scholarly journals Tests of a Gust-Alleviating Flap in the Gust Tunnel

1940 ◽  
Vol 44 (351) ◽  
pp. 283-294 ◽  
Author(s):  
Philip Donely ◽  
C. C. Shufflebarger
Keyword(s):  
Experimental Results ◽  
Sharp Edge ◽  
Wing Loading ◽  
Longitudinal Stability ◽  
Maximum Acceleration ◽  
Long Period ◽  
Good Agreement ◽  
Made In

SummaryTests were made in the N.A.C.A. gust tunnel to determine the effectiveness of a long-period dynamically overbalanced flap in reducing aeroplane accelerations due to atmospheric gusts. For two gust shapes, one gust velocity, one forward velocity, and one wing loading, a series of flights was made with the flap locked and was then repeated with the flap free to operate. The records obtained were evaluated by routine methods.The results indicate that the flap reduced the maximum acceleration increment 39 per cent, for a severe gust with a representative gust gradient distance of 8 chord lengths and that, for an extreme gust shape (a sharp-edge gust), the reduction was only 3 per cent. The results also indicate that the flap tended to reduce the longitudinal stability of the aeroplane. Computations made of the effectiveness and the action of the flap were in good agreement with the experimental results.

Machining Forces: Some Effects of Tool Vibration

1965 ◽  
Vol 7 (2) ◽  
pp. 152-162 ◽  
Author(s):  
P. W. Wallace ◽  
C. Andrew
Keyword(s):  
Thrust Force ◽  
Chip Thickness ◽  
Experimental Results ◽  
Tool Vibration ◽  
Undeformed Chip Thickness ◽  
Speed Range ◽  
Theoretical Predictions ◽  
Thrust Forces ◽  
Good Agreement ◽  
Made In

When tool vibration occurs during machining both the undeformed chip thickness and the cutting forces have oscillating components. An examination of previous work reveals that both the relative phases and amplitudes of the oscillating forces and the oscillating undeformed chip thickness can be affected appreciably by changes in frequency. The explanations for this behaviour which have been put forward are not entirely consistent with previous experimental evidence. In the present work an analysis of the thrust forces occurring during tool vibration is proposed. The analysis is based on the assumption that there are two components to the oscillating thrust force: (1) a component proportional to, and in phase with, the oscillations in undeformed chip thickness and (2) a component, caused by contact between a small area of the tool flank and the freshly cut work surface, which leads the oscillation in undeformed chip thickness by 90°. Experimental results are presented which validate the assumptions made in the analysis. On applying the analysis to present and past experimental results, there is good agreement between theory and experiment when cutting at sufficient speed to prevent the formation of a substantial built-up edge: when cutting within the built-up edge speed range the theoretical predictions are less satisfactory, though still qualitatively correct. The results also show that changes in undeformed chip thickness have a smaller effect on the tool forces under vibratory conditions than under steady conditions.

Inducing Frictional Force to Enhance the Transient Response in Beams

2019 ◽  
Vol 22 (2) ◽  
pp. 88-93
Author(s):  
Hamed Khanger Mina ◽  
Waleed K. Al-Ashtrai
Keyword(s):  
Numerical Analysis ◽  
Transient Response ◽  
Frictional Force ◽  
Damping Ratio ◽  
Experimental Results ◽  
Damping Capacity ◽  
Tightening Force ◽  
Contact Areas ◽  
Good Agreement ◽  
Ansys Workbench

This paper studies the effect of contact areas on the transient response of mechanical structures. Precisely, it investigates replacing the ordinary beam of a structure by two beams of half the thickness, which are joined by bolts. The response of these beams is controlled by adjusting the tightening of the connecting bolts and hence changing the magnitude of the induced frictional force between the two beams which affect the beams damping capacity. A cantilever of two beams joined together by bolts has been investigated numerically and experimentally. The numerical analysis was performed using ANSYS-Workbench version 17.2. A good agreement between the numerical and experimental results has been obtained. In general, results showed that the two beams vibrate independently when the bolts were loosed and the structure stiffness is about 20 N/m and the damping ratio is about 0.008. With increasing the bolts tightening, the stiffness and the damping ratio of the structure were also increased till they reach their maximum values when the tightening force equals to 8330 N, where the structure now has stiffness equals to 88 N/m and the damping ratio is about 0.062. Beyond this force value, increasing the bolts tightening has no effect on stiffness of the structure while the damping ratio is decreased until it returned to 0.008 when the bolts tightening becomes immense and the beams behave as one beam of double thickness.

PHOTOINDUCED NONLINEAR OCTUPOLAR POLARIZATION: TRANSIENT AND PERMANENT REGIMES

1996 ◽  
Vol 05 (04) ◽  
pp. 653-670 ◽  
Author(s):  
CÉLINE FIORINI ◽  
JEAN-MICHEL NUNZI ◽  
FABRICE CHARRA ◽  
IFOR D.W. SAMUEL ◽  
JOSEPH ZYSS
Keyword(s):  
Theoretical Analysis ◽  
Second Harmonic ◽  
Experimental Results ◽  
Polar Field ◽  
Rotational Spectrum ◽  
Dual Frequency ◽  
One Dimensional ◽  
Ethyl Violet ◽  
Disperse Red 1 ◽  
Good Agreement

An original poling method using purely optical means and based on a dual-frequency interference process is presented. We show that the coherent superposition of two beams at fundamental and second-harmonic frequencies results in a polar field with an irreducible rotational spectrum containing both a vector and an octupolar component. This enables the method to be applied even to molecules without a permanent dipole such as octupolar molecules. After a theoretical analysis of the process, we describe different experiments aiming at light-induced noncentrosymmetry performed respectively on one-dimensional Disperse Red 1 and octupolar Ethyl Violet molecules. Macroscopic octupolar patterning of the induced order is demonstrated in both transient and permanent regimes. Experimental results show good agreement with theory.

scholarly journals Helical growth during the phototropic response, avoidance response, and in stiff mutants of Phycomyces blakesleeanus

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Joseph K. E. Ortega ◽  
Revathi P. Mohan ◽  
Cindy M. Munoz ◽  
Shankar Lalitha Sridhar ◽  
Franck J. Vernerey
Keyword(s):  
Avoidance Response ◽  
Experimental Results ◽  
Sensory Transduction ◽  
Growth Responses ◽  
Phycomyces Blakesleeanus ◽  
Sensory Stimuli ◽  
Phototropic Response ◽  
Biophysical Models ◽  
Helical Growth ◽  
Made In

AbstractThe sporangiophores of Phycomyces blakesleeanus have been used as a model system to study sensory transduction, helical growth, and to establish global biophysical equations for expansive growth of walled cells. More recently, local statistical biophysical models of the cell wall are being constructed to better understand the molecular underpinnings of helical growth and its behavior during the many growth responses of the sporangiophores to sensory stimuli. Previous experimental and theoretical findings guide the development of these local models. Future development requires an investigation of explicit and implicit assumptions made in the prior research. Here, experiments are conducted to test three assumptions made in prior research, that (a) elongation rate, (b) rotation rate, and (c) helical growth steepness, R, of the sporangiophore remain constant during the phototropic response (bending toward unilateral light) and the avoidance response (bending away from solid barriers). The experimental results reveal that all three assumptions are incorrect for the phototropic response and probably incorrect for the avoidance response but the results are less conclusive. Generally, the experimental results indicate that the elongation and rotation rates increase during these responses, as does R, indicating that the helical growth steepness become flatter. The implications of these findings on prior research, the “fibril reorientation and slippage” hypothesis, global biophysical equations, and local statistical biophysical models are discussed.

scholarly journals Comparison of Experimental and Numerical Transient Drop Deformation during Transition through Orifices in High-Pressure Homogenizers

2021 ◽  
Vol 5 (3) ◽  
pp. 32
Author(s):  
Benedikt Mutsch ◽  
Peter Walzel ◽  
Christian J. Kähler
Keyword(s):  
High Pressure ◽  
Visual Analysis ◽  
Imaging Technique ◽  
Extensional Flow ◽  
Droplet Breakup ◽  
Experimental Results ◽  
Drop Deformation ◽  
Droplet Deformation ◽  
Shadow Imaging ◽  
Good Agreement

The droplet deformation in dispersing units of high-pressure homogenizers (HPH) is examined experimentally and numerically. Due to the small size of common homogenizer nozzles, the visual analysis of the transient droplet generation is usually not possible. Therefore, a scaled setup was used. The droplet deformation was determined quantitatively by using a shadow imaging technique. It is shown that the influence of transient stresses on the droplets caused by laminar extensional flow upstream the orifice is highly relevant for the droplet breakup behind the nozzle. Classical approaches based on an equilibrium assumption on the other side are not adequate to explain the observed droplet distributions. Based on the experimental results, a relationship from the literature with numerical simulations adopting different models are used to determine the transient droplet deformation during transition through orifices. It is shown that numerical and experimental results are in fairly good agreement at limited settings. It can be concluded that a scaled apparatus is well suited to estimate the transient droplet formation up to the outlet of the orifice.

Simulation of Sphere’s Motion Induced by Shock Waves

2012 ◽  
Vol 134 (10) ◽  
Author(s):  
Dan Igra ◽  
Ozer Igra ◽  
Lazhar Houas ◽  
Georges Jourdan
Keyword(s):  
Shock Waves ◽  
Drag Coefficient ◽  
Drag Force ◽  
Stationary Flow ◽  
Experimental Results ◽  
Experimental Findings ◽  
Sphere Drag ◽  
Simulation Scheme ◽  
Good Agreement

Simulations of experimental results appearing in Jourdan et al. (2007, “Drag Coefficient of a Sphere in a Non-Stationary Flow: New Results,”Proc. R. Soc. London, Ser. A, 463, pp. 3323–3345) regarding acceleration of a sphere by the postshock flow were conducted in order to find the contribution of the various parameters affecting the sphere drag force. Based on the good agreement found between present simulations and experimental findings, it is concluded that the proposed simulation scheme could safely be used for evaluating the sphere’s motion in the postshock flow.

scholarly journals An approach to the modeling of a virtual thermal manikin

2014 ◽  
Vol 18 (4) ◽  
pp. 1413-1423 ◽  
Author(s):  
Dragan Ruzic ◽  
Sinisa Bikic
Keyword(s):  
Turbulence Models ◽  
Thermal Conditions ◽  
Heat Fluxes ◽  
Thermal Manikin ◽  
Flow Conditions ◽  
Body Segments ◽  
Nominal Size ◽  
Natural Flow ◽  
Good Agreement ◽  
Made In

The aim of the research described in this paper, is to make a virtual thermal manikin that would be simple, but also robust and reliable. The virtual thermal manikin was made in order to investigate thermal conditions inside vehicle cabins. The main parameters of the presented numerical model that were investigated in this paper are mesh characteristics and turbulence models. Heat fluxes on the manikin's body segments obtained from the simulations were compared with published results, from three different experiments done on physical thermal manikins. The presented virtual thermal manikin, meshed with surface elements of 0.035 m in nominal size (around 13,600 surface elements) and in conjunction with the two-layer RANS Realizable k-? turbulence model, had generally good agreement with experimental data in both forced and natural flow conditions.

Viscoelastic Deformation of PC/ABS Alloy

2007 ◽  
Vol 353-358 ◽  
pp. 1229-1232
Author(s):  
Z.N. Yin ◽  
L.F. Fan ◽  
Tie Jun Wang
Keyword(s):  
Dynamic Mechanical Analysis ◽  
Relaxation Modulus ◽  
Mechanical Analysis ◽  
Experimental Results ◽  
Viscoelastic Deformation ◽  
Dynamic Mechanical ◽  
Storage And Loss Moduli ◽  
Static Relaxation ◽  
Comparison Of The Results ◽  
Good Agreement

Dynamic Mechanical Analysis (DMA) and static relaxation tests are carried out to study the viscoelastic deformation of PC/ABS alloy with blending ratio of PC to ABS being 50/50. A modified approach is developed to calculate the relaxation modulus of PC/ABS alloy from the DMA experimental results of storage and loss moduli. Comparison of the results obtained from DMA and static relaxation tests is presented and good agreement is found.

scholarly journals Improved Refractive Index Sensitivity Utilizing Long-Period Gratings with Periodic Corrugations on Cladding

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Anthony Lim ◽  
Wen Bin Ji ◽  
Swee Chuan Tjin
Keyword(s):  
Refractive Index ◽  
Cost Effective ◽  
Experimental Results ◽  
Refractive Index Sensitivity ◽  
Long Period ◽  
Specimen Collection ◽  
Long Period Gratings ◽  
Highly Sensitive ◽  
Index Sensitivity

A new structure of Long-Period Gratings (LPGs) sensor is introduced as a sensitive ambient RI sensor. This structure consists of creating periodic corrugations on the cladding of the LPG. The experimental results show that this LPG structure has good performances in terms of linearity and sensitivity and serves as a highly sensitive and cost-effective sensor. It also has the advantage of portability as the corrugation can also serve as the reservoir for the specimen collection to be tested.

Influence of the Morphology on the Optical Properties of Nanocermet Films: A Renormalization Approach

1990 ◽  
Vol 195 ◽  
Author(s):  
S. Berthier ◽  
K. Driss-Khodja
Keyword(s):  
Optical Properties ◽  
Critical Exponents ◽  
Inhomogeneous Media ◽  
Experimental Results ◽  
Percolation Transition ◽  
Position Space ◽  
Renormalization Approach ◽  
2D And 3D ◽  
Good Agreement ◽  
Effective Medium Models

ABSTRACTIn order to take into account the actual morphology of the inhomogeneous media, we have developed, effective medium models based on a 2D and 3D position space renormalization /1,2/. These models predict the dipolar resonance and the percolation transition with critical exponents in good agreement with theoretical values and fairly reproduce most of the experimental results, whatever the concentration is. Further more, this allows a valuable comparison of the predictions of our models when applied on different lattices like real digitized TEM of cermet films or randomly occupied lattices.

Sign in / Sign up

Export Citation Format

Share Document