight of the sediment itself and consequently the basement layer is exposed. The site was covered with suspended particles during the diving, due to the present surface sliding and erosion. The same site was resurveyed in 1997 by ROV KAIKO, which confirmed the continuous slope failure taking place in the site. Another example that was observed by KAIKO expedition in 1997 is a largescale mud block on the southward dipping slope 80 km south of Ishigaki Island. This is apparently derived from the shallower part of the steep slope on the southern edge of the fan deposit south of Ishigaki Island. The topographic features suggest N-S or NE-SW tensional stress over the whole study area. In this sense, the relative motion between the two plates in this area is oblique to the plate boundary. So, the seaward migration of the plate boundary may occur due to the gravitational instability at the boundary of the two different lithospheric structures. This is evidenced by a lack of accretionary sediment on the fore-arc and the mechanism of a recent earthquake which occurred on 3 May 1998 in the Philippine Sea Plate 250 km SSE of Ishigaki Island.

scholarly journals Gamma Ray and Radon Anomalies in Northern Taiwan as a Possible Preearthquake Indicator around the Plate Boundary

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Ching-Chou Fu ◽  
Lou-Chuang Lee ◽  
Tsanyao Frank Yang ◽  
Cheng-Horng Lin ◽  
Cheng-Hong Chen ◽  
...  
Keyword(s):  
Gamma Rays ◽  
Gamma Ray ◽  
Plate Boundary ◽  
Philippine Sea Plate ◽  
Volcanic Area ◽  
Eurasian Plate ◽  
Oblique Collision ◽  
Soil Radon ◽  
Northern Taiwan ◽  
Radon Concentrations

Taiwan is tectonically situated in an oblique collision zone between the Philippine Sea Plate (PSP) and the Eurasian Plate (EP). Continuous observations of gamma rays at the Yangmingshan (YMSG) station and soil radon at the Tapingti (TPT) station were recorded in the volcanic area and around a major fault zone, respectively, in Taiwan for seismic studies. A number of anomalous high gamma ray counts and radon concentrations at certain times were found. It is noted that significant increases of soil radon concentrations were observed and followed by the increase in gamma rays a few days to a few weeks before earthquakes that occurred in northeastern Taiwan. Earthquakes such as these are usually related to the subduction of the PSP beneath the EP to the north along the subduction zone in northern Taiwan (e.g., ML=6.4, April 20, 2015). It is suggested that the preseismic activity may be associated with slow geodynamic processes at the subduction interface, leading to the PSP movement triggering radon enhancements at the TPT station. Furthermore, the further movement of the PSP might be blocked by the EP, with the accumulated elastic stress resulting in the increase of gamma rays due to the increase in porosity and fractures below the YMSG station. The continuous monitoring of the multiple parameters can improve the understanding of the relationship between the observed radon and gamma ray variations and the regional crustal stress/strain in north and northeastern Taiwan.

Frequency-dependent attenuation of shear waves in the crust of the southern Kanto area, Japan

1994 ◽  
Vol 84 (5) ◽  
pp. 1387-1396
Author(s):  
Shigeo Kinoshita
Keyword(s):  
Shear Waves ◽  
Strong Motion ◽  
Body Waves ◽  
Philippine Sea Plate ◽  
Eurasian Plate ◽  
Philippine Sea ◽  
Motion Data ◽  
Basement Rocks ◽  
Acceleration Data ◽  
Attenuation Characteristics

Abstract The attenuation characteristics of shear waves in the crust of the southern Kanto area, central Japan, were estimated using strong-motion data, including acceleration data recorded in the pre-Tertiary basement rocks by means of downhole observation. The quality factor Qs(f) was determined for a range of discrete frequencies from 0.5 to 16 Hz from the analysis of data from 13 local earthquakes with focal depths of less than about 50 km that occurred in the Philippine Sea plate and in the boundary zone between the lower part of the Eurasian plate and the upper part of the Philippine Sea plate. The estimated 1/Qs(f) shows a peaked structure in this frequency range on the assumption that the geometrical spreading exponent is -1 (body waves). The estimated peak 1/Qs(f) is of the order of 10-2 at 0.8 Hz.

Recent and active deformation in the North Evia domain, a diffuse plate boundary between Eurasia and Aegean plates in the Western termination of the North Anatolian Fault. 

2021 ◽  
Author(s):  
Fabien Caroir ◽  
Frank Chanier ◽  
Virginie Gaullier ◽  
Julien Bailleul ◽  
Agnès Maillard-Lenoir ◽  
...  
Keyword(s):  
Fault Zone ◽  
Plate Boundary ◽  
Fault Zones ◽  
North Anatolian Fault ◽  
Fault System ◽  
Eurasian Plate ◽  
Slip Rates ◽  
The North ◽  
South West ◽  
North Aegean

<p>The Anatolia-Aegean microplate is currently extruding toward the South and the South-West. This extrusion is classically attributed to the southward retreat of the Aegean subduction zone together with the northward displacement of the Arabian plate. The displacement of Aegean-Anatolian block relative to Eurasia is accommodated by dextral motion along the North Anatolian Fault (NAF), with current slip rates of about 20 mm/yr. The NAF is propagating westward within the North Aegean domain where it gets separated into two main branches, one of them bordering the North Aegean Trough (NAT). This particular context is responsible for dextral and normal stress regimes between the Aegean plate and the Eurasian plate. South-West of the NAT, there is no identified major faults in the continuity of the NAF major branch and the plate boundary deformation is apparently distributed within a wide domain. This area is characterised by slip rates of 20 to 25 mm/yr relative to Eurasian plate but also by clockwise rotation of about 10° since ca 4 Myr. It constitutes a major extensional area involving three large rift basins: the Corinth Gulf, the Almiros Basin and the Sperchios-North Evia Gulf. The latter develops in the axis of the western termination of the NAT, and is therefore a key area to understand the present-day dynamics and the evolution of deformation within this diffuse plate boundary area.</p><p>Our study is mainly based on new structural data from field analysis and from very high resolution seismic reflexion profiles (Sparker 50-300 Joules) acquired during the WATER survey in July-August 2017 onboard the R/V “Téthys II”, but also on existing data on recent to active tectonics (i.e. earthquakes distribution, focal mechanisms, GPS data, etc.). The results from our new marine data emphasize the structural organisation and the evolution of the deformation within the North Evia region, SW of the NAT.</p><p>The combination of our structural analysis (offshore and onshore data) with available data on active/recent deformation led us to define several structural domains within the North Evia region, at the western termination of the North Anatolian Fault. The North Evia Gulf shows four main fault zones, among them the Central Basin Fault Zone (CBFZ) which is obliquely cross-cutting the rift basin and represents the continuity of the onshore Kamena Vourla - Arkitsa Fault System (KVAFS). Other major fault zones, such as the Aedipsos Politika Fault System (APFS) and the Melouna Fault Zone (MFZ) played an important role in the rift initiation but evolved recently with a left-lateral strike-slip motion. Moreover, our seismic dataset allowed to identify several faults in the Skopelos Basin including a large NW-dipping fault which affects the bathymetry and shows an important total vertical offset (>300m). Finally, we propose an update of the deformation pattern in the North Evia region including two lineaments with dextral motion that extend southwestward the North Anatolian Fault system into the Oreoi Channel and the Skopelos Basin. Moreover, the North Evia Gulf domain is dominated by active N-S extension and sinistral reactivation of former large normal faults.</p>

Structural evolution of Kharan Forearc Basin, Balochistan, Pakistan

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Abid Hussain ◽  
Naveed Ahsan ◽  
Saif ur Rehman
Keyword(s):  
Structural Evolution ◽  
Forearc Basin

Evolution of migrating transform faults in anisotropic oceanic crust: examples from Iceland

2019 ◽  
Vol 56 (12) ◽  
pp. 1297-1308 ◽  
Author(s):  
Jeffrey A. Karson ◽  
Bryndís Brandsdóttir ◽  
Páll Einarsson ◽  
Kristján Sæmundsson ◽  
James A. Farrell ◽  
...  
Keyword(s):  
Plate Boundary ◽  
Fault Zones ◽  
Plate Boundaries ◽  
Transform Fault ◽  
Eurasian Plate ◽  
Transform Faults ◽  
The North ◽  
Rift Propagation ◽  
Oriented Parallel ◽  
Ocean Ridge

Major transform fault zones link extensional segments of the North American – Eurasian plate boundary as it transects the Iceland Hotspot. Changes in plate boundary geometry, involving ridge jumps, rift propagation, and related transform fault zone migration, have occurred as the boundary has moved relative to the hotspot. Reconfiguration of transform fault zones occurred at about 6 Ma in northern Iceland and began about 3 Ma in southern Iceland. These systems show a range of different types of transform fault zones, ranging from diffuse, oblique rift zones to narrower, well-defined, transform faults oriented parallel to current plate motions. Crustal deformation structures correlate with the inferred duration and magnitude of strike-slip displacements. Collectively, the different expressions of transform zones may represent different stages of development in an evolutionary sequence that may be relevant for understanding the tectonic history of plate boundaries in Iceland as well as the structure of transform fault zones on more typical parts of the mid-ocean ridge system.

Subduction processes on the Mariana trench and northern Manila trench: implications for the intra-oceanic and ocean-continent convergent margins

2020 ◽  
Author(s):  
Yang Liu ◽  
Ziyin Wu ◽  
Jihong Shang ◽  
Dineng Zhao ◽  
Jieqiong Zhou
Keyword(s):  
Subduction Zone ◽  
Comparative Investigation ◽  
Accretionary Wedge ◽  
Convergent Margins ◽  
Seismic Profiles ◽  
Seafloor Morphology ◽  
Bathymetric Data ◽  
Manila Trench ◽  
Subduction Erosion ◽  
Material Transportation

<p>Different tectonic backgrounds often produce different subduction mechanisms. The Mariana subduction zone is a typical erosive margin, and the mode of material transportation is mainly controlled by subduction erosion, while the subduction process in the northern Manila subduction zone is dominated by subduction accretion. However, there are little comparative investigation about the subduction mechanisms between the Mariana subduction zone and northern Manila subduction zone. In this study, the high-resolution bathymetric data obtained by using the multi-source data fusion method and collected multichannel seismic profiles are used to research the subduction mechanisms and to develop the subduction modes for the Mariana subduction zone and northern Manila subduction zone. We propose that the Mariana subduction zone formed at the intra-oceanic convergent margins with rare continental sediments tends to occur subduction erosion. A rough seafloor morphology (e.g. seamounts, horst and graben topography) of the subducting Pacific Plate, with a convergence rate of 8.4 cm/yr, and the steep slope of the inner trench, promote subduction erosion at the Mariana margin. The northern Manila subduction zone is the result of the convergence of ocean-continent plates. The continental sediments of the overlying plate usually undergo subduction accretion during the subducting process, forming an accretionary wedge along the northern Manila margin. With the continuously subducting of the continental crust, a series of folds and thrust faults are formed inside the accretionary wedge. Both the Mariana subduction zone and northern Manila subduction zone are distinctive types of the convergent margins in the world. The comparison of subduction mechanisms has important reference significance for the study of the subduction process, evolution and inter-plate interaction of global intra-oceanic and ocean-continent convergent margins.</p><p></p>

Sign in / Sign up

Export Citation Format

Share Document