XVI.—Distribution in some Scottish Soils of an Inorganic Gel System related to “Allophane”

1966 ◽  
Vol 66 (16) ◽  
pp. 393-418 ◽  
Author(s):  
J. H. Kirkman ◽  
B. D. Mitchell ◽  
R. C. Mackenzie
Keyword(s):  
Quantitative Estimation ◽  
Soil Profiles ◽  
Chemical Dissolution ◽  
X Ray Diffraction ◽  
X Ray ◽  
Particle Size Fractions ◽  
North East ◽  
Infra Red ◽  
Optical Examination ◽  
Gel System

SynopsisSamples from the various horizons of five soil profiles representative of diverse types widely occurring in north-east Scotland were intensively examined, after separation into particle-size fractions, by appropriate instrumental and chemical techniques including optical examination, X-ray diffraction, electron microscopy and diffraction, infra-red absorption spectroscopy, thermal analysis procedures, chemical analysis and selective chemical dissolution. The results obtained are presented and assessed with respect to quantitative estimation of the mixed SiO2-Al2O3-Fe2O3 gel system occurring in these soils. At best results can be only semiquantitative, but interesting trends are observable in each profile and marked differences are noted between profiles on different parent materials, although this effect is somewhat obscured under impeded drainage conditions. The maturity of the soil is also a significant factor. Results in general can be explained in terms of current concepts on pedogenesis.

Chemical dissolution techniques in the study of soil clays: Part I

Clay Minerals ◽  
1965 ◽  
Vol 6 (1) ◽  
pp. 23-34 ◽  
Author(s):  
E. A. C. Follett ◽  
W. J. McHardy ◽  
B. D. Mitchell ◽  
B.F.L. Smith
Keyword(s):  
Infrared Absorption ◽  
Inorganic Material ◽  
Clay Fraction ◽  
Glacial Till ◽  
Soil Profiles ◽  
Chemical Dissolution ◽  
X Ray Diffraction ◽  
X Ray ◽  
Soil Clays ◽  
End Members

AbstractThe mineralogy of the clay fractions of two soil profiles representing the end-members of a catena developed on a glacial till derived from basic lavas has been determined. Particular attention has been given to the assessment of the nature of the amorphous inorganic material in the clay fraction of these soils. Chemical dissolution techniques were used and their effects on the clay fraction were followed by X-ray diffraction, differential thermal, infrared absorption, electron-optical and surface area measurements. The principal conclusion is that the soil clays are a continuum from completely disordered, through poorly ordered to well crystallized material.

Electron Microscopy of Human Gallstones

1971 ◽  
Vol 29 ◽  
pp. 296-297
Author(s):  
C. Wolpers ◽  
R. Blaschke
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Bile Pigment ◽  
X Ray Diffraction ◽  
Triclinic Crystal System ◽  
X Ray ◽  
Follow Up Study ◽  
Infra Red ◽  
Main Components

Scanning microscopy was used to study the surface of human gallstones and the surface of fractures. The specimens were obtained by operation, washed with water, dried at room temperature and shadowcasted with carbon and aluminum. Most of the specimens belong to patients from a series of X-ray follow-up study, examined during the last twenty years. So it was possible to evaluate approximately the age of these gallstones and to get information on the intensity of growing and solving.Cholesterol, a group of bile pigment substances and different salts of calcium, are the main components of human gallstones. By X-ray diffraction technique, infra-red spectroscopy and by chemical analysis it was demonstrated that all three components can be found in any gallstone. In the presence of water cholesterol crystallizes in pane-like plates of the triclinic crystal system.

PENGGUNAAN TiO2 PARTIKEL NANO HASIL SINTESIS BERBASIS AIR MENGGUNAKAN METODA SOL-GEL PADA BAHAN KAPAS SEBAGAI APLIKASI UNTUK TEKSTIL ANTI UV

Arena Tekstil ◽  
2013 ◽  
Vol 28 (1) ◽  
Author(s):  
Maya Komalasari ◽  
Bambang Sunendar
Keyword(s):  
Fourier Transform ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Sol Gel ◽  
Crosslinking Agent ◽  
X Ray Diffraction ◽  
Nano Tio2 ◽  
X Ray ◽  
Infra Red ◽  
Scanning Electron

Partikel nano TiO2 berbasis air dengan pH basa telah berhasil disintesis dengan menggunakan metode sol-gel dan diimobilisasi pada kain kapas dengan menggunakan kitosan sebagai zat pengikat silang. Sintesis dilakukan  dengan prekursor TiCl4 pada konsentrasi 0,3 M, 0,5 M dan 1 M, dan menggunakan templat kanji dengan proses kalsinasi pada suhu 500˚C selama 2 jam. Partikel nano TiO2 diaplikasikan ke kain kapas dengan metoda pad-dry-cure dan menggunakan kitosan sebagai crosslinking agent. Berdasarkan hasil Scanning Electron Microscope (SEM),diketahui bahwa morfologi partikel TiO2 berbentuk spherical dengan ukuran nano (kurang dari 100 nm). Karakterisasi X-Ray Diffraction (XRD) menunjukkan adanya tiga tipe struktur kristal utama, yaitu (100), (101) dan (102) dengan fasa kristal yang terbentuk adalah anatase dan rutile. Pada karakterisasi menggunakan SEM terhadap serbuk dari TiO2 yang telah diaplikasikan ke permukaan kain kapas, terlihat adanya imobilisasi partikel nano TiO2 melalui ikatan hidrogen silang dengan kitosan pada kain kapas. Hasil analisa tersebut kemudian dikonfirmasi dengan FTIR (Fourier Transform Infra Red) yang hasilnya memperlihatkan puncak serapan pada bilangan gelombang 3495 cm-1, 2546 cm-1, dan 511 cm-1,  yang masing-masing diasumsikan sebagai adanya vibrasi gugus fungsi O-H, N-H dan Ti-O-Ti. Hasil SEM menunjukkan pula bahwa kristal nano yang terbentuk diantaranya adalah fasa rutile , yang berdasarkan literatur terbukti dapatberfungsi sebagai anti UV.

A study on using expanded perlite with hydroxyapatite: Reinforced bio-composites

2021 ◽  
pp. 095441192199656
Author(s):  
Erdoğan Karip ◽  
Mehtap Muratoğlu
Keyword(s):  
Body Fluid ◽  
Xrd Analysis ◽  
Cold Isostatic Pressing ◽  
Expanded Perlite ◽  
X Ray Diffraction ◽  
Pressing Method ◽  
X Ray ◽  
Infra Red ◽  
Ft Ir

People are exposed to different kinds of diseases or various accidents in life. Hydroxyapatite (HA) has been widely employed for bone treatment applications. In this study, HA was extracted from sheep bones. Bio-composites were doped with 1, 5, and 10 wt.% of expanded perlite and 5 wt.% of ZrO2–MgO-P2O5. The bio-composites were prepared by the cold isostatic pressing method (250 MPa) and sintered at 900°C for 1 h. In order to evaluate the characteristics of the bio-composites, microhardness, density, X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) analyses were carried out on them. Additionally, the specimens whose characteristics were determined were kept in synthetic body fluid (SBF), and their in vitro behavior was examined. As a result, it was observed that microhardness increased as both the weight and the grain size of the expanded perlite were increased. Calcium silicate, tri-calcium phosphate, and hydroxyapatite were observed in the XRD analysis of all samples, and the formation of apatite structures was increased by addition of ZrO2–MgO–P2O5.

scholarly journals Influence of the Presence of Different Alkali Cations and the Amount of Fe(CN)6 Vacancies on CO2 Adsorption on Copper Hexacyanoferrates

Materials ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3371 ◽  
Author(s):  
Svensson ◽  
Grins ◽  
Eklöf ◽  
Eriksson ◽  
Wardecki ◽  
...  
Keyword(s):  
Thermogravimetric Analysis ◽  
Prussian Blue ◽  
Co2 Adsorption ◽  
X Ray Diffraction ◽  
Alkali Cations ◽  
Prussian Blue Analogue ◽  
X Ray ◽  
Infra Red ◽  
Adsorption Desorption ◽  
Adsorption Capability

The CO2 adsorption on various Prussian blue analogue hexacyanoferrates was evaluated by thermogravimetric analysis. Compositions of prepared phases were verified by energy-dispersive X-ray spectroscopy, infra-red spectroscopy and powder X-ray diffraction. The influence of different alkali cations in the cubic Fm3m structures was investigated for nominal compositions A2/3Cu[Fe(CN)6]2/3 with A = vacant, Li, Na, K, Rb, Cs. The Rb and Cs compounds show the highest CO2 adsorption per unit cell, 3.3 molecules of CO2 at 20 C and 1 bar, while in terms of mmol/g the Na compound exhibits the highest adsorption capability, 3.8 mmol/g at 20 C and 1 bar. The fastest adsorption/desorption is exhibited by the A-cation free compound and the Li compound. The influence of the amount of Fe(CN)6 vacancies were assessed by determining the CO2 adsorption capabilities of Cu[Fe(CN)6]1/2 (Fm3m symmetry, nominally 50% vacancies), KCu[Fe(CN)6]3/4 (Fm3m symmetry, nominally 25% vacancies), and CsCu[Fe(CN)6] (I-4m2 symmetry, nominally 0% vacancies). Higher adsorption was, as expected, shown on compounds with higher vacancy concentrations.

The Characteristic Evaluation of Hydroxyapatite Powders Synthesized from CaCO3 Refined from Oyster Shell and H3PO4

2006 ◽  
Vol 118 ◽  
pp. 639-644
Author(s):  
Hye Sung Kim ◽  
Su Chak Ryu
Keyword(s):  
Bone Density ◽  
Inductively Coupled Plasma ◽  
Oyster Shell ◽  
Atomic Emission ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Infra Red ◽  
Ft Ir

Hydroxyapatite (Ca10(PO4)6(OH)2, HAp) powders is synthesized using the mixed powders of CaCO3 refined from oyster shells and phosphoric acid (H3PO4-98%, Daejung) as starting materials. The characteristic evaluation and chemical analysis of the synthesized powders is performed by X-ray diffraction (XRD), Fourier-transformed infra-red spectroscopy (FT-IR), and inductively-coupled plasma atomic emission spectroscopy (ICPAES). XRD analysis of synthetic powder by heat treatment at 1300°C for 2hrs shows only HAp peaks corresponding to stoichiometric HAp. It is confirmed by ICP-AES test that impurities such as Zn, In, Ti, Ba, Cd, Pb, and Mn, is not detected at all, but small amounts of Ti and Be is observed (0.099ppm Ti and 0.002ppm Ba). Variation of bone density is measured by giving medication of HAp powder with drinking water into human body continuously for three month. After the medication, the bone density is higher than the medication before. This means that HAp powder made from this process can be used as improver of bone density.

Thermal-induced transformation of glutamic acid to pyroglutamic acid and self-cocrystallization: a charge–density analysis

2022 ◽  
Vol 78 (2) ◽  
Author(s):  
Sehrish Akram ◽  
Arshad Mehmood ◽  
Sajida Noureen ◽  
Maqsood Ahmed
Keyword(s):  
Hydrogen Bonds ◽  
Glutamic Acid ◽  
Single Crystal ◽  
Diffraction Data ◽  
Density Functional ◽  
Quantitative Estimation ◽  
Topological Analysis ◽  
Pyroglutamic Acid ◽  
X Ray Diffraction ◽  
X Ray

Thermal-induced transformation of glutamic acid to pyroglutamic acid is well known. However, confusion remains over the exact temperature at which this happens. Moreover, no diffraction data are available to support the transition. In this article, we make a systematic investigation involving thermal analysis, hot-stage microscopy and single-crystal X-ray diffraction to study a one-pot thermal transition of glutamic acid to pyroglutamic acid and subsequent self-cocrystallization between the product (hydrated pyroglutamic acid) and the unreacted precursor (glutamic acid). The melt upon cooling gave a robust cocrystal, namely, glutamic acid–pyroglutamic acid–water (1/1/1), C5H7NO3·C5H9NO4·H2O, whose structure has been elucidated from single-crystal X-ray diffraction data collected at room temperature. A three-dimensional network of strong hydrogen bonds has been found. A Hirshfeld surface analysis was carried out to make a quantitative estimation of the intermolecular interactions. In order to gain insight into the strength and stability of the cocrystal, the transferability principle was utilized to make a topological analysis and to study the electron-density-derived properties. The transferred model has been found to be superior to the classical independent atom model (IAM). The experimental results have been compared with results from a multipolar refinement carried out using theoretical structure factors generated from density functional theory (DFT) calculations. Very strong classical hydrogen bonds drive the cocrystallization and lend stability to the resulting cocrystal. Important conclusions have been drawn about this transition.

Study of the distribution of the molecular orientation in thick polyethylene samples by X-ray diffraction, infra-red dichroism and Raman spectroscopy

Polymer ◽  
1993 ◽  
Vol 34 (24) ◽  
pp. 5029-5037 ◽  
Author(s):  
Claude-Paul Lafrance ◽  
Paul Chabot ◽  
Marie Pigeon ◽  
Robert E Prud'homme ◽  
Michel Pézolet
Keyword(s):  
Raman Spectroscopy ◽  
Molecular Orientation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Infra Red

scholarly journals Peningkatan Kelarutan dan Laju Disolusi Glimepirid Melalui Metode Kokristalisasi

2017 ◽  
Vol 4 (1) ◽  
pp. 35
Author(s):  
Fitrianti Darusman ◽  
Sundani N Soewandhi ◽  
Rachmat Mauludin
Keyword(s):  
Fourier Transform ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
X Ray Diffraction ◽  
X Ray ◽  
Infra Red ◽  
Scanning Electron

Telah dilakukan kokristalisasi glimepirid (GMP) dengan asam oksalat (AO) menggunakan metode penggilingan dan pelarutan (menggunakan pelarut aseton). Diagram fase sistem biner GMP-AO digunakan untuk identifikasi awal pembentukan interaksi antar kedua komponen serta ditegaskan kembali dengan analisis mikroskopik menggunakan alat pemanas (hot stage) yang dihubungkan dengan mikroskop polarisasi. Padatan hasil kokristalisasi dikarakterisasi dengan metode analisis termal (Differential Scanning Calorymetry), difraktometri sinar-X serbuk (Powder X-Ray Diffraction), spektrofotometri inframerah (Fourier Transform-Infra Red) dan mikroskopi (Scanning Electron Microscope). Hasil identifikasi dan karakterisasi menunjukkan interaksi eutektik antara kedua fase kristalin GMP-AO dalam keadaan padat pada perbandingan molar 3:7, dengan titik eutektik pada temperatur 128,7°C. Selanjutnya, uji kelarutan dan laju disolusinya menggunakan media dapar fosfat pH 7,4. Kelarutan dan laju disolusi GMP hasil kokristalisasi meningkat dibandingkan dengan campuran fisika dan senyawa tunggalnya.Kata kunci : glimepirid, kokristalisasi, eutektik, kelarutan dan laju disolusi.

Sign in / Sign up

Export Citation Format

Share Document