The Structure and Development of Microbodies in the Fat Body and other Tissues of an Insect (Calpodes Ethlius)

1970 ◽  
Vol 28 ◽  
pp. 148-149
Author(s):  
M. Locke ◽  
J. T. McMahon
Keyword(s):  
Electron Microscopy ◽  
Liquid Crystals ◽  
Fat Body ◽  
Competitive Inhibitor ◽  
Dense Core ◽  
Urate Oxidase ◽  
Blood Proteins ◽  
Free Base ◽  
The Core ◽  
The Matrix

The fat body of insects has always been compared functionally to the liver of vertebrates. Both synthesize and store glycogen and lipid and are concerned with the formation of blood proteins. The comparison becomes even more apt with the discovery of microbodies and the localization of urate oxidase and catalase in insect fat body.The microbodies are oval to spherical bodies about 1μ across with a depression and dense core on one side. The core is made of coiled tubules together with dense material close to the depressed membrane. The tubules may appear loose or densely packed but always intertwined like liquid crystals, never straight as in solid crystals (Fig. 1). When fat body is reacted with diaminobenzidine free base and H2O2 at pH 9.0 to determine the distribution of catalase, electron microscopy shows the enzyme in the matrix of the microbodies (Fig. 2). The reaction is abolished by 3-amino-1, 2, 4-triazole, a competitive inhibitor of catalase. The fat body is the only tissue which consistantly reacts positively for urate oxidase. The reaction product is sharply localized in granules of about the same size and distribution as the microbodies. The reaction is inhibited by 2, 6, 8-trichloropurine, a competitive inhibitor of urate oxidase.

Toughening of PBT/PC blends with epoxy functionalized core-shell modifiers

e-Polymers ◽  
2009 ◽  
Vol 9 (1) ◽  
Author(s):  
Fangfang Zhang ◽  
Shulin Sun ◽  
Xiaoyun Liu ◽  
Lixia Zhang ◽  
Huixuan Zhang
Keyword(s):  
Electron Microscopy ◽  
Glycidyl Methacrylate ◽  
Core Shell ◽  
Bisphenol A Polycarbonate ◽  
Elongation At Break ◽  
The Core ◽  
Transmission Electron ◽  
Partially Miscible ◽  
The Matrix ◽  
Izod Impact

AbstractCore-shell modifiers of MB-g-GMA have been synthesized by emulsion polymerization technique. For these modifiers, the core is made up of the crosslinked poly(butadiene) and the shell is methyl methacrylate (MMA) and glycidyl methacrylate (GMA) copolymer. These modifiers were used to toughen poly(butylene terephthalate) (PBT)/bisphenol A polycarbonate (PC) blends. The mechanical properties showed that the addition of 15% MB-g-GMA had a very good influence on the notched Izod impact strength and elongation at break of the PBT/PC blends. DMA results showed PBT was partially miscible with PC and the addition of MB-g-GMA further improved the miscibility of PBT and PC. DSC tests further testified the introduction of MB-g-GMA improved miscibility between PBT and PC. Scanning electron microscopy (SEM) displayed a very good dispersion of MB-g-GMA particles in PBT/PC blend. Transmission electron microscopy (TEM) proved MB-g-GMA particles were enveloped by a thin layer of PC, PBT and PC showed co-continuous structure or dispersed phase which depended on the content of MB-g-GMA. SEM results showed shear yielding of the matrix and cavitation of rubber particles were the major toughening mechanisms.

scholarly journals THE ORIGIN AND FATE OF MICROBODIES IN THE FAT BODY OF AN INSECT

1971 ◽  
Vol 48 (1) ◽  
pp. 61-78 ◽  
Author(s):  
M. Locke ◽  
J. T. McMahon
Keyword(s):  
Life History ◽  
Larval Stage ◽  
Insect Cells ◽  
Fat Body ◽  
Urate Oxidase ◽  
The Core ◽  
History Of ◽  
Dense Mass ◽  
Hormonal Milieu ◽  
Larval Molt

The structure and life history of insect microbodies are described during the development of the fat body from the 4th to 5th larval molt through the 5th to pupal molt. The mature microbodies are flattened spheres about 1.1 x 0.9 µ, with a depression on one side where a dense mass connects the limiting membrane to the core of coiled tubules. They contain catalase and urate oxidase. The precise synchrony of development of insect cells during the molt/intermolt cycle makes it easy to study the life history of particular organelles. Phases of growth are correlated with the hormonal milieu. Mature 4th stage microbodies decrease in size before ecdysis to the 5th stage when they atrophy at the same time as the new 5th stage generation arises. The 5th stage microbodies form as diverticula of the RER and, grow while confronted by RER cisternae. The mature microbodies decrease in size when the fat body engages in massive larval syntheses. At the end of the 5th larval stage, the microbodies are invested by isolation membranes and destroyed before pupation. There are thus two mechanisms for microbody destruction: atrophy of the 4th stage organelles and isolation with autophagy at the end of the 5th stage.

Electron microscopy and diffraction studies of polyimides

1983 ◽  
Vol 41 ◽  
pp. 28-29
Author(s):  
O.C. de Hodgins ◽  
K. R. Lawless ◽  
R. Anderson
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Structural Features ◽  
Inert Atmosphere ◽  
Polyimide Films ◽  
Resolution Electron ◽  
The Matrix ◽  
High Resolution Electron Microscope ◽  
Diffraction Patterns ◽  
Polymeric Samples

Commercial polyimide films have shown to be homogeneous on a scale of 5 to 200 nm. The observation of Skybond (SKB) 705 and PI5878 was carried out by using a Philips 400, 120 KeV STEM. The objective was to elucidate the structural features of the polymeric samples. The specimens were spun and cured at stepped temperatures in an inert atmosphere and cooled slowly for eight hours. TEM micrographs showed heterogeneities (or nodular structures) generally on a scale of 100 nm for PI5878 and approximately 40 nm for SKB 705, present in large volume fractions of both specimens. See Figures 1 and 2. It is possible that the nodulus observed may be associated with surface effects and the structure of the polymers be regarded as random amorphous arrays. Diffraction patterns of the matrix and the nodular areas showed different amorphous ring patterns in both materials. The specimens were viewed in both bright and dark fields using a high resolution electron microscope which provided magnifications of 100,000X or more on the photographic plates if desired.

Electron Microscopy of Bacteriophage T7 Internal Head Proteins

1975 ◽  
Vol 33 ◽  
pp. 638-639
Author(s):  
P. Serwer
Keyword(s):  
Electron Microscopy ◽  
Bacteriophage T7 ◽  
Specimen Preparation ◽  
Dna Molecule ◽  
The Core ◽  
Internal Core ◽  
Phage T7 ◽  
T7 Phage ◽  
Preparation Techniques ◽  
Internal Head

The genome of bacteriophage T7 is a duplex DNA molecule packaged in a space whose volume has been measured to be 2.2 x the volume of the B form of T7 DNA. To help determine the mechanism for packaging this DNA, the configuration of proteins inside the phage head has been investigated by electron microscopy. A core which is roughly cylindrical in outline has been observed inside the head of phage T7 using three different specimen preparation techniques.When T7 phage are treated with glutaraldehyde, DNA is ejected from the head often revealing an internal core (dark arrows in Fig. 1). When both the core and tail are present in a particle, the core appears to be coaxial with the tail. Core-tail complexes sometimes dislodge from their normal location and appear attached to the outside of a phage head (light arrow in Fig. 1).

Using crystallographic symmetry in diffraction and contrast analysis

1989 ◽  
Vol 47 ◽  
pp. 504-505
Author(s):  
U. Dahmen ◽  
K.H. Westmacott
Keyword(s):  
Electron Microscopy ◽  
High Symmetry ◽  
Two Phase ◽  
Tem Analysis ◽  
Crystallographic Symmetry ◽  
The Matrix ◽  
Contrast Analysis ◽  
Practical Tool ◽  
Convergent Beam ◽  
Beam Diffraction

Despite the increased use of convergent beam diffraction, symmetry concepts in their more general form are not commonly applied as a practical tool in electron microscopy. Crystal symmetry provides an abundance of information that can be used to facilitate and improve the TEM analysis of crystalline solids. This paper draws attention to some aspects of symmetry that can be put to practical use in the analysis of structures and morphologies of two-phase materials.It has been shown that the symmetry of the matrix that relates different variants of a precipitate can be used to determine the axis of needle- or lath-shaped precipitates or the habit plane of plate-shaped precipitates. By tilting to a special high symmetry orientation of the matrix and by measuring angles between symmetry-related variants of the precipitate it is possible to find their habit from a single micrograph.

scholarly journals A clarified typology of core-periphery structure in networks

2021 ◽  
Vol 7 (12) ◽  
pp. eabc9800
Author(s):  
Ryan J. Gallagher ◽  
Jean-Gabriel Young ◽  
Brooke Foucault Welles
Keyword(s):  
Dense Core ◽  
Block Model ◽  
Hub And Spoke ◽  
Block Modeling ◽  
Domain Specific ◽  
The Core ◽  
Detailed Case ◽  
Rich Diversity ◽  
Modeling Techniques

Core-periphery structure, the arrangement of a network into a dense core and sparse periphery, is a versatile descriptor of various social, biological, and technological networks. In practice, different core-periphery algorithms are often applied interchangeably despite the fact that they can yield inconsistent descriptions of core-periphery structure. For example, two of the most widely used algorithms, the k-cores decomposition and the classic two-block model of Borgatti and Everett, extract fundamentally different structures: The latter partitions a network into a binary hub-and-spoke layout, while the former divides it into a layered hierarchy. We introduce a core-periphery typology to clarify these differences, along with Bayesian stochastic block modeling techniques to classify networks in accordance with this typology. Empirically, we find a rich diversity of core-periphery structure among networks. Through a detailed case study, we demonstrate the importance of acknowledging this diversity and situating networks within the core-periphery typology when conducting domain-specific analyses.

scholarly journals Oxygen Induced Phase Transformation in TC21 Alloy with a Lamellar Microstructure

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 163
Author(s):  
Shu Wang ◽  
Yilong Liang ◽  
Hao Sun ◽  
Xin Feng ◽  
Chaowen Huang
Keyword(s):  
Electron Microscopy ◽  
Phase Transformation ◽  
Oxygen Uptake ◽  
Titanium Alloys ◽  
Electron Backscatter Diffraction ◽  
Lamellar Microstructure ◽  
Α Phase ◽  
Transmission Electron ◽  
The Matrix ◽  
Oxygen Ingress

The main objective of the present study was to understand the oxygen ingress in titanium alloys at high temperatures. Investigations reveal that the oxygen diffusion layer (ODL) caused by oxygen ingress significantly affects the mechanical properties of titanium alloys. In the present study, the high-temperature oxygen ingress behavior of TC21 alloy with a lamellar microstructure was investigated. Microstructural characterizations were analyzed through optical microscopy (OM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). Obtained results demonstrate that oxygen-induced phase transformation not only enhances the precipitation of secondary α-phase (αs) and forms more primary α phase (αp), but also promotes the recrystallization of the ODL. It was found that as the temperature of oxygen uptake increases, the thickness of the ODL initially increases and then decreases. The maximum depth of the ODL was obtained for the oxygen uptake temperature of 960 °C. In addition, a gradient microstructure (αp + β + βtrans)/(αp + βtrans)/(αp + β) was observed in the experiment. Meanwhile, it was also found that the hardness and dislocation density in the ODL is higher than that that of the matrix.

Atomic-scale structural and compositional analyses of Ruddlesden-Popper planar faults in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics

2009 ◽  
Vol 24 (8) ◽  
pp. 2596-2604 ◽  
Author(s):  
Sašo Šturm ◽  
Makoto Shiojiri ◽  
Miran Čeh
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Atomic Scale ◽  
Transmission Electron ◽  
Initial Stage ◽  
Final Microstructure ◽  
Scanning Transmission ◽  
The Matrix ◽  
Annular Dark Field

The microstructure in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics is strongly affected by the formation of Ruddlesden-Popper fault–rich (RP fault) lamellae, which are coherently intergrown with the matrix of the perovskite grains. We studied the structure and chemistry of RP faults by applying quantitative high-resolution transmission electron microscopy and high-angle annular dark-field scanning transmission electron microscopy analyses. We showed that the Sr2+ and Ca2+ dopant ions form RP faults during the initial stage of sintering. The final microstructure showed preferentially grown RP fault lamellae embedded in the central part of the anisotropic perovskite grains. In contrast, the dopant Ba2+ ions preferably substituted for Sr2+ in the SrTiO3 matrix by forming a BaxSr1−xTiO3 solid solution. The surplus of Sr2+ ions was compensated structurally in the later stages of sintering by the formation of SrO-rich RP faults. The resulting microstructure showed RP fault lamellae located at the surface of equiaxed BaxSr1-xTiO3 perovskite grains.

Characteristics of Ni–Cr–Fe laser clad layers on EA4T steel

2017 ◽  
Vol 31 (16-19) ◽  
pp. 1744031
Author(s):  
Wenjing Chen ◽  
Hui Chen ◽  
Yongjing Wang ◽  
Congchen Li ◽  
Xiaoli Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cladding Layer ◽  
Metallurgical Bonding ◽  
The Matrix ◽  
Feeding Speed ◽  
Upper Bainite ◽  
Scanning Electron

The Ni–Cr–Fe metal powder was deposited on EA4T steel by laser cladding technology. The microstructure and chemical composition of the cladding layer were analyzed by optical microscopy (OM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The bonding ability between the cladding layer and the matrix was measured. The results showed that the bonding between the cladding layer and the EA4T steel was metallurgical bonding. The microstructure of cladding layer was composed of planar crystals, columnar crystals and dendrite, which consisted of Cr2Ni3, [Formula: see text] phase, M[Formula: see text]C6 and Ni3B phases. When the powder feeding speed reached 4 g/min, the upper bainite occurred in the heat affected zone (HAZ). Moreover, the tensile strength of the joint increased, while the yield strength and the ductility decreased.

Sign in / Sign up

Export Citation Format

Share Document