Jaws and radula of the Carboniferous ammonoid Cravenoceras

A well-preserved mouth apparatus consisting of jaws and a radula was found in situ within the body chamber of the goniatite Cravenoceras fayettevillae Gordon, 1965 (Neoglyphiocerataceae: Cravenoceratidae), from the middle Chesterian (Upper Mississippian) of Arkansas. Both upper and lower jaws consist of a black material. The lower jaw is characterized by a widely opened larger outer lamella and a shorter inner lamella. The upper jaw is fragmental. The radula is preserved in the anterior portion of the buccal space and comprises a series of tooth elements. Each transverse tooth row consists of seven teeth (a rhachidian and pairs of two lateral and one marginal teeth), with a pair of marginal plates. This arrangement is typical of radulae of other ammonoids of Carboniferous to Cretaceous age, coleoids, and the orthoconic “nautiloid” Michelinoceras (Silurian, Michelinocerida), suggesting a phylogenetic affinity among them.

Download Full-text

An Anglo-Saxon Disc Brooch from Northamptonshire

The Antiquaries Journal ◽

10.1017/s0003581500023982 ◽

1962 ◽

Vol 42 (1) ◽

pp. 53-56

Author(s):

Vera I. Evison

Keyword(s):

The Body ◽

The Other ◽

Anglo Saxon ◽

Disc Diameter ◽

Thin Disc ◽

Lower Jaw ◽

Upper Jaw

A small gilt-bronze disc brooch was found at Little Houghton, Northants., in 1957, a surface find on a Roman site, and was acquired by Northampton Museum (pl. xv b, fig. 1). It is a thin disc, diameter 2·5 cm., tapering at the border, with remains of pin holder and catch at the back and shallow pattern in relief on the front. The gilding has rubbed off the higher parts of the pattern, and has disappeared entirely in places where the brooch has been damaged and bent, possibly by fire. The ornament consists of two Style II animals, identical except for the shape of the jaw. They are S-shaped, turning round to bite their own backs; the body continues directly into the angle of a back leg which crosses the body and ends at the border in the rudiments of a foot; a front limb shoots forward to interlock with the hind curve of the other animal; the head is an eye framed by a right-angle; in one case the upper jaw passes below the body and the lower jaw is short and curves only slightly outwards; in the other the upper jaw again runs below the body, and the lower jaw swings round and seems to meet the upper jaw behind in a complete loop. There is damage at this point, however, and on analogous evidence it is quite likely that the lower jaw did not join the upper, but swept on independently.

Download Full-text

Constitutional Features of the Maxillofacial Area of Omsk Young Men

Journal of Anatomy and Histopathology ◽

10.18499/2225-7357-2021-10-3-75-82 ◽

2021 ◽

Vol 10 (3) ◽

pp. 75-82

Author(s):

I. N. Putalova ◽

D. A. Devyatirikov ◽

A. P. Suslo ◽

A. A. Slavnov ◽

A. E. Korepova

Keyword(s):

Inclination Angle ◽

Young Men ◽

The Body ◽

Lower Incisor ◽

Lateral Projection ◽

Lower Jaw ◽

The Face ◽

Upper Jaw ◽

Base Of The Skull ◽

Frankfurt Horizontal

The aim was to determine the morphometric parameters of the maxillofacial area of Omsk young men of 18-20 years of age according to the teleroentgenography of the head (in a lateral projection), taking into account the indicators of cephalometry and anthropometry, to identify regional constitutional features of quantitative values.Material and methods. A cephalometric and somatometric examination of 26 Omsk Slavic young men of 18-20 years of age without concomitant pathology was performed, supplemented by an X-ray examination of the head (to obtain teleroentgenograms in a lateral projection). The analysis of teleroentgenograms was carried out in the online service Mave Cloud.Results. According to the results of anthropometry, the longitudinal and transverse dimensions of the young men's heads, the zygomatic diameter and the full height of the face were assessed; the indicators of body growth, body weight, chest circumference and transverse chest diameter were determined. These indicators were used to calculate the indices. The value of the facial index was 81.86 (79.31; 88.88), the value of the head index was 76.65 (74.27; 79.47), the Rees-Eisenck index corresponded to 97.58 (94.62; 107.48), the Rohrer index was 13.34 (12.07; 15.48), the Pinier index was 11.1 (-10; 22), the Quetelet II index was 23.33 (22.03; 27.71). When analyzing teleroentgenograms, it was revealed that the values of some parameters in Omsk young men of 18-20 years of age differ from the values of the «norm». Thus, the indicators of the lower jaw length (Go-Gn), the ratio of the body of the lower jaw length to the length of the anterior base of the skull (Go-Me/S-N), the length of the posterior base of the skull (S-Ar), the height of the branch of the lower jaw (Ar-Go), the ratio of the heights of the face (S-Go/N-Me), the angle between the axis of the lower incisor and the plane of the lower jaw (IM IMPA) have greater values than the «norm»; and the figures of the angles sum according to Bjork (∠SUM Bjork), mandibular angle (∠Ar-Go-Me), maxillary angle (∠N-Go-Ar), upper jaw inclination angle (∠NSL-NL), lower jaw inclination angle (∠NSL-ML), intermaxillary angle (∠NL-ML), the angle between the lower jaw plane and the Frankfurt horizontal (∠FMA), have values less than the «norm». The values of the saddle angle (∠N-S-Ar) differed in young men with euryprosopic and leptoprosopic facial forms. The quantitative values of the lower jaw angle (ArGo-Me) and the upper jaw angle (N-Go-Ar) differed only in the representatives of the dolichocephalic and mesocephalic forms of the head.Conclusion. Quantitative values of cephalometric and somatometric parameters in Omsk young men of 18-20 years of age have distinctive features. Individual parameters of the maxillofacial area (according to teleroentgenograms) differ in persons with dolichocephalic and mesocephalic forms of the head and in the representatives of euryprosopic and leptoprosopic forms of the face.

Download Full-text

Cranial morphology and osteology of the sexually dimorphic electric fish, Compsaraia samueli Albert & Crampton (Apteronotidae, Gymnotiformes), with comparisons to C. compsa (Mago-Leccia)

Zootaxa ◽

10.11646/zootaxa.4555.1.8 ◽

2019 ◽

Vol 4555 (1) ◽

pp. 101 ◽

Cited By ~ 2

Author(s):

RACHEL KEEFFE ◽

ERIC J. HILTON ◽

MÁRIO J. F. THOMÉ DE SOUZA ◽

CRISTINA COX FERNANDES

Keyword(s):

Sexual Dimorphism ◽

The Body ◽

Cranial Morphology ◽

Sexually Dimorphic ◽

Anterior Portion ◽

Lower Jaw ◽

Wide Range ◽

The Family ◽

Body Sizes ◽

Cranial Osteology

Sexual dimorphism of the snout has evolved independently in at least four separate clades of the gymnotiform family Apteronotidae. This phenomenon may help identify sex, except in the absence of mature individuals, and has led to confused taxonomy for several species. We examined a large collection of Compsaraia samueli collected during the breeding season from a remote stream in the Rio Negro drainage. This collection contains a wide range of sizes of both sexes, but most individuals were easily identified as mature. To quantify the sexual dimorphism of these specimens, 15 measurements were taken from the head and the body. In addition, some specimens were cleared-and-stained to study cranial osteology. We found that long-snouted males of C. samueli span a wide range of body sizes. As the snout length increases the distance between the eye and the occiput does not increase at the same rate, suggesting that it is only the anterior portion of the head that has an increased allometry. Skeletal anatomy differs between the sexes in that the lower jaw is more triangular in females and more linear in males. The coronomeckelian is small and round in females in contrast to being longer and pointed in males. There is strong interlacing of the dentary and anguloarticular bones in males, whereas this contact is not as extensive in females. We also discuss the implications of sexual dimorphism for identification of this species relative to its congener (C. compsa), and for the evolution of sexual dimorphism in the family.

Download Full-text

Size of lower jaw as an early indicator of skeletal class III development

Vojnosanitetski pregled ◽

10.2298/vsp0808589s ◽

2008 ◽

Vol 65 (8) ◽

pp. 589-595

Author(s):

Zdenka Stojanovic ◽

Angelina Nikodijevic ◽

Bozidar Udovicic ◽

Jasmina Milic ◽

Predrag Nikolic

Keyword(s):

Cranial Base ◽

The Body ◽

Mixed Dentition ◽

Class Iii ◽

Skeletal Class ◽

Total Length ◽

Lower Jaw ◽

Proportional Relation ◽

Significant Difference ◽

Upper Jaw

Background/Aim. Malocclusion of skeletal class III is a complex abnormality, with a characteristic sagital position of the lower jaw in front of the upper one. A higher level of prognatism of the lower jaw in relation to the upper one can be the consequence of its excessive length. The aim of this study was to find the differences in the length of the lower jaw in the children with skeletal class III and the children with normal sagital interjaw relation (skeletal class I) in the period of mixed dentition. Methods. After clinical and x-ray diagnostics, profile tele-x-rays of the head were analyzed in 60 examinees with mixed dentition, aged from 6 to 12 years. The examinees were divided into two groups: group 1 - the children with skeletal class III and group 2 - the children with skeletal class I. The length of the lower jaw, upper jaw and cranial base were measured. The proportional relations between the lengths measured within each group were established and the level of difference in the lengths measured and their proportions between the groups were estimated. Results. No significant difference between the groups was found in the body length, ramus and the total length of the lower jaw. Proportional relation between the body length and the length of the lower jaw ramus and proportional relation between the forward cranial base and the lower jaw body were not significantly different. A significant difference was found in proportional relations of the total length of the lower jaw with the total lengths of cranial base and the upper jaw and proportional relation of the length of the lower and upper jaw body. Conclusion. Of all the analyzed parameters, the following were selected as the early indicators of the development of skeletal class III on the lower jaw: greater total length of the lower jaw, proportional to the total lengths of cranial base and the upper jaw, as well as greater length of the lower jaw body, proportional to the length of the upper jaw body. .

Download Full-text

Classification of dental x-ray images

10.33915/etd.4258 ◽

2006 ◽

Author(s):

◽

Usman Qureshi ◽

Keyword(s):

Soft Tissues ◽

Detection Algorithm ◽

The Body ◽

Forensic Identification ◽

Efficient Manner ◽

Lower Jaw ◽

Curve Detection ◽

Upper Jaw ◽

Mass Disasters

Forensic dentistry is concerned with identifying people based on their dental records. Forensic specialists have a large number of cases to investigate and hence, it has become important to automate forensic identification systems. The radiographs acquired after a person is deceased are called the Post-mortem (PM) radiographs, and the radiographs acquired while the person is alive are called the Ante-mortem (AM) radiographs. Dental biometrics automatically analyzes dental radiographs to identify the deceased individuals. While, ante mortem (AM) identification is usually possible through comparison of many biometric identifiers, postmortem (PM) identification is impossible using behavioral biometrics (e.g. speech, gait). Moreover, under severe circumstances, such as those encountered in mass disasters (e.g. airplane crashes and natural disasters such as Tsunami) most physiological biometrics may not be employed for identification, because of the decay of soft tissues of the body to unidentifiable states. Under such circumstances, the best candidates for postmortem biometric identification are the dental features because of their survivability and diversity.;In my work, I present two different techniques to classify periapical images as maxilla (upper jaw) or mandible (lower jaw) images and we show a third technique to classify dental bitewing images as horizontally flipped/rotated or horizontally un-flipped/un-rotated. In our first technique I present an algorithm to classify whether a given dental periapical image is of a maxilla (upper jaw) or a mandible (lower jaw) using texture analysis of the jaw bone. While the bone analysis method is manual, in our second technique, I propose an automated approach for the identification of dental periapical images using the crown curve detection Algorithm. The third proposed algorithm works in an automated manner for a large number of database comprised of dental bitewing images. Each dental bitewing image in the data base can be classified as a horizontally flipped or un-flipped image in a time efficient manner.

Download Full-text

Scaffolds for Drug Delivery in Tissue Engineering

International Journal of Pharmaceutical Sciences and Nanotechnology ◽

10.37285/ijpsn.2008.1.2.1 ◽

2008 ◽

Vol 1 (2) ◽

pp. 113-123 ◽

Cited By ~ 2

Author(s):

Vikas V. Gaikwad ◽

Abasaheb B. Patil ◽

Madhuri V. Gaikwad

Keyword(s):

Drug Delivery ◽

Tissue Engineering ◽

Heart Diseases ◽

Cartilage Regeneration ◽

Tissue Growth ◽

The Body ◽

Patient Specific ◽

In Situ Gel ◽

Heart Muscle Cells

Scaffolds are used for drug delivery in tissue engineering as this system is a highly porous structure to allow tissue growth. Although several tissues in the body can regenerate, other tissue such as heart muscles and nerves lack regeneration in adults. However, these can be regenerated by supplying the cells generated using tissue engineering from outside. For instance, in many heart diseases, there is need for heart valve transplantation and unfortunately, within 10 years of initial valve replacement, 50–60% of patients will experience prosthesis associated problems requiring reoperation. This could be avoided by transplantation of heart muscle cells that can regenerate. Delivery of these cells to the respective tissues is not an easy task and this could be done with the help of scaffolds. In situ gel forming scaffolds can also be used for the bone and cartilage regeneration. They can be injected anywhere and can take the shape of a tissue defect, avoiding the need for patient specific scaffold prefabrication and they also have other advantages. Scaffolds are prepared by biodegradable material that result in minimal immune and inflammatory response. Some of the very important issues regarding scaffolds as drug delivery systems is reviewed in this article.

Download Full-text

Ferromagnetic soft catheter robots for minimally invasive bioprinting

Nature Communications ◽

10.1038/s41467-021-25386-w ◽

2021 ◽

Vol 12 (1) ◽

Author(s):

Cheng Zhou ◽

Youzhou Yang ◽

Jiaxin Wang ◽

Qingyang Wu ◽

Zhuozhi Gu ◽

...

Keyword(s):

Minimally Invasive ◽

The Body ◽

Magnetic Actuation ◽

Internal Organs ◽

Planar Surfaces ◽

Reinforced Polymer ◽

Direct Fabrication ◽

Digitally Controlled

AbstractIn vivo bioprinting has recently emerged as a direct fabrication technique to create artificial tissues and medical devices on target sites within the body, enabling advanced clinical strategies. However, existing in vivo bioprinting methods are often limited to applications near the skin or require open surgery for printing on internal organs. Here, we report a ferromagnetic soft catheter robot (FSCR) system capable of in situ computer-controlled bioprinting in a minimally invasive manner based on magnetic actuation. The FSCR is designed by dispersing ferromagnetic particles in a fiber-reinforced polymer matrix. This design results in stable ink extrusion and allows for printing various materials with different rheological properties and functionalities. A superimposed magnetic field drives the FSCR to achieve digitally controlled printing with high accuracy. We demonstrate printing multiple patterns on planar surfaces, and considering the non-planar surface of natural organs, we then develop an in situ printing strategy for curved surfaces and demonstrate minimally invasive in vivo bioprinting of hydrogels in a rat model. Our catheter robot will permit intelligent and minimally invasive bio-fabrication.

Download Full-text

Mammary-type Myofibroblastoma with Leiomyomatous Differentiation: A Rare Variant with Potential Pitfalls

International Journal of Surgical Pathology ◽

10.1177/10668969211031309 ◽

2021 ◽

pp. 106689692110313

Author(s):

Alexander M. Strait ◽

Julia A. Bridge ◽

Anthony J. Iafrate ◽

Marilyn M. Li ◽

Feng Xu ◽

...

Keyword(s):

Adipose Tissue ◽

Transcriptome Sequencing ◽

Smooth Muscle Actin ◽

The Body ◽

Muscle Actin ◽

Mature Adipose Tissue ◽

Spindle Cells ◽

Whole Transcriptome Sequencing ◽

Whole Transcriptome

Myofibroblastoma is a rare, benign stromal tumor with a diverse morphologic spectrum. Mammary-type myofibroblastoma (MTMF) is the extra-mammary counterpart of this neoplasm and its occurrence throughout the body has become increasingly recognized. Similar morphologic variations of MTMF have now been described which mirror those seen in the breast. We describe a case of intra-abdominal MTMF composed of short fascicles of eosinophilic spindle cells admixed with mature adipose tissue. The spindle cells stained diffusely positive for CD34, desmin, smooth muscle actin, and h-caldesmon by immunohistochemistry. Concurrent loss of RB1 (13q14) and 13q34 loci were confirmed by fluorescence in situ hybridization whereas anchored multiplex PCR and whole transcriptome sequencing did not reveal any pathognomonic fusions suggesting an alternative diagnosis. To the best of our knowledge this is the first documented case of leiomyomatous variant of MTMF.

Download Full-text

Tumor Microenvironment-Triggered In-Situ Cancer Vaccines with Dual Immunogenic Cell Death Inductions for Elevated Antitumor and Antimetastatic Therapy

Nanoscale ◽

10.1039/d1nr02018h ◽

2021 ◽

Author(s):

Jun Lin ◽

Binbin Ding ◽

Pan Zheng ◽

Dong Li ◽

Meifang Wang ◽

...

Keyword(s):

Cell Death ◽

Tumor Microenvironment ◽

Immune Responses ◽

Cancer Immunotherapy ◽

Cancer Vaccines ◽

High Specificity ◽

The Body ◽

Immunogenic Cell Death ◽

Specific Antigens

Cancer vaccine is to make tumor-specific antigens into vaccines, which then are injected back into the body to activate immune responses for cancer immunotherapy. Despite the high specificity and therapeutic...

Download Full-text